Kent · England
Riverhead Gutter Sealing
Specialist gutter sealing for Riverhead: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Wet patches on the wall under a gutter joint
- Drips from gutter joints and end caps
- Stop ends leaking at the end of a run
How the visit works
When we arrive, we look over the joints with you first. Surfaces next to the work are protected before work begins. The work usually takes a few hours, depending on the number of joints and the access. In a smaller place like Riverhead, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We look at where the water is coming from and check the gutter isn’t broken or sagging.
- Old sealant and dirt are removed from the joint.
- The joint is dried, because sealant won’t bond to a wet surface.
- We seal the joint with a sealant made for gutters and outdoor use.
- We check the run and clear any debris we find while we’re there.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Keep children and pets away from the work area
- Mention any parking rules near the property
How to get a quote
Want a quote for gutter sealing? Please call 0345 464 0079 or drop us an email with a few details. We’ll explain what we’d do and send you a clear quote before work begins.
Advice
About our gutter sealing in Riverhead
For gutter sealant to hold, the joint has to be clean and dry. So the old sealant and grime come out first and the joint is dried before the new sealant goes in. If you have old gutter sealant that has let go and streaks down the brickwork from a leaking joint, we can put it right, whatever the surface.
Outbuildings, garages and conservatories around homes in places like Riverhead add more joints to look after. Leaks generally start at a gutter end, a garage door frame or where an extension meets the house.
There’s a 12-month guarantee on every job.
- Location
- Riverhead (TN13, TN14)
- Region
- Kent
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Riverhead buildings and the weather
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Knole House (about 2 miles south-east) nearby, there’s older building stock in the area around Riverhead as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
For an older house near a landmark such as Church of St Mary, an extension built onto an older house moves differently, and the joint between them takes the strain. Rented homes near Sevenoaks station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Riverhead is about 1 mile west of Sevenoaks, in Kent. If you need gutter sealing in Riverhead, it’s easy to get a quote: please ring 0345 464 0079 or drop us an email. We cover Kent from our Crawley base. Across Kent, we cover 922 places, Riverhead among them. London is on our list too, around 19 miles away.
Here we cover the TN13 and TN14 postcode area for gutter sealing. If you need gutter sealing at a property on London Road, Hamlin Road and Witches Lane or anywhere close by, our applicators can take on the job. Nearby, we also carry out gutter sealing in Dunton Green (1 mile north), Bessels Green (1 mile south-west), Sevenoaks (1 mile east), Chipstead (1 mile west) and Kippington (1 mile south). We also work in nearby towns such as Maidstone (15 miles east), Dartford (11 miles north), Royal Tunbridge Wells (11 miles south), Gravesend (14 miles north-east), Tonbridge (8 miles south-east) and Northfleet (13 miles north-east).
Around Riverhead
Locally, jobs take us to homes and businesses close to The Beehive Public House, Trinity School and Montreal Park. Riverhead’s nearest station is Sevenoaks station, roughly 0.8 miles south-east. Nearby you’ll also find Kemsing Castle Bank (3 miles north-east) and Sevenoaks Museum (1.4 miles south-east). For a walk, there’s Dryhill Nature Reserve and Betsom's Hill.
Signs you need gutter sealing in Riverhead
Sealant on fascias and trims weathers like any outdoor joint. It goes hard, cracks and pulls away after some years.
These are the problems we’re asked about most:
- Dripping gutter ends
- Old sealant on roofline trims that has split
- Wet patches on the wall under a gutter joint
- Quick sealant fixes on gutters that didn’t last
Schools such as Amherst School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s.
What your quote should include
- Who does the work, and how experienced they are
- How the joint is cleaned and prepared
- Are they insured?
- When the joint can take water or movement
What affects the cost of gutter sealing
The price is agreed before any work begins. It takes into account:
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- Which sealant suits the joint
- Any mould that needs treating
Combining jobs into one visit is normally more efficient than separate visits. You will get one clear quote for the whole job.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- What the problem is, such as mould, gaps, leaks or cracking
- Where the property is
- Any previous sealing or DIY work
- Roughly how big the job is
We quote each job on its own, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details.
Questions from Riverhead
I let a flat near Sevenoaks station. Can you help?
Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.
Will you come out to Riverhead?
Yes. Riverhead is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How long does gutter sealing take?
It depends on the size of the job, but most jobs take a few hours, depending on the number of joints and the access. We will give you a better idea when we quote.
Do you replace gutters or fascias?
No, we reseal joints, end caps and trims. Replacement needs a gutter installer or roofer.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Do you work for hotels and businesses?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.
Do you seal gaps in fascias and soffits?
Yes. Our work is the joints and we’ll let you know if a board has failed.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access.
What sealant work cannot fix
In fairness, some problems need a different trade:
- Problems with the roof covering
- Blocked downpipes
- Gutters that have dropped or pulled away
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
What we seal
- Roofline trims
- Garage door frames
- Gutter end caps
- Gutter joints
- uPVC fascias
- Soffit joints
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Get leaks sealed before the wet months
- Clear leaves and moss from the gutters
- Check the gutters during heavy rain
- Don’t lean ladders against the gutter itself
While checking gutters, glance at the fascia joints too. A small split is quicker to put right.
Early sealing limits how much water hits the wall. We will let you know if the gutter needs more than sealant.
Places near Riverhead
More services for Riverhead
What happens if it’s left?
Replacing guttering is a much bigger job than sealing joints. Where the gutter is in good order and only a joint leaks, resealing is the sensible fix. If it’s broken or sagging, a gutter installer needs to look. Homes in smaller places like Riverhead can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What you get with us
- Homes, businesses and hotels
- We agree the colour with you first
- We never seal over old sealant
- A sealant colour to suit the surroundings
Take a look at how sealant jobs are priced and customer reviews.