Oxfordshire · England
Commercial & hotel sealant in Shiplake Cross, Oxfordshire
Sealant work for offices, hotels, washrooms and commercial buildings for homeowners, landlords and businesses in Shiplake Cross. Fully insured, ARBOMaster approved and guaranteed for a year.
- Silicone laid over old silicone by a previous contractor
- Washrooms that need sorting before an inspection
- Split sealant around staff kitchen worktops and sinks
Commercial sealant in Shiplake Cross
Mr Mastic brings more than 20 years’ experience to commercial sites, and we’re fully insured and ARBOMaster approved. Tell us what paperwork your site needs, such as RAMS or insurance details, and we will confirm what we can supply with the quote. Common call-outs are for too many rooms to reseal without closing the building and failed joints in office kitchens and tea points, across rental portfolios, retail & leisure sites and welfare facilities.
If you have holiday lets, a converted barn used for business or a community building near Shiplake Cross, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
All of our work is guaranteed for twelve months.
- Place
- Shiplake Cross (RG9)
- Region
- Oxfordshire
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Commercial buildings in Shiplake Cross
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Managing a site like Shiplake Church of England School? Then sealant in washrooms, kitchens and changing areas can be renewed around term times or opening hours. Letting a property close to Shiplake station? Then sealant work can be quoted for a single flat or a whole portfolio. For buildings such as Church of St Peter and St Paul, halls and community kitchens see heavy use, and their sealant shows it.
Shiplake Cross is about 3 miles north-east of Caversham, in Oxfordshire. From the centre of Shiplake Cross to the outskirts, commercial sealant is available for homes and businesses alike. Our area takes in 443 places across Oxfordshire, large and small.
Every address in RG9 is covered for commercial sealant, from the main roads to the quietest streets. Local streets include Memorial Avenue, Plowden Way and Orchard Close. If you are just outside Shiplake Cross, we cover Binfield Heath (1 mile west), Harpsden (1 mile north), Harpsden Bottom (2 miles north-west), Henley-on-Thames (2 miles north) and Sonning Common (4 miles west). Larger places within reach include Benson (12 miles north-west), Chinnor (14 miles north), Tilehurst (6 miles south-west), Wallingford (12 miles north-west), Little Heath (7 miles south-west) and Oakley (14 miles north).
Around Shiplake Cross
Typical jobs here are in homes near The Plough pub, The Piggott School and Blessed Hugh Faringdon Catholic School and the streets around them. The closest station to Shiplake Cross is Shiplake station, about 1.1 miles north-east of the centre. Well-known places in the area include Royal Berkshire Hospital (4.3 miles south-west) and Frazer Nash Archives (2 miles north). The countryside around Shiplake Cross includes Sonning Hill and South Lake.
Landlords, agents and businesses in Shiplake Cross
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
We also work for property managers and facilities teams. We can quote a run of properties together.
What we cannot put right
We will always be straight with you, so here’s what new sealant won’t do:
- Faulty shower valves and leaking traps
- Fire risk assessments or certification
- Extraction that is not working, which needs an electrician or ventilation contractor
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.
Where we work in Shiplake Cross
- Welfare facilities
- Student & care accommodation
- Retail & leisure sites
- Office washrooms & kitchens
- Hotel bathrooms
- Rental portfolios
How the visit works
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours per area, with larger sites planned over several visits. Somewhere as small as Shiplake Cross, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by looking at the rooms and agreeing what’s needed.
- We agree when we will work, with early or out-of-hours slots where they can be arranged.
- Each area is protected and stripped of old sealant.
- Joints are dried, then resealed and tooled neatly.
- Housekeeping or site staff are told when each area can be used.
How to prepare
- Try not to wet indoor joints just before the visit
- Let us know about earlier repairs to the joints
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.
Read more
What happens if it’s left?
Sealant work is quick by the room: it takes as long as the scope needs, from one welfare room to a full building. Each area is then left to cure for the time we give you, so planning the order matters more than the hours on site. Where a wall is exposed, as many are in small places like Shiplake Cross, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit is generally more efficient than separate visits. You will get one clear quote for the whole job.
Why choose Mr Mastic in Shiplake Cross
- We never seal over old sealant
- We agree the colour with you first
- ARBOMaster approved applicator
- Full insurance on every job
Read what affects the cost and customer reviews.
How we quote for commercial sealant
Call for a quick quote. The main things that affect it are:
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- How easy the joints are to reach
- Which sealant suits the joint
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- The problem you’ve noticed
- A few pictures by email, if you can
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
We quote each job on its own, so the first step is telling us about yours. Just ring 0345 464 0079 or send us an email with the details.
Also near Shiplake Cross
What else we do in Shiplake Cross
Shiplake Cross questions
Can you help a landlord with a rental near Shiplake station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Do you cover smaller places like Shiplake Cross?
Yes. Shiplake Cross is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we’re using and why.
What should I tell you?
A short description and the location, plus pictures if you have them. If we need more, we will ask.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint.
How long does commercial sealant take?
Most jobs take a few hours per area, with larger sites planned over several visits. Your quote will say how long we expect yours to take.
Can I add another job to the visit?
Yes, we can. More than one area can be quoted together.
Looking after it afterwards
After the cure time, these simple habits help:
- Put a squeegee in each shower
- Ask cleaners to go gently on the silicone
- Act on lifting sealant before it leaks
- Schedule work around occupancy
We give a cure time for every area we finish, which is usually around 24 hours. Pass it on to housekeeping or cleaners so the new sealant isn’t wetted or scrubbed too soon.
Mould in shared washrooms gets noticed and talked about. Left long enough, it spreads through the bead, so the fix is replacement.