Greater London · England
Gutter Sealing in Custom House
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Custom House, backed by a one-year guarantee. Call for a quick quote.
- Trim joints where the sealant has failed
- Fascia boards with gaps between them
- Water dripping where gutter sections meet
About our gutter sealing in Custom House
We seal leaking gutter joints, end caps, fascia and soffit joints, along with roofline trims and garage door frames. It’s joint work, not replacing the gutter. We work on gutter joints, uPVC fascias and garage door frames, and common reasons people get in touch are internal damp traced to a gutter joint and trim joints where the sealant has failed.
Outside work in London starts with access: side passages, upper floors and where to park. For a home in Custom House, tell us how high the joints are and how to reach the back of the building.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Custom House (E16, E13)
- Wider area
- Greater London
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Gutter sealing in Custom House: local notes
Historic houses like Queen's House (about 2.3 miles south-west) are a reminder that the area around Custom House has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Homes close to St Matthew's Church include some older properties, and older walls, gutters and the joints where extensions meet them need a flexible sealant. As a London address, Custom House can be tricky for parking: let us know about parking bays, permits or a driveway.
Custom House is about 1 mile south of Canning Town, in Greater London. Homes, rented property, offices and hotels in Custom House is covered for gutter sealing, old or new, large or small. The work is guaranteed for a year. Custom House is one of 764 towns and villages in Greater London where we work for gutter sealing.
All of E16 and E13 is within our area for gutter sealing. Whether your property is on Tree Road, Ethel Road and Booth Road or a nearby road, our applicators can take on the job. Being close to the A1020, Custom House is easy for our applicators to reach. We also cover the places around Custom House: West Silvertown (1 mile south-west), Silvertown (1 mile south), Canning Town (1 mile north), Royal Docks (1 mile east) and Limmo Peninsula (1 mile west). Larger places within reach include London (5 miles west), City of Westminster (8 miles west), Marylebone (8 miles west), Kensington (10 miles west), St Pancras (6 miles west) and Shoreditch (5 miles west).
Near you in Custom House
In Custom House, that means homes and buildings near Thames Barrier Park, The Royal Docks Community School and Royal Docks Academy, among other places. There’s a railway station in Custom House itself: Custom House station. Nearby you will also find Gallions Reach Shopping Park (2.2 miles east) and Charlton Athletic Museum (1.5 miles south). The countryside around Custom House includes Gilbert's Pit and Tower Hill.
How it works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours, depending on the number of joints and the access. For a job in Custom House, parking and access are the things to plan: let us know about parking, the floor we will be working on and any lift or shared entrance.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- The sealant is applied and finished.
- The joints are checked once sealed.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
Get a quote
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We will send you a clear quote before any work starts.
Read more
What sealant work can’t fix
In fairness, there are a few things sealant won’t fix:
- Brackets that have snapped or loosened
- Problems with the roof covering
- Downpipes that are blocked or broken
If you’re not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- uPVC fascias
- Gutter joints
- Garage door frames
- Roofline trims
- Soffit joints
- Gutter end caps
Common questions in Custom House
Is Custom House in your area for gutter sealing?
Yes, Custom House is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Can parking be tricky for a visit in Custom House?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. That way the visit can be planned around it.
What about gutters on a second or third storey?
Low-level work is easiest. For anything higher, we will confirm what access is needed once we know more.
Will sealant fix a dripping gutter joint?
Normally, if the gutter is sound. We clean and dry the joint before sealing so the sealant bonds.
Are you insured?
Yes. We’re fully insured.
How long does gutter sealing take?
Typically it takes a few hours, depending on the number of joints and the access. Bigger jobs take longer.
Do you work for letting agents?
Yes, regularly. We can quote for several properties at once, and between tenancies is a good time for the work.
Do you work for hotels and businesses?
Yes. We have worked for hotels, offices and other businesses and we’re fully insured.
Leave it or put it right?
A dripping gutter joint keeps wetting the same patch of wall. Over time that can stain brickwork, mark render and encourage damp so early sealing is worthwhile. In older London homes, water behind a failed joint soaks into brick and timber without much sign, and once it shows in Custom House, the repair is bigger than a sealant job.
Doing several joints on one visit generally makes better use of the time than several visits. We will send you a clear quote for the lot.
Why Custom House customers choose us
- We leave the area clean and tidy
- Quality sealants from Arbo and Everbuild
- 180+ five-star Google reviews
- Approved under the ARBOMaster scheme
Take a look at what affects the cost and what customers say.
Towns and villages near Custom House
Other services in Custom House
What affects the quote in Custom House
For a quick quote, just ask. The main things that affect it are:
- Working hours on commercial sites
- Whether the work is at height
- The type of sealant required
- How much old sealant there is and how hard it is to remove
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- How we’d reach the joints
- The type of property
- Where the property is
- The problem you’ve noticed
Want a quote for gutter sealing? Please phone 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.
For landlords and businesses
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
What we are called out for in Custom House
End caps get knocked or pushed by water. If the seal fails, water escapes at the end and runs down the wall.
The problems people normally mention when they call include:
- Streaks down the brickwork from a leaking joint
- Cracked sealant along roofline trims
- Open joints in fascias and soffits
- Damp on an inside wall under a dripping gutter
Managing a site like St Joachim's Catholic Primary School? Then larger buildings have long runs of movement joint that eventually need resealing.
What to look for in a quote
- Who turns up on the day
- What product goes in the joint
- How the surfaces are prepared before sealing
- Whether you can choose the colour
Different surfaces, different methods
Gutter joints
A dripping joint does not always mean a failed gutter. Sealing the joint often stops it.
uPVC fascias
Fascia board joints can open up. We seal them neatly with a matching sealant where possible.