Brighton and Hove · England
Gutter Sealing in Stanmer
Problem with your gutter and fascia joints in Stanmer? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Quick sealant fixes on gutters that didn’t last
- Water dripping where gutter sections meet
- Damp on an inside wall under a dripping gutter
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Stanmer and across Brighton and Hove. Several sites can be quoted together.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Gutter sealing in Stanmer, done properly
A leaking gutter joint marks the wall and wets the ground underneath. Resealing the joint is often all it needs if the gutter is not damaged. If you have leaking gutter joints and stop ends and rain getting in around a garage door, we can help, on gutter end caps, roofline trims and garage door frames alike.
Around Stanmer, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
There’s a 12-month guarantee on every job, large or small.
- Place
- Stanmer (BN1)
- Wider area
- Brighton and Hove
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Stanmer
What else we do in Stanmer
What we can’t put right
It helps to know what we cannot do too:
- Gutters that have dropped or pulled away
- Guttering that needs replacing
- Leaks from the roof rather than a joint
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Joints and surfaces we work on
- uPVC fascias
- Gutter end caps
- Roofline trims
- Garage door frames
- Soffit joints
- Gutter joints
Can I do it myself?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Different surfaces, different methods
Soffit joints
Soffit joints are sealed in a colour to suit, where one is available.
uPVC fascias
Open fascia joints look untidy and can let water in. A neat bead closes them up.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Sort out a dripping joint early
- Clean out the gutters once or twice a year
- Check that water runs out of the downpipes
- Rest ladders on the wall, not the gutter
If a gutter starts to sag, get the brackets looked at. Movement will pull the joints open again.
Rain getting in round a garage door frame can damage what’s stored inside. A reseal sorts it while the frame is sound.
How it works
At the end, we look at the finished work together. The work normally takes anything from an hour or two to a few hours, depending on how much there is to do. For a village or hamlet like Stanmer, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Before we arrive
- Mention if the joints have been sealed before
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
Want a quote for gutter sealing? Please call 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.
Read more
What we’re called out for in Stanmer
Gutter joints depend on seals that wear out. Temperature changes make gutters move and that movement opens up tired joints.
These are the problems we are asked about most:
- Earlier gutter repairs that have peeled off
- Dripping gutter ends
- Garage door frames letting rain in
- Damp patches inside below a leaking gutter
If you let a flat or house near Falmer station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Questions to ask before you book
- When the joint can take water or movement
- What happens if they find a problem under the old sealant
- Which sealant they’ll use, and why
- Who turns up on the day
Walls and rooflines in Stanmer
Historic houses like Preston Manor & Gardens (about 2.8 miles south-west) are a reminder that the area around Stanmer has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Homes close to Stanmer Church include some older properties, and old and new materials meet at the roofline and walls, which is where sealant earns its keep. Schools such as Coldean Primary School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s.
Stanmer is about 3 miles north-east of Brighton, in Brighton and Hove. Whether you’re in the middle of Stanmer or further out, gutter sealing is available for homes and businesses alike. Stanmer is one of 30 places in Brighton and Hove we cover for gutter sealing.
Our applicators cover all of the BN1 postcode area for gutter sealing and the streets around it. If you are just outside Stanmer, we cover Hollingbury (1 mile south-west), Moulsecoomb (2 miles south), Bevendean (2 miles south), Patcham (2 miles west) and Hollingdean (2 miles south-west). Within a short drive, we also cover Brighton (3 miles south-west), Brighton and Hove (4 miles south-west), Hove (4 miles south-west), Carlton Hill (3 miles south), Hanover (3 miles south) and West Hill (3 miles south-west).
Around Stanmer
Locally, jobs take us to homes and businesses close to Stanmer Park, University of Sussex Library and Brighton Aldridge Community Academy, among other places. The nearest railway station is Falmer station, roughly 0.8 miles south-east. Nearby you’ll also find Clayton Castle (3.4 miles north-west) and Churchill Square (3.7 miles south-west). Open spaces near Stanmer include Ditchling Beacon and Ladies Mile.
Your questions about gutter sealing in Stanmer
Do you cover smaller places like Stanmer?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Stanmer for gutter sealing?
Yes. Our work covers London and the South East, and Stanmer is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
How long does the job take?
Typically it takes a few hours, depending on the number of joints and the access. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Can you do several jobs on one visit?
Yes. More than one area can be quoted together.
Do you replace gutters or fascias?
No. Our work is sealing joints; replacing gutters and fascias needs a gutter or roofline installer.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.
What guarantee comes with the job?
There’s a 12-month guarantee on every job.
What does gutter sealing cost?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.