Hampshire · England
Gutter, fascia & soffit sealing in Ossemsley, Hampshire
Gutter sealing in Ossemsley from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Damp patches inside below a leaking gutter
- Old gutter sealant that has let go
- Trim joints where the sealant has failed
Keeping the joints in good condition
How long the joints last depends on use and care. Here’s what we suggest:
- Keep an eye out for wet patches below a joint
- Get leaks sealed before the wet months
- Check that water runs out of the downpipes
- Do not lean ladders against the gutter itself
Clear the gutters once or twice a year so water does not sit on the joints. Water left in a gutter tests every joint.
Once roofline sealant splits, water can get behind it. Resealing early protects the boards and the wall below.
Gutter sealing in Ossemsley
A drip at a gutter joint is easy to ignore, but the water lands on the same spot every time it rains. Resealing it is a small job while the gutter is still sound. We’re often asked to deal with internal damp traced to a gutter joint and dripping gutter ends, across gutter end caps, gutter joints and roofline trims.
External sealant needs dry, clean surfaces, so work around Ossemsley is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Ossemsley (BH25)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Landlord and commercial work in Ossemsley
We also work for property managers and facilities teams. We can quote a run of properties together.
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
What affects the quote in Ossemsley
We quote each job individually. This is what makes a difference:
- Any working-time requirements on site
- Any mould that needs treating
- The type of sealant required
- The old material and how stubborn it is
Combining jobs into one visit is usually more efficient than separate visits. You will get one clear quote for the whole job.
What to tell us for a quote
Before you ask for a quote, have a think about:
- The address or postcode of the job
- A few pictures by email, if you can
- How we’d reach the joints
- The problem you’ve noticed
Need a quote? Please call 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
What we do, step by step
Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take an hour or two for a few joints, longer for a full run. In a small place like Ossemsley, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by tracing the leak and checking the gutter itself is sound.
- Old sealant and dirt are removed from the joint.
- The area is dried so the sealant can bond.
- An exterior or gutter sealant is applied to the joint.
- The run is checked and any debris near the joints is cleared.
Preparing for the visit
- Let us know about parking restrictions
- For business premises, tell us about site rules or sign-in
- Clear the area around the work
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or send us an email.
Read more
Ossemsley buildings and the weather
Ossemsley is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Schools such as Ballard School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. If you let a flat or house near New Milton station, leaking gutter joints on a rental are best caught before they stain the walls. For an older house near a landmark such as St John, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Ossemsley is about 2 miles north of New Milton, in Hampshire. Anywhere in BH25, we cover gutter sealing for homes and businesses. Ossemsley is one of 683 towns and villages in Hampshire we cover for gutter sealing. For nearby work, see our Southampton page.
All of BH25 is covered for gutter sealing, from the main roads to the quietest streets. Gutter sealing is available to properties on Green Lane and Ossemsley South Drive. Close by, we work in Bashley (1 mile south-east), Wootton (1 mile north), Tiptoe (2 miles east), Mead End (2 miles east) and Ashley (2 miles south-east). We also work in nearby towns such as Totton (12 miles north-east), Lymington (5 miles east), Hythe (13 miles north-east), Ringwood (7 miles north-west), Barton on Sea (3 miles south) and Dibden Purlieu (12 miles north-east).
Landmarks near Ossemsley
In Ossemsley, that means homes and buildings near The Arnewood School and The Rising Sun pub and the streets around them. Ossemsley’s nearest station is New Milton station, roughly 1.7 miles south. A little further out are Highcliffe Castle (3.5 miles south-west) and Sammy Miller Motorcycle Museum (1 mile south). The countryside around Ossemsley includes Milford on Sea LNR.
FAQs for Ossemsley
Do you work for landlords with property near New Milton station?
Yes. We work for landlords and agents as well as homeowners. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear quote.
Is Ossemsley within the area you cover?
Yes. Ossemsley is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Will sealant fix a dripping gutter joint?
Most of the time. If the gutter is sagging or cracked, sealing will not last and we will say so.
What guarantee comes with the job?
Our one-year guarantee covers every job.
Do you work for hotels and businesses?
Yes. We’ve worked for hotels, offices and other businesses and we are fully insured.
Do you install new fascias or gutters?
No, we reseal joints and trims. A gutter installer or roofer deals with replacement.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
How long does gutter sealing take?
That depends on how much there is to do, but as a guide it takes anything from an hour or two to a few hours. We’ll give you a better idea when we quote.
DIY versus a professional finish
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
More services for Ossemsley
Why act early in Ossemsley
New gutters cost far more than a few resealed joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it has failed, we’ll tell you. Around Ossemsley, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will explain what it covers.
What you get with us
- White, clear, grey or coloured to suit, where the product allows
- 4.9 on Google from 180+ five-star reviews
- Colour agreed with you before we start
- Fully insured
Read our cost guide or our reviews.
Different surfaces, different methods
Gutter end caps
End caps take the pressure of water running along the gutter. A failed seal makes them leak.
Roofline trims
Trim joints are cut out and resealed suited to the material.