Dundee · Scotland

New Build Mastic in Bucklerheads

Plot mastic for developers and snagging failed sealant in new homes for homeowners, landlords and businesses in Bucklerheads. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Cracked sealant around new window and door frames
  • Gaps between new skirting and floors
  • Worktop and upstand sealant coming away

New build mastic in Bucklerheads

What we can’t put right

We’d rather tell you now than do work that won’t last, so these are the limits:

  • Deciding who is responsible under a builder’s warranty
  • Leaks from pipes, valves or wastes, which need a plumber
  • Movement caused by a poorly fitted tray or bath

If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.

Surfaces we seal

  • Bathrooms & en suites
  • Skirting & floors
  • Windows & doors
  • Show homes
  • Plot handovers
  • Kitchens

How we handle new build mastic in Bucklerheads

We never seal over a failed new-build bead. New silicone won’t bond to old silicone, so the joint is cut out, cleaned, dried and resealed. If you have kitchen sealant that has pulled off the wall and shower seals failing in the first year or two, we can help, whatever the surface.

Many newer homes in Scotland are timber-framed and settle as they dry out, so skirting and floor joints can open up. In older homes, timber floors move through the year too.

We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.

Silicone being applied where a shower enclosure meets beige wall tiles
Location
Bucklerheads (DD5)
Region
Dundee
Cover
12 months on all our work
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026

The process

Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes anything from a few hours to several days, depending on the number of plots, depending on the size of the job. Somewhere like Bucklerheads may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. First we work through your snagging list or plot schedule with you.
  2. Failed or untidy sealant is cut out completely.
  3. Surfaces are cleaned of building dust and primed where needed.
  4. A sealant chosen for each area goes in and is tooled smooth.
  5. Finally, each room is checked and you are given the cure time.

Preparing for the visit

  • Clear the area around the work
  • Tell us about any previous sealing or DIY attempts
  • For business premises, tell us about site rules or sign-in

Ask for a quote

For new build mastic in Bucklerheads, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.

Get a price

Advice

New build mastic in Bucklerheads: local notes

Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up.

Around Bucklerheads, as everywhere, new build mastic is only as good as the preparation behind it. For new homes near Balmossie station, it’s worth checking the sealant early, while snags are still fresh.

Bucklerheads is about 3 miles north of Broughty Ferry, in Dundee. From the centre of Bucklerheads to the outskirts, we cover new build mastic for every kind of property. Our Dundee coverage runs to 50 places, Bucklerheads among them.

Jobs for new build mastic in DD5 is quoted and booked the same way as anywhere else. Other places close to Bucklerheads include Wellbank (1 mile north-east), Kingennie (1 mile east), Drumsturdy (2 miles east), Newbigging (2 miles east) and Monikie (3 miles north-east). Within a short drive, we also cover Dundee (5 miles south-west), Broughty Ferry (3 miles south), Stobswell (4 miles south-west), Monifieth (3 miles south-east), Blackness (6 miles south-west) and Barnhill (3 miles south).

Near you in Bucklerheads

The closest station to Bucklerheads is Balmossie station, roughly 3.1 miles south-east. A little further out are Ballumbie Castle (1.4 miles south-west) and James Guthrie Orchar Art Gallery (3.5 miles south). For a walk, there’s Trottick Mill Ponds.

Map of Bucklerheads © OpenStreetMap contributors

FAQs for Bucklerheads

I let a flat near Balmossie station. Can you help?

Yes. We work for landlords and letting agents as well as householders. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.

Is Bucklerheads within the area you cover?

Yes, Bucklerheads is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.

Can I do it myself?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.

What sealant do you use?

We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.

How long does the job take?

As a guide, most jobs take anything from a few hours to several days, depending on the number of plots. Bigger jobs take longer, and we will say how long yours will take.

Is it messy?

No. The area is protected while we work and cleaned up afterwards.

Where do you work from?

We work from Crawley. Our applicators cover Bucklerheads.

Are you insured?

Yes. Full insurance covers our work.

For landlords and businesses

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.

Looking after it afterwards

After the cure time, these simple habits help:

  • Report sealant problems to your builder during the snagging period
  • Get a leaking seal dealt with straight away
  • Clean sealant with mild detergent, not abrasives
  • Record problems with dated photos

Leave the sealant for the cure time we give you before showering or bathing. Most silicones need around a day to cure enough for use.

Do not let the snagging period run out with sealant problems unreported. After that, putting it right may fall to you so report it promptly.

DIY versus a professional finish

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.

Why deal with it now?

A tube of sealant from the DIY shop won’t fix the cause: grit, unprimed surfaces and old layers underneath. Cutting out, cleaning and priming are what make the difference. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.

The cost depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before we start, so you know where you stand.

Why book with us

  • Quality sealants from Arbo and Everbuild
  • We agree the colour with you first
  • Rated 4.9 stars on Google
  • More than 20 years in sealant work

See what affects the cost and what customers say.

Quotes for new build mastic in Bucklerheads

For a quick quote, just ask. The main things that affect it are:

  • Mould in or behind the old joints
  • The number of rooms or windows
  • The size of the job
  • The product the joint needs

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.

What we need to know

There’s no need for technical detail. It helps if you can tell us:

  • Where the property is
  • If it’s domestic, commercial or a hotel
  • Pictures of the joints, sent by email
  • How many joints, rooms or windows are involved

For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We’ll give you a clear quote before any work starts.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job