Kent · England

Gutter, fascia & soffit sealing in Richborough Port, Kent

Professional gutter sealing in and around Richborough Port, with every bit of old sealant taken out first and a 12-month guarantee.

  • Open joints in fascias and soffits
  • Damp on an inside wall under a dripping gutter
  • Earlier gutter repairs that have peeled off

Gutter sealing in Richborough Port

Gutter sealing for homes and businesses in Richborough Port

For gutter sealant to hold, the joint has to be clean and dry. That is why we take out the old sealant and dirt first, then dry the joint before sealing. If you have damp patches inside below a leaking gutter and dripping gutter ends, we can help.

Outside joints can only be sealed when they’re dry, so work in Richborough Port is booked around the forecast. Tell us about access to all sides of the building, including outbuildings and garages.

Every job comes with our one-year guarantee, wherever you are in Kent.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Place
Richborough Port (CT13)
Region
Kent
Guarantee
One year on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

Walls and rooflines in Richborough Port

Richborough Port is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you let a flat or house near Thanet Parkway station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. Quex Park, about 4.3 miles north, is one of the historic houses in the wider area around Richborough Port, and older homes nearby need a sealant that suits their walls.

Richborough Port is about 4 miles south-west of Ramsgate, in Kent. We carry out gutter sealing for homes and businesses in Richborough Port and the surrounding area, as part of our work across Kent. Richborough Port is one of 922 places in Kent where we work for gutter sealing. Chelmsford is on our list too, around 48 miles away.

Jobs for gutter sealing in CT13 works the same way as everywhere else we cover. Nearby, we also carry out gutter sealing in Ebbsfleet (1 mile north), Sevenscore (2 miles north), Cliffs End (2 miles north-east), Way (2 miles north) and Pegwell (2 miles north-east). Within a short drive, we also cover Canterbury (12 miles west), Margate (5 miles north), Dover (12 miles south), Ramsgate (4 miles north-east), Broadstairs (5 miles north-east) and Whitstable (14 miles west).

Around Richborough Port

In Richborough Port, that means homes and buildings near Sandwich and Pegwell Bay and the streets around them. For rail, the closest station is Thanet Parkway station, roughly 1.8 miles north of the centre. Well-known places in the area include Ramsgate General Hospital (3.2 miles north-east) and White Mill (2.1 miles south-west). The countryside around Richborough Port includes Sandwich and Pegwell Bay.

Map of Richborough Port © OpenStreetMap contributors

Why act early in Richborough Port

A dripping stop end can soak the wall right through the wet months. Resealing it is a quick job before the damage spreads. Around Richborough Port, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.

Why book with us

  • Sealant colour chosen to suit
  • White, clear, grey or another colour, product permitting
  • One-year guarantee on every job
  • We agree the colour with you first

Read what affects the cost or our reviews.

How we quote for gutter sealing

There’s no set price list, because jobs vary so much. The quote depends on:

  • Which sealant suits the joint
  • How many rooms, windows or areas are involved
  • Whether the work is at height
  • Mould in or behind the old joints

What you pay reflects the work, not a rough estimate. That is why we ask a few questions first and send you a clear quote before work begins.

Helping us quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Any access issues, like height or stairs
  • How many joints, rooms or windows are involved
  • If it’s domestic, commercial or a hotel
  • Where the property is

Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or drop us an email.

What sealant work can’t fix

A few problems are outside what sealant work can do:

  • Cracked, split or warped gutter sections
  • Rotten or damaged fascia boards
  • Gutters that have dropped or pulled away

If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.

Where we work in Richborough Port

  • Soffit joints
  • Roofline trims
  • uPVC fascias
  • Gutter joints
  • Garage door frames
  • Gutter end caps

How the job changes by surface

uPVC fascias

Fascia board joints can open up. We seal them neatly in a suitable colour.

Gutter end caps

End caps are resealed where they meet the gutter, after cleaning and drying.

Work for landlords, hotels and businesses

In hotels, rooms out of use cost money, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.

Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

FAQs for Richborough Port

Do you cover smaller places like Richborough Port?

Yes, Richborough Port is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

I let a flat near Thanet Parkway station. Can you help?

Yes, we work for letting agents and landlords. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.

Do you seal gaps in fascias and soffits?

Yes, often alongside gutter joints. Each joint is cleaned and sealed with a suitable exterior sealant.

Will you clear out my gutters?

We clean the joints we are sealing and clear debris we find nearby. A full gutter clean is a separate service.

How long should I leave it?

It depends on the product. We tell you how long to leave it before we go.

Is the work guaranteed?

There’s a 12-month guarantee on every job.

Do you install new fascias or gutters?

Replacement is not our trade. If a gutter is broken or sagging, we will tell you so you can call the right trade.

Are you an approved applicator?

Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.

Signs you need gutter sealing in Richborough Port

Sealant on fascias and trims weathers like any outdoor joint. It hardens, shrinks and splits over time.

Keep an eye out for any of the following:

  • Cracked sealant along roofline trims
  • Stop ends leaking at the end of a run
  • Quick sealant fixes on gutters that didn’t last
  • Internal damp traced to a gutter joint

Managing a site like Sir Roger Manwood's School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.

Comparing quotes

  • How much experience the applicator has
  • Whether they seal over old material or remove it
  • How hidden problems are handled
  • Which colour the sealant will be

Choosing a sealant specialist

How it works

On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes an hour or two for a few joints, longer for a full run from start to finish. Somewhere like Richborough Port needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we agree which joints need sealing.
  2. We clean out each joint.
  3. We make sure everything is dry.
  4. We apply exterior or gutter sealant and finish it neatly.
  5. The joints are checked once sealed.

How to prepare

  • Tell us about any water getting in
  • Mention if the joints have been sealed before
  • Tell us about access, such as stairs, a lift or high-level joints

Ask for a quote

We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or drop us an email with the details, and photos are welcome.

Ask for a quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job