Oxfordshire · England

Shiplake Cross Gutter Sealing

Our applicators work in Shiplake Cross on sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.

  • Water dripping where gutter sections meet
  • Old gutter sealant that has let go
  • Gaps along fascia and soffit joints

Gutter sealing in Shiplake Cross

Landlords, agents and businesses in Shiplake Cross

For anyone letting property in or around Shiplake Cross, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.

Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured for the work.

About our gutter sealing in Shiplake Cross

It’s easy to live with a dripping gutter joint, but each shower sends water to the same place. Sealing it is quick while the gutter is still sound. We work on uPVC fascias, roofline trims and soffit joints, and the jobs we see most are drips from gutter joints and end caps and water running down the wall below the gutter.

In a village or hamlet like Shiplake Cross, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.

We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.

Place
Shiplake Cross (RG9)
Region
Oxfordshire
Cover
12 months on all our work
Quote
A clear price before we start
Phone
0345 464 0079
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

How it works

At the end, we look at the finished work together and tell you how long to leave it. The visit itself generally takes anything from an hour or two to a few hours, depending on the size of the job. For a village or hamlet like Shiplake Cross, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We start by tracing the leak and checking the gutter itself is sound.
  2. The joint or trim is cleaned out and old sealant removed.
  3. The area is dried so the sealant can bond.
  4. An exterior or gutter sealant is applied to the joint.
  5. We check the run and clear any debris we find while we’re there.

Before we arrive

  • Let us know about stairs, lifts or work at height
  • For indoor joints, keep the area dry beforehand if you can
  • Tell us if parking is tricky

Getting a quote

Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.

Get a price

Read more

FAQs for Shiplake Cross

Do you cover smaller places like Shiplake Cross?

Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Do you work for landlords with property near Shiplake station?

Yes. We work for letting agents and landlords as well as homeowners. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.

Do you have insurance?

Yes. We’re fully insured, and we can confirm the details when we quote.

Can you fit new guttering?

No. Our work is sealing joints; replacing gutters and fascias needs a gutter or roofline installer.

What information do you need?

Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or email us.

Can new sealant go over the old?

No. Fresh sealant does not stick to old sealant, and it traps any mould or water underneath. We remove it all first.

Can you quote for more than one area?

Of course. Doing several areas at once is normally more efficient.

How long will you be here?

It depends on the size of the job, but most jobs take anything from an hour or two to a few hours. We will give you a better idea when we quote.

How we quote for gutter sealing

You will get a clear quote before any work starts. It takes into account:

  • The product the joint needs
  • Working hours on commercial sites
  • Whether there’s mould to deal with
  • How many areas need sealing

We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.

What we need to know

Before you ask for a quote, have a think about:

  • The rough size of the job
  • Photos by email, if that is easy
  • If it’s domestic, commercial or a hotel
  • How we’d reach the joints

For a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.

When something else is needed

Before booking, it’s worth knowing the limits too:

  • Blocked downpipes
  • Leaks from the roof rather than a joint
  • Brackets that have snapped or loosened

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.

Surfaces we seal

  • Garage door frames
  • Soffit joints
  • Gutter end caps
  • uPVC fascias
  • Gutter joints
  • Roofline trims

Different surfaces, different methods

Gutter joints

Joints between gutter lengths are the most common leak point. They’re cleaned out, dried and resealed.

uPVC fascias

Fascia board joints can open up. They’re sealed tidily in a suitable colour.

When to call us in Shiplake Cross

Sagging sections pull joints apart. Resealing a sagging joint will not last, so the gutter needs refixing first.

Most people get in touch when they notice something like this:

  • Water dripping where gutter sections meet
  • Stop ends leaking at the end of a run
  • Damp on an inside wall under a dripping gutter
  • Old sealant on roofline trims that has split

For landlords with property near Shiplake station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.

Before you book anyone

  • How much experience the applicator has
  • Whether they’re fully insured
  • How long to leave it before use
  • Which sealant they’ll use, and why

Our hiring checklist

Can I do it myself?

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Walls and rooflines in Shiplake Cross

Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Greys Court (about 3.8 miles north-west) are a reminder that the area around Shiplake Cross has older buildings as well as new. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material.

For site and facilities teams at buildings such as Shiplake Church of England School, its movement joints, gutters and trims need looking after like any other building’s. For an older house near a landmark such as Church of St Peter and St Paul, old and new materials meet at the roofline and walls, which is where sealant earns its keep.

Shiplake Cross is about 3 miles north-east of Caversham, in Oxfordshire. Our applicators cover gutter sealing for householders, landlords and businesses in Shiplake Cross and nearby. Our Oxfordshire coverage runs to 443 places, and Shiplake Cross is one of them.

Every address in RG9 is covered for gutter sealing. That includes homes and businesses on Memorial Avenue, Plowden Way and Orchard Close and the roads around them. Close by, we work in Binfield Heath (1 mile west), Harpsden (1 mile north), Harpsden Bottom (2 miles north-west), Henley-on-Thames (2 miles north) and Sonning Common (4 miles west). Within a short drive, we also cover Benson (12 miles north-west), Chinnor (14 miles north), Tilehurst (6 miles south-west), Wallingford (12 miles north-west), Little Heath (7 miles south-west) and Oakley (14 miles north).

Landmarks near Shiplake Cross

Around Shiplake Cross, our work takes us to homes and buildings near The Plough pub, The Piggott School and Blessed Hugh Faringdon Catholic School, among other places. For rail, the closest station is Shiplake station, about 1.1 miles north-east of the centre. Well-known places in the area include Royal Berkshire Hospital (4.3 miles south-west) and Frazer Nash Archives (2 miles north). Green spaces nearby include Sonning Hill and South Lake.

Map of Shiplake Cross © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job