Highland · Scotland
Tormore Gutter Sealing
Our applicators work in Tormore on sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old material cut out, joints cleaned and sealed neatly.
- Cracked sealant along roofline trims
- End caps that drip every time it rains
- Water running down the wall below the gutter
How to look after the new joints
Aftercare is simple:
- Check fascia and soffit joints for gaps
- Don’t leave a sagging gutter
- Watch for drips in a downpour
- Don’t lean ladders against the gutter itself
Check the joints after heavy rain. It’s the easiest time to see a leak.
Rain getting in round a garage door frame can damage what’s stored inside. Resealing the frame is a quick job while the frame is sound.
Gutter sealing for homes and businesses in Tormore
Across Tormore, we reseal gutter joints, end caps and roofline trims. Low-level work is straightforward and if it’s higher up, let us know and we’ll confirm what access is needed. We work on gutter joints, gutter end caps and garage door frames, and the jobs we see most are old sealant on roofline trims that has split and leaking gutter joints and stop ends.
In and around a place like Tormore, many buildings face open ground and take the full weather. Gutter joints and wall joints take a battering, so they need a sealant that moves with the building.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Where
- Tormore (PH26)
- Region
- Highland
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Why act early in Tormore
A dripping stop end can soak the wall right through the wet months. Resealing it is a quick job compared with treating damp later. Around Tormore, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and agree the price before starting.
Why book with us
- Over 20 years’ experience
- Homes, businesses and hotels
- Neat joints and a tidy finish
- 12-month guarantee on every job
Take a look at our cost guide or what customers say.
Different surfaces, different methods
Gutter joints
Gutter joints move and sit in water. A gutter sealant made for the job holds best.
Gutter end caps
A leaking end cap sends water straight down the wall. It’s a quick reseal.
What affects the cost of gutter sealing
There’s no set price list. The quote depends on:
- Which sealant suits the joint
- When we can work, for business premises
- How many rooms, windows or areas are involved
- Access and height
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
What to tell us for a quote
To make quoting easier, let us know:
- If someone has resealed it before
- The address or postcode of the job
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Outside joints around Tormore
Harled (roughcast) walls are common in Scotland, and joints where harling meets other materials need a sealant that can grip and flex. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Whether the job is in Tormore itself or nearby, the right material for each joint matters as much as a neat finish.
Tormore is about 16 miles south-east of Forres, in Highland. Our applicators cover gutter sealing for householders, landlords and businesses in Tormore and nearby, as part of our work across Highland. 253 places in Highland are on our list. For nearby work, see our Aberdeen page, about 51 miles away.
We work across PH26 for gutter sealing. We also cover Cromdale (6 miles south-west), Charlestown of Aberlour (9 miles north-east), Grantown-on-Spey (9 miles south-west), Aberlour (9 miles north-east) and Tomintoul (10 miles south). For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.
Near you in Tormore
A little further out are Ballindalloch Castle (2 miles east). The countryside around Tormore includes Loch Mhadadh.
Do you need gutter sealing in Tormore?
Overflowing gutters can look like leaking joints. If the downpipe is blocked, water has nowhere to go, which is why we look before we seal.
Any of these means the joints need attention:
- Damp patches inside below a leaking gutter
- Drips from gutter joints and end caps
- Quick sealant fixes on gutters that didn’t last
- Wet patches on the wall under a gutter joint
Around Tormore, as everywhere, gutter sealing is only as good as the preparation behind it.
What to look for in a quote
- What happens if they find a problem under the old sealant
- Which sealant they’ll use, and why
- How long to leave it before use
- Is the old sealant removed completely?
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. Most jobs take an hour or two for a few joints, longer for a full run. For a place like Tormore, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We find where the water is coming from and check the gutter is sound.
- We remove the old sealant and clean the joint.
- The joint is dried before sealing.
- We seal the joint with a sealant made for gutters.
- We check the run and clear debris near the joints.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Mention any parking rules near the property
- Move anything stored near the joints
Get a quote
Want a quote for gutter sealing? Please email us at info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Read more
Tormore: your questions answered
Is Tormore in your area for gutter sealing?
Yes. We work across all of Scotland, and Tormore is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.
Is gutter sealing in Tormore guaranteed?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you replace gutters or fascias?
Replacement isn’t our trade. We’ll tell you if the gutter needs replacing.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages.
Is it OK to seal over old sealant?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
How do I get a quote for gutter sealing in Tormore?
Every job is different, so each one gets its own quote. To get one, drop us a line at info@mrmastic.co.uk with a short description of the job.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.