Hampshire · England
New Build Mastic in Liss
New build mastic across Liss and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Joints pulling apart as timber shrinks
- Plot mastic for developers ahead of handover
- Cracked sealant around new window and door frames
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Disputes or warranty claims with your builder
- Plumbing faults behind the sealant
- Cracking that points to a structural problem
If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Surfaces we seal
- Bathrooms & en suites
- Skirting & floors
- Windows & doors
- Plot handovers
- Show homes
- Kitchens
About our new build mastic in Liss
We work in new homes and on new-build sites across Liss. One shower or a whole phase of plots, the method doesn’t change: remove, clean, prime where needed, then a neat new bead. We work on windows & doors, show homes and bathrooms & en suites, and people most often call us about second-fix sealing on new plots and sealant applied over dusty or wet surfaces.
In smaller places like Liss, new homes tend to come as small developments or single plots. The sealant around baths, showers, frames and skirtings needs to be right from the start.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Liss (GU33)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the quote in Liss
There’s no set price list, because jobs vary so much. The quote depends on:
- How easy the joints are to reach
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What to tell us for a quote
To help us quote quickly, please include:
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- Photos by email, if that is easy
To get a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.
What happens if it’s left?
A hairline gap at a skirting can wait, but a leaking seal can’t. Not sure whether yours can wait? You can phone 0345 464 0079 or drop us an email with a few pictures and we will give you a straight answer. In an older home around Liss, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Why book with us
- ARBOMaster approved applicator
- Neat joints and a tidy finish
- Arbo and Everbuild products
- We agree the colour with you first
Take a look at what affects the cost and our reviews.
How the job changes by surface
Bathrooms and en suites
En suite showers are a common source of leaks into the room below. A proper reseal keeps water in the tray.
Windows and doors
External mastic around new windows and doors is sometimes rushed or missed. It’s resealed with an exterior sealant suited to the frame and wall.
Common questions in Liss
Will you come out to Liss?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for landlords with property near Liss station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or email us with the details for a clear quote.
Can new sealant go on top of the old bead?
No. Sealing over old sealant looks fine for a few weeks, then lifts. We remove every bit of the old bead before resealing.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status and we are fully insured too.
How long does the job take?
That depends on how much there is to do, but as a guide it takes a few hours for most snagging lists, longer for a run of plots. We’ll give you a better idea when we quote.
Do you use white or clear sealant?
It depends on the joint: white or clear in most bathrooms, and a colour to suit worktops, frames and floors elsewhere. We will agree it with you first.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Do you take on second-fix sealing for builders?
Yes. We take on second-fix sealant work across new plots. We clean and prime joints properly to keep callbacks down.
New homes and floors in Liss
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Around Liss, as everywhere, new build mastic is only as good as the preparation behind it.
Liss is about 3 miles north-east of Petersfield, in Hampshire. We provide new build mastic to homeowners, landlords and businesses in Liss, as part of our work across Hampshire. Our Hampshire coverage runs to 683 places, Liss among them. Portsmouth is on our list too, about 18 miles from Liss.
Jobs for new build mastic in GU33 works the same way as everywhere else we cover. If you need new build mastic at a property on Station Road, Shotterfield Terrace and Greenfields or anywhere close by, our applicators can take on the job. Other places close to Liss include West Liss (1 mile south-west), The Mint (1 mile north-east), Liss Forest (1 mile north), Hill Brow (1 mile south-east) and Durford Wood (1 mile south). Further out, we also cover Havant (13 miles south), Horndean (11 miles south-west), Aldershot (15 miles north), Alton (8 miles north-west), Waterlooville (13 miles south-west) and Petersfield (3 miles south-west).
What’s near Liss
Around Liss, our work takes us to homes and buildings near Whistle Stop pub. There’s a railway station in Liss itself: Liss station. Nearby you will also find Petersfield Community Hospital (3.6 miles south-west) and Bear Museum (3.5 miles south-west). The countryside around Liss includes Liss Riverside Railway Walk South and Wheatham Hill.
When to call us in Liss
Once people move in, baths and trays take weight and bed down. A bath sealed empty drops slightly when filled, straining the joint.
It’s worth asking for a quote if you see:
- Gaps opening as the house dries out and settles
- Worktop and upstand sealant coming away
- New-build shower sealant that has already split
- Skirting joints opening in the first winter
If you’ve bought a new home near Liss station, the sealant around baths, showers and frames is worth checking in the first year or two.
What to look for in a quote
- Are they insured?
- How the surfaces are prepared before sealing
- What happens if they find a problem under the old sealant
- The length of the guarantee
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Towns and villages near Liss
Also in Liss
How the visit works
The work is kept neat and contained to the area we are working on, so you can carry on as normal. Expect the work to take a few hours in a single home. In a smaller place like Liss, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First we work through your snagging list or plot schedule with you.
- We cut out every bit of the failed or messy sealant.
- Each joint is cleaned of dust and grit, then primed if required.
- A sealant chosen for each area goes in and is tooled smooth.
- We check every joint and tell you how long each needs to cure.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about parking restrictions
- Clear the area around the work
How to get a quote
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will talk you through the work before giving you a price.