Hampshire · England
Gutter Sealing in Longparish
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homes and businesses in Longparish and across Hampshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Old sealant on roofline trims that has split
- Failed sealant on a garage door frame
- Wet patches on the wall under a gutter joint
About our gutter sealing in Longparish
Our work covers gutter joints and end caps as well as fascias and soffits, along with roofline trims and garage door frames. It’s joint work, not replacing the gutter. Typical jobs include stop ends leaking at the end of a run and internal damp traced to a gutter joint, across uPVC fascias, garage door frames and soffit joints.
Older homes in small places like Longparish may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water normally gets in, and they need the right sealant at the right depth.
Your job is guaranteed for a year, as with all our work.
- Place
- Longparish (SP11)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need gutter sealing in Longparish
Water spilling over a blocked gutter is often mistaken for a leak. If the downpipe is blocked, water has nowhere to go, which is why we look before we seal.
These are the problems we’re asked about most:
- Drips from gutter joints and end caps
- Water running down the wall below the gutter
- Cracked sealant along roofline trims
- Earlier gutter repairs that have peeled off
Letting a property close to Whitchurch (Hampshire) station? Then leaking gutter joints on a rental are best caught before they stain the walls.
Before you book anyone
- Whether they’re fully insured
- What happens if the job turns out different
- How much experience the applicator has
- Whether VAT is included
Leave it or put it right?
You don’t need new fascias just because the joints have opened. A neat seal closes the gaps if the boards are sound. Older cottages and farmhouses around Longparish can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
What you get with us
- You choose the colour before work begins
- A 12-month guarantee on all work
- Over 20 years’ experience
- We never seal over old sealant
See what affects the cost and customer reviews.
FAQs for Longparish
Do you cover smaller places like Longparish?
Yes, Longparish is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
I let a flat near Whitchurch (Hampshire) station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Is gutter cleaning part of the job?
Only around the joints we seal, so the sealant can bond. Cleaning the whole run is a separate job.
Can sealant stop a sagging gutter leaking?
No. A sagging gutter pulls its joints apart, so the brackets need fixing first.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
When is the sealant fully cured?
It depends on the product. We tell you how long to leave it before we go.
Can a leaking gutter joint be sealed?
In many cases, yes. A clean, dry joint resealed with gutter sealant usually stops the drip. A split or warped section needs replacing.
What the job involves on each surface
Roofline trims
Trims along the roofline are often finished with sealant. Split sealant lets water in.
uPVC fascias
We seal fascia joints, not replace the boards. If boards are damaged, we will tell you.
Honest limits
We will not take on work that won’t last, so these are the limits:
- Rotten or damaged fascia boards
- Water backing up from a blocked pipe
- A gutter length that has split
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Roofline trims
- uPVC fascias
- Garage door frames
- Gutter end caps
- Gutter joints
- Soffit joints
What happens on the day
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes an hour or two for a few joints, longer for a full run. For a village or hamlet like Longparish, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at where the water is coming from and check the gutter is not broken or sagging.
- We clean out the joint and take out the old sealant.
- The joint is dried, because sealant won’t bond to a wet surface.
- Gutter or exterior sealant is applied and finished.
- We look along the gutter and clear debris around the joints.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about parking restrictions
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Advice
Walls and rooflines in Longparish
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Schools such as Longparish Church of England Primary School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. For an older house near a landmark such as Church of St Nicholas, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Longparish is about 5 miles east of Andover, in Hampshire. Homes, rented property, offices and hotels in Longparish can book us for gutter sealing, old or new, large or small. Every job comes with our 12-month guarantee. Longparish is one of 683 towns and villages in Hampshire where we work for gutter sealing. For nearby work, see our Southampton page (19 miles or so).
All of SP11 is covered for gutter sealing. Gutter sealing is available to properties on Mill Lane and Southside Road. Neighbouring places we cover for gutter sealing include Middleton (1 mile west), Barton Stacey (2 miles south), Egypt (3 miles south-east), Sutton Scotney (3 miles south-east) and Hunton (4 miles south-east). We also work in nearby towns such as Basingstoke (13 miles east), Winchester (10 miles south), Andover (5 miles west), Chandler's Ford (14 miles south), Romsey (15 miles south) and Tadley (15 miles north-east).
What’s near Longparish
In Longparish, that means homes and buildings near The Cricketers Inn and the streets around them. For rail, the closest station is Whitchurch (Hampshire) station, roughly 3.5 miles north-east. Other landmarks nearby include Finkley Down Farm Museum (3.6 miles north-west) and Andover War Memorial Hospital (5.1 miles west). For a walk, there’s Anton Lakes and Mill Lake.
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Watch the wall under the gutters for staining
- Rest ladders on the wall, not the gutter
- Have sagging gutters refixed early
- Glance at the soffit joints now and then
While checking gutters, glance at the fascia joints too. Splits are easier to seal early.
A leaking garage frame lets water reach stored items. Resealing the frame is a quick job.
Places near Longparish
Also in Longparish
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.