Kent · England
Gutter, fascia & soffit sealing in Broad Oak, Kent
Problem with your gutter and fascia joints in Broad Oak? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Damp on an inside wall under a dripping gutter
- Garage door frames letting rain in
- End caps that drip every time it rains
About our gutter sealing in Broad Oak
For gutter sealant to hold, the joint has to be clean and dry. So the old sealant and grime come out first and the joint is dried before the new sealant goes in. If you are dealing with cracked sealant along roofline trims and damp on an inside wall under a dripping gutter, we can help, on gutter end caps, roofline trims and uPVC fascias alike.
Older homes in small places like Broad Oak may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water normally gets in, and they need the right sealant at the right depth.
Every job is covered by a 12-month guarantee, wherever you are in Kent.
- Where
- Broad Oak (CT2)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
When something else is needed
Before you book, it’s worth knowing the limits too:
- Rotten or damaged fascia boards
- Brackets that have snapped or loosened
- Downpipes that are blocked or broken
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Broad Oak
- uPVC fascias
- Gutter end caps
- Gutter joints
- Garage door frames
- Roofline trims
- Soffit joints
How it works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes anything from an hour or two to a few hours. In a small place like Broad Oak, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We find where the water is coming from and check the gutter is sound.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- A gutter sealant is applied to the joint.
- The gutter is checked and debris around the joints cleared.
How to prepare
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- Let us know about parking restrictions
Getting a quote
We quote each job on its own. Simply phone 0345 464 0079 or send us an email and describe the job, and photos are welcome.
Related advice
Common questions in Broad Oak
Is Broad Oak within the area you cover?
Yes. Broad Oak is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Broad Oak in your area for gutter sealing?
Yes, Broad Oak is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will send you a clear quote.
Can you fit new guttering?
Replacement isn’t our trade. If a gutter is broken or sagging, we will tell you.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
Is gutter cleaning part of the job?
We clear debris around the joints we’re sealing. Full gutter cleaning is a separate job.
Is it OK to seal over old sealant?
No, it will not last. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Is there any odour?
Some sealants have a smell while they cure, but it fades. Ventilation helps.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Surface by surface
Soffit joints
Soffit board joints can separate over time. They’re sealed to tidy the line.
Gutter joints
Most gutter leaks start at a joint between sections. They’re cleaned out, dried and resealed.
Aftercare tips
So the new joints stay in good condition:
- Don’t leave a sagging gutter
- Clean out the gutters once or twice a year
- Check the gutters during heavy rain
- Don’t lean ladders against the gutter itself
If a gutter starts to sag, get the brackets looked at. If it drops, the joints will open.
Rain getting in round a garage door frame can damage what’s stored inside. A reseal sorts it while the frame is sound.
For landlords and businesses
We work for landlords and agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
We also work for property managers and facilities teams. Several sites can be quoted together, and we’re fully insured for the work.
Towns and villages near Broad Oak
More services for Broad Oak
Walls and rooflines in Broad Oak
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Letting a property close to Sturry station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. Managing a site like Sturry Church of England Primary School? Then its movement joints, gutters and trims need looking after like any other building’s. For an older house near a landmark such as St Nicholas' Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Broad Oak is about 2 miles north-east of Canterbury, in Kent. If you need gutter sealing in Broad Oak, please call 0345 464 0079 or drop us an email for a quick quote. We are based in Crawley and cover Kent, Broad Oak included. Across Kent, we cover 922 places, Broad Oak among them. For nearby work, see our Chelmsford page.
Here we cover the CT2 postcode area for gutter sealing. We cover properties on Porty Road, Madeleine Road and Dragon Way. We also cover the places around Broad Oak: Sturry (1 mile east), Calcott (1 mile north), Westbere (2 miles east), Hicks Forstal (2 miles north-east) and Hersden (2 miles east). We also work in nearby towns such as Margate (13 miles north-east), Dover (14 miles south-east), Ramsgate (13 miles east), Broadstairs (14 miles east), Whitstable (5 miles north-west) and Deal (14 miles south-east).
Landmarks near Broad Oak
We work in homes and buildings around Chequer's Wood and Old Park, Spires Academy and Royal Oak Public House and the streets around them. For rail, the closest station is Sturry station, about 0.7 miles south-east. Other landmarks nearby include St Martins Hospital (2.2 miles south) and Whitefriars Shopping Centre (2.6 miles south-west). For a walk, there’s West Blean and Thornden Woods.
Why deal with it now?
Sealant won’t clear a blocked downpipe. We check the cause first and tell you if something else is needed. Around Broad Oak, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
Why us?
- Old sealant always removed completely
- White, clear, grey or another colour, product permitting
- 20+ years of sealant experience
- Quality sealants from Arbo and Everbuild
Read how sealant jobs are priced or our reviews.