Reading · England

Gutter, fascia & soffit sealing in Kidmore End, Reading

Gutter sealing across Kidmore End and nearby, with old sealant always removed completely and a 12-month guarantee.

  • Gaps along fascia and soffit joints
  • Old sealant on roofline trims that has split
  • Damp on an inside wall under a dripping gutter

Gutter sealing in Kidmore End

Gutter sealing in Kidmore End

A drip at a gutter joint is easy to ignore, but each shower sends water to the same place. Sealing it is quick if the gutter is otherwise in good order. If you are dealing with quick sealant fixes on gutters that didn’t last and damp on an inside wall under a dripping gutter, we can help, on uPVC fascias, roofline trims and garage door frames alike.

Outside joints can only be sealed when they’re dry, so work in Kidmore End is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.

All our work comes with a 12-month guarantee.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Where
Kidmore End (RG4)
Region
Reading
Cover
One year on every job
Quote
A clear price before we start
Phone
0345 464 0079
Updated
26 October 2026

Landlord and commercial work in Kidmore End

In hotels, rooms out of use cost money, so we plan the work room by room. We have worked in hotels as well as homes and businesses.

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll quote.

When something else is needed

We will always be straight with you, so here’s what sealant cannot fix:

  • A gutter length that has split
  • Problems with the roof covering
  • Brackets that have snapped or loosened

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.

Where we work in Kidmore End

  • uPVC fascias
  • Soffit joints
  • Gutter joints
  • Garage door frames
  • Roofline trims
  • Gutter end caps

What we do, step by step

You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes an hour or two for a few joints, longer for a full run for a typical job. Somewhere as small as Kidmore End, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First we agree which joints need sealing.
  2. Each joint is cleaned and any old sealant removed.
  3. The joints are dried.
  4. We apply exterior or gutter sealant and finish it neatly.
  5. We check our work before we leave.

Preparing for the visit

  • For indoor joints, keep the area dry beforehand if you can
  • Let us know if you’ve seen damp or leaks
  • Mention any sign-in or site rules at work premises

Ask for a quote

If you are in Kidmore End and need gutter sealing, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before we start.

Get a quick quote

Related advice

Kidmore End buildings and the weather

Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. With historic houses such as Mapledurham House (about 2.3 miles south-west) nearby, there’s older building stock in the area around Kidmore End as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.

For site and facilities teams at buildings such as Kidmore End Church of England Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around Church of St John the Baptist, older walls, gutters and the joints where extensions meet them need a flexible sealant.

Kidmore End is about 2 miles north-west of Caversham, in Reading. Wherever you are in the RG4 postcode area, our applicators can take on gutter sealing. Kidmore End is one of 34 towns and villages in Reading where we work.

We cover every part of RG4 for gutter sealing. We cover properties on Butlers Orchard, Coopers Pightle and Wood Lane and the roads around them. Other places close to Kidmore End include Sonning Common (1 mile north-east), Peppard Hill (1 mile north), Kingwood Common (2 miles north), Rotherfield Peppard (2 miles north-east) and Shepherd's Green (3 miles north-east). Further out, we also cover Norcot (4 miles south), West Reading (4 miles south), Tilehurst Within (4 miles south-west), Shinfield (7 miles south), Arborfield Garrison (10 miles south-east) and Horncastle (4 miles south).

Near you in Kidmore End

Locally, jobs take us to homes and businesses close to Pack Horse Public House, The Warwick School and Maiden Erlegh Chiltern Edge. The nearest railway station is Tilehurst station, about 2.9 miles south-west. A little further out are Royal Berkshire Regiment Museum (3.4 miles south) and Battle Hospital (3.4 miles south). Open spaces near Kidmore End include Sonning Hill and Hartslock.

Map of Kidmore End © OpenStreetMap contributors

How the job changes by surface

uPVC fascias

We seal fascia joints, not replace the boards. If boards are damaged, we will tell you.

Gutter joints

A dripping joint doesn’t always mean a failed gutter. Resealing is generally enough.

FAQs for Kidmore End

Can you do gutter sealing in Kidmore End?

Yes. We work across London and the South East, and Kidmore End is part of that. You can phone 0345 464 0079 or drop us an email and tell us what needs doing, and we will send you a clear quote.

Do you cover smaller places like Kidmore End?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do you install new fascias or gutters?

Replacement isn’t our trade. We will tell you if the gutter needs replacing so you can call the right trade.

Can new sealant go over the old?

No, it will not last. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.

Do you work for landlords and businesses?

Yes. As well as householders, we work for landlords, agents, businesses and hotels.

Can you seal fascia and soffit joints?

Yes. Our work is the joints and we’ll let you know if a board has failed.

Will sealing fix a sagging gutter?

It will not last. The joint will pull apart so the gutter has to be refixed first.

Do the sealants smell?

Possibly a little. It fades as the sealant cures.

Common problems we fix in Kidmore End

Sagging sections pull joints apart. Sealing won’t hold if the gutter keeps dropping, so the gutter needs refixing first.

If you can see any of these, it’s time to have the joints looked at:

  • Quick sealant fixes on gutters that didn’t last
  • Stop ends leaking at the end of a run
  • Fascia boards with gaps between them
  • Leaking gutter joints and stop ends

Rented homes near Tilehurst station change hands often, and a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.

What your quote should include

  • Which colour the sealant will be
  • What happens if the job turns out different
  • When the joint can take water or movement
  • Who does the work, and how experienced they are

How to choose a mastic man

Why act early in Kidmore End

A new garage door isn’t needed for a leaking frame. Sealing the frame generally stops it, if the frame itself is sound. Where a wall is exposed, as many are in small places like Kidmore End, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.

What you get with us

  • 4.9 on Google from 180+ five-star reviews
  • White, clear, grey or another colour, product permitting
  • 20+ years of sealant experience
  • We never seal over old sealant

Read our cost guide and customer reviews.

Should I try it myself first?

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job