Hampshire · England
Gutter, fascia & soffit sealing in Chithurst, Hampshire
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Chithurst, backed by a one-year guarantee. Call for a quick quote.
- Dripping gutter ends
- Drips from gutter joints and end caps
- Water running down the wall below the gutter
Gutter sealing in Chithurst, done properly
Garage door frames let rain in when the sealant around them fails. The frame joint is cut out and resealed with an exterior sealant. We’re often asked to deal with earlier gutter repairs that have peeled off and cracked sealant along roofline trims, on roofline trims, gutter end caps and garage door frames.
In a village or hamlet like Chithurst, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
A 12-month guarantee comes as standard.
- Where
- Chithurst (GU31)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Look at the gutters while it’s raining
- Glance at the soffit joints now and then
- Look for streaks or damp on the wall below gutters
- Keep downpipes clear
A sagging gutter needs its brackets checked. Movement will pull the joints open again.
A leaking stop end is best sealed before the wet months. A winter of drips can lead to damp patches inside.
Towns and villages near Chithurst
Other services in Chithurst
What we can’t put right
It helps to know what we cannot do:
- Cracked, split or warped gutter sections
- Brackets that have snapped or loosened
- Rotten or damaged fascia boards
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
Surfaces we seal
- Gutter joints
- Soffit joints
- Gutter end caps
- uPVC fascias
- Roofline trims
- Garage door frames
What the job involves on each surface
Roofline trims
Sealing roofline trims is joint work only. A roofer deals with the roof itself.
uPVC fascias
We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.
How it works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes a few hours, depending on the number of joints and the access, including the tidy-up. For a village or hamlet like Chithurst, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Move anything stored near the joints
- Tell us if parking is tricky
Get a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or send us an email.
Read more
What affects the cost of gutter sealing
Your quote is based on your job. We take into account:
- When we can work, for business premises
- The type of sealant required
- Mould in or behind the old joints
- The number of rooms or windows
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Asking for a quote
Before you ask for a quote, have a think about:
- The type of property
- The problem you’ve noticed
- The address or postcode of the job
- Access, such as stairs, a lift or height
Getting a quote is simple: tell us what needs doing and where. A few pictures by email make the job easier to understand.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Signs you need gutter sealing in Chithurst
A sealant applied to a damp or dirty joint will not bond. Rushed repairs often don’t last long for this reason.
Signs it’s time to call us include:
- Damp patches inside below a leaking gutter
- Cracked sealant along roofline trims
- Water dripping where gutter sections meet
- Stop ends leaking at the end of a run
In the older streets around Chithurst Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Comparing quotes
- What insurance they hold
- Whether all the old sealant comes out first
- Which colour the sealant will be
- How the joint is cleaned and prepared
Chithurst questions
Do you work for landlords with property near Liphook station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.
Is Chithurst in your area for gutter sealing?
Yes, Chithurst is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done.
What about gutters on a second or third storey?
Low gutters are simple to reach. For higher work, tell us about access and we’ll confirm what’s needed.
Do you have insurance?
Yes. We’re fully insured for domestic and commercial work.
Will sealant fix a dripping gutter joint?
In many cases, yes. Cleaning, drying and resealing the joint generally works. A split or warped section needs replacing.
Can sealant stop a sagging gutter leaking?
Not on its own. A sagging gutter pulls its joints apart so it needs refixing before sealing.
Can new sealant go over the old?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
Outside joints around Chithurst
With historic houses such as Cowdray House (about 3.1 miles east) nearby, there’s older building stock in the area around Chithurst as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Rented homes near Liphook station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls. Managing a site like Stedham Primary School? Then larger buildings have long runs of movement joint that eventually need resealing.
Chithurst is about 6 miles east of Petersfield, in Hampshire. Across the GU31 area, we cover gutter sealing for homes and businesses. 683 places in Hampshire are on our list. You can also see our page for Portsmouth, about 18 miles away.
Here we cover the GU31 postcode area for gutter sealing. We also cover Trotton Marsh (1 mile north-west), Borden (1 mile north-west), Rogate (2 miles west), Milland (2 miles north) and Rake (4 miles north-west). Further out, we also cover Havant (13 miles south-west), Horndean (11 miles south-west), Alton (13 miles north-west), Waterlooville (13 miles south-west), Petersfield (6 miles west) and Purbrook (14 miles south-west).
Around Chithurst
Around Chithurst, our work takes us to homes and buildings near The Keeper's Arms Public House and the streets around them. The closest station to Chithurst is Liphook station, roughly 4.9 miles north of the centre. Well-known places in the area include Midhurst Museum (2.9 miles east) and Midhurst Community Hospital (2.9 miles east). Open spaces near Chithurst include Wheeler's Down and Iping and Stedham Commons.