West Sussex · England
Gutter Sealing in Hammerpot
Specialist gutter sealing for Hammerpot: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Fascia boards with gaps between them
- Water running down the wall below the gutter
- Damp on an inside wall under a dripping gutter
Gutter sealing in Hammerpot
It’s easy to live with a dripping gutter joint, but each shower sends water to the same place. Resealing it is a small job if the gutter is otherwise in good order. Common call-outs are for fascia boards with gaps between them and leaking gutter joints and stop ends, on roofline trims, gutter joints and uPVC fascias.
External sealant needs dry, clean surfaces, so work around Hammerpot is planned for dry weather. Tell us about access to all sides of the building, including outbuildings and garages.
Each job carries a 12-month guarantee.
- Where
- Hammerpot (BN16)
- Region
- West Sussex
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Outside joints around Hammerpot
Hammerpot is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. With historic houses such as Ecclesden Manor (about 1.1 miles south-east) nearby, there’s older building stock in the area around Hammerpot as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Rented homes near Angmering station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. If you look after a building such as St Margaret's CofE Primary School, larger buildings have long runs of movement joint that eventually need resealing. Homes close to The Parish Church of St Margaret include some older properties, and older walls, gutters and the joints where extensions meet them need a flexible sealant.
Hammerpot is about 3 miles north-east of Littlehampton, in West Sussex. Jobs in Hammerpot get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Our West Sussex coverage runs to 371 places, Hammerpot among them. We also work in Brighton, about 16 miles from Hammerpot.
Postcode districts we cover here for gutter sealing: BN16. Neighbouring places we cover for gutter sealing include Angmering (1 mile south), Patching (2 miles east), Clapham (2 miles east), Hangleton (2 miles south-east) and West Preston (2 miles south). We also work in nearby towns such as Worthing (4 miles east), Bognor Regis (9 miles west), Chichester (13 miles west), Selsey (15 miles south-west), Littlehampton (3 miles south-west) and Shoreham-by-Sea (9 miles east).
Around Hammerpot
Locally, jobs take us to homes and businesses close to The Fox pub, The Angmering School and Clapham Wood, among other places. For rail, the closest station is Angmering station, about 1.7 miles south of the centre. Well-known places in the area include Rustington Museum (2.3 miles south) and Lyminster Siege Castle (2.4 miles west). The countryside around Hammerpot includes WWT Arundel and Highdown Hill.
Hammerpot: your questions answered
Can you help a landlord with a rental near Angmering station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Do you cover smaller places like Hammerpot?
Yes. Hammerpot is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.
Can you reach high gutters?
Low gutters are simple to reach. For higher work, tell us about access and we’ll confirm what’s needed.
Do you guarantee gutter sealing?
All our work carries a one-year guarantee.
Where are you based?
We work from Crawley. We cover Hammerpot and the rest of West Sussex.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
Also near Hammerpot
More services for Hammerpot
Landlord and commercial work in Hammerpot
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
What we do, step by step
At the end, we look at the finished work together. The work normally takes an hour or two for a few joints, longer for a full run, depending on the size of the job. Somewhere as small as Hammerpot, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at where the water is coming from and check the gutter is not broken or sagging.
- Old sealant and dirt are removed from the joint.
- We make sure the joint is dry before sealing.
- Gutter or exterior sealant is applied and finished.
- We check the run and clear any debris we find while we’re there.
How to prepare
- Tell us about any water getting in
- Let us know about parking restrictions
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
Every job is quoted individually. Simply call 0345 464 0079 or send us an email and describe the job and send photos if you have them.
Read more
What happens if it’s left?
New gutters cost far more than a few resealed joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it has failed, we’ll tell you. Where a wall is exposed, as many are in small places like Hammerpot, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Why us?
- Arbo and Everbuild products
- We’re fully insured
- White, clear, grey or coloured to suit, where the product allows
- You choose the colour before work begins
Take a look at how sealant jobs are priced or what customers say.
What affects the quote in Hammerpot
Your quote is based on your job. We take into account:
- Any mould that needs treating
- The amount of work
- When we can work, for business premises
- Whether the work is at height
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
When you contact us, it’s useful to know:
- Whether it’s a home or a business
- If someone has resealed it before
- Where the job is, and your postcode
- What’s wrong with the joints now
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Deal with a drip before winter
- Make sure downpipes are not blocked
- Clean out the gutters once or twice a year
- Glance at the soffit joints now and then
Check the joints after heavy rain now and then. Drips are easiest to spot while it’s raining.
Leaking gutter joints get worse over time. Water keeps hitting the same part of the wall and that can cause damp inside.
What the job involves on each surface
Gutter joints
A gutter joint has to cope with movement and standing water. A gutter sealant made for the job holds best.
Roofline trims
Trims along the roofline are often finished with sealant. When it splits, water can get behind.