Greater London · England
Gutter, fascia & soffit sealing in Pollards Hill, Greater London
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims in Pollards Hill, with a 12-month guarantee on every job. Ask us for a quote.
- Cracked sealant along roofline trims
- Damp patches inside below a leaking gutter
- Wet patches on the wall under a gutter joint
Gutter sealing in Pollards Hill: local notes
London terraces and converted houses often share gutters, downpipes and walls, so check who is responsible for the outside before booking. Historic houses like Kingswood House (about 1.9 miles north-east) are a reminder that the area around Pollards Hill has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
As a London address, Pollards Hill can be tricky for parking: tell us about permits, visitor bays or off-street space when you book. Homes close to St Oswald include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Pollards Hill is about 1 mile north of Thornton Heath, in Greater London. From the centre of Pollards Hill to the outskirts, we cover gutter sealing for every kind of property. Pollards Hill is one of 764 places in Greater London we cover for gutter sealing. Our London page covers work nearby, about 6 miles away.
All of CR7, SW16 and SE19 is covered for gutter sealing. You will find streets such as Green Lane, Croft Road and Downs Road, and we cover them all. If you’re just outside Pollards Hill, we cover Norbury (1 mile north), Thornton Heath (1 mile south), Streatham (2 miles north-west), Streatham Park (2 miles north-west) and Mitcham (2 miles west). Within a short drive, we also cover London (6 miles north), City of Westminster (8 miles north), Marylebone (8 miles north), Kensington (7 miles north-west), St Pancras (8 miles north) and Shoreditch (8 miles north).
Landmarks near Pollards Hill
In Pollards Hill, that means homes and buildings near Norbury Manor Business and Enterprise College for Girls, Silburn Reid and The Moon Under Water pub, among other places. The nearest railway station is Norbury station, about 0.6 miles west. Well-known places in the area include Crystal Palace Museum (1.5 miles north-east) and Croydon University Hospital (1.3 miles south). For a walk, there’s Knight's Hill and Biggin Wood.
About our gutter sealing in Pollards Hill
Our work covers gutter joints and end caps as well as fascias and soffits plus roofline trims and garage door frames. It’s joint work, not replacing the gutter. If you have old gutter sealant that has let go and damp on an inside wall under a dripping gutter, we can put it right.
In London terraces and converted houses, gutters and walls are often shared with the house next door, so one failed joint can cause damp for more than one household. For a flat in Pollards Hill, check the lease for who looks after the outside.
All of our work is guaranteed for twelve months.
- Where
- Pollards Hill (CR7, SW16, SE19)
- Region
- Greater London
- Guarantee
- 12 months on all our work
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Surface by surface
Garage door frames
Frame-to-brick joints face the weather. An exterior sealant suits them.
uPVC fascias
Joints between fascia boards can open over time. They’re sealed tidily in a suitable colour.
How we quote for gutter sealing
The price is agreed before any work begins. It takes into account:
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
- Whether there’s mould to deal with
- The type of sealant required
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Whether it’s a home or a business
- How we’d reach the joints
- A few photos by email, if you can
- If someone has resealed it before
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear price before we start.
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Nearby places to Pollards Hill
What else we do in Pollards Hill
Signs you need gutter sealing in Pollards Hill
Gutter joints rely on seals that age. Temperature changes make gutters move, and old seals crack or slip.
Look out for any of the following:
- Trim joints where the sealant has failed
- Earlier gutter repairs that have peeled off
- Open joints in fascias and soffits
- Stop ends leaking at the end of a run
Managing a site like Kensington Avenue Primary School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
What your quote should include
- How hidden problems are handled
- What the quote includes, VAT included or not
- Whether they seal over old material or remove it
- What preparation is included
The process
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes a few hours, depending on the number of joints and the access and we leave things clean and tidy. Many London jobs are in flats, so we come ready for stairs, narrow hallways and shared entrances. If the building has a concierge, managing agent or access rules, tell us when you book.
- We look at where the water is coming from and check the gutter isn’t broken or sagging.
- Old sealant and dirt are removed from the joint.
- The area is dried so the sealant can bond.
- We seal the joint with a sealant made for gutters and outdoor use.
- The run is checked and any debris near the joints is cleared.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Clear the area around the work
- Mention if the joints have been sealed before
Ask for a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Advice
Honest limits
It helps to know what we can’t do:
- Downpipes that are blocked or broken
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Boards that have decayed or split
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Surfaces we seal
- Roofline trims
- Gutter end caps
- Soffit joints
- Garage door frames
- Gutter joints
- uPVC fascias
FAQs for Pollards Hill
Can you help a landlord with a rental near Norbury station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Can you do gutter sealing in Pollards Hill?
Yes. Our work covers London and the South East, and Pollards Hill is part of that. You can phone 0345 464 0079 or email us and tell us what needs doing, and we will give you a clear quote.
Do you offer different sealant colours?
We will suggest a colour to suit the surroundings. The product needed can limit the range.
What does gutter sealing cost?
Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or drop us an email with a short description of the job.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
How long does gutter sealing take?
That depends on how much there is to do, but as a guide it takes an hour or two for a few joints, longer for a full run. We will give you a better idea when we quote.
Will sealant fix a dripping gutter joint?
In many cases, yes. Cleaning, drying and resealing the joint generally works. If the section is split or warped, it needs replacing.
What about gutters on a second or third storey?
Single-storey and low-level gutters are straightforward. If it’s higher up, let us know and we’ll confirm the access.
Aftercare tips
So the new joints stay in good condition:
- Deal with a drip before winter
- Make sure downpipes aren’t blocked
- Check fascia and soffit joints for gaps
- Rest ladders on the wall, not the gutter
Give the sealant the cure time we tell you and avoid disturbing it.
Leaking gutter joints get worse over time. Water keeps hitting the same part of the wall, which can lead to staining and damp.