Surrey · England
Hog Hatch Gutter Sealing
Gutter and fascia joints in Hog Hatch need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Drips from gutter joints and end caps
- Old gutter sealant that has let go
- Stop ends leaking at the end of a run
About our gutter sealing in Hog Hatch
Failed sealant round a garage door frame lets rain blow in. We cut out the old sealant and reseal the frame using a sealant made for outdoor use. We work on soffit joints, gutter end caps and uPVC fascias, and common reasons people get in touch are water running down the wall below the gutter and leaking gutter joints and stop ends.
Homes around Hog Hatch range from older cottages to newer houses, with walls and rooflines of every type. Older homes need their gutter and trim joints kept tight, newer ones their movement joints.
Whatever the size of the job, it’s backed by our one-year guarantee in Hog Hatch and across Surrey.
- Where
- Hog Hatch (GU9)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Questions from Hog Hatch
I let a flat near Farnham station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Will you come out to Hog Hatch?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you guarantee gutter sealing?
All our work carries a 12-month guarantee, and we’re fully insured.
Can I choose the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we’re using and why.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Do you do commercial work?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
Leave it or put it right?
You don’t need to replace a garage door because rain gets in round the frame. Resealing the frame joint is often enough. Around Hog Hatch, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why choose Mr Mastic in Hog Hatch
- A sealant colour to suit the surroundings
- We never seal over old sealant
- White, clear, grey or another colour, product permitting
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced or what customers say.
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
A DIY attempt does not rule out a professional job. We cut it out and start again.
When it is not the sealant
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Sagging gutters or broken brackets
- Problems with the roof covering
- Rotten or damaged fascia boards
If you are not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer.
Joints and surfaces we work on
- Gutter joints
- Garage door frames
- Soffit joints
- uPVC fascias
- Gutter end caps
- Roofline trims
Different surfaces, different methods
Gutter joints
Joints between gutter lengths are the most common leak point. They’re cleaned out, dried and resealed.
Soffit joints
Gaps at soffit joints can let in draughts and insects. A neat seal closes them.
Outside joints around Hog Hatch
With historic houses such as Farnham Castle (about 0.9 miles south) nearby, there’s older building stock in the area around Hog Hatch as well as newer homes. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Letting a property close to Farnham station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. Managing a site like Folly Hill Infant School? Then larger buildings have long runs of movement joint that eventually need resealing. Homes close to St Mark the Evangelist Church include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Hog Hatch is about 2 miles north of Farnham, in Surrey. Hog Hatch gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 395 places across Surrey, from the larger towns to small villages. You can also see our page for Reading, about 17 miles away.
Here we cover the GU9 postcode area for gutter sealing. That includes homes and businesses on Coniston Drive, Dukes Walk and Folly Hill and the roads around them. We also cover the places around Hog Hatch: Ewshot (1 mile north-west), Dora's Green (1 mile west), Warren Corner (1 mile west), Dippenhall (2 miles south-west) and Redlands (2 miles west). Larger places within reach include Guildford (10 miles east), Woking (12 miles north-east), Camberley (8 miles north-east), Frimley (7 miles north-east), Haslemere (11 miles south) and Cranleigh (15 miles south-east).
Local landmarks in Hog Hatch
Typical jobs here are in homes near Farnham Heath End School and Weybourne LNR and the streets around them. Hog Hatch’s nearest station is Farnham station, roughly 1.5 miles south-east. Other landmarks nearby include Hart Shopping Centre (3.7 miles north-west) and Museum of Farnham (1.3 miles south). For a walk, there’s Farnham Park and Aunt's Pool.
What we do, step by step
At the end, we look at the finished work together and explain the cure time. The visit itself normally takes an hour or two for a few joints, longer for a full run, depending on the size of the job. For a job in Hog Hatch, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We find where the water is coming from and check the gutter is sound.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Let us know about stairs, lifts or work at height
- Tell us about any previous sealing or DIY attempts
Get a quote
To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before we start.
Advice
For landlords and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
Quotes for gutter sealing in Hog Hatch
There’s no set price list, because jobs vary so much. What we look at:
- The size of the job
- The old material and how stubborn it is
- Any working-time requirements on site
- How many rooms, windows or areas are involved
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll explain what it covers.
What to tell us for a quote
To make quoting easier, let us know:
- The address or postcode of the job
- A few photos by email, if you can
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.