Surrey · England
Wyke Glazing Silicone
We cover Wyke for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.
- Mouldy sealant around glass panels
- Water running down inside the glass
- Failed joints on frameless glass
Glazing silicone in Wyke, done properly
Glazing silicone is a maintenance item. Weather and movement take their toll, and once it cracks, water follows. Renewing it keeps glazing joints doing their job. We work on glass-to-glass joints, rooflights and glass-to-frame joints, and common reasons people get in touch are drips on the inside of a conservatory window and rooflight joints letting water in.
Outdoor sealant needs dry, clean surfaces, so work on frames around Wyke is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.
You get a 12-month guarantee, the same in Wyke as everywhere else we work.
- Location
- Wyke (GU12, GU3)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
FAQs for Wyke
Do you cover smaller places like Wyke?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do glazing silicone in Wyke?
Yes, Wyke is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
When is the sealant fully cured?
Cure times vary by product and the conditions. Before we leave, we will tell you the cure time.
Are you fully insured?
Yes. We’re fully insured.
Do you seal glass balustrade bases?
Yes. We cut out the failed sealant and reseal the base joint with a suitable product.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
How much does glazing silicone cost in Wyke?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or send us an email with a short description of the job.
Also in Wyke
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What affects the cost of glazing silicone
The price is agreed before any work begins. It’s based on:
- The type of sealant required
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
Helping us quote
When you contact us, it’s useful to know:
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
- The rough size of the job
For glazing silicone in Wyke, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and you will get a clear quote before work begins.
How the job changes by surface
Glass-to-frame joints
We cut the old silicone from the glass without scratching it and reseal with glazing silicone.
Conservatory frames
Exposed frame joints wear with the weather. Renewed sealant keeps water out.
Frames and glazing around Wyke
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Wanborough Manor (about 2.2 miles south-east) are a reminder that the area around Wyke has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
In the older streets around Church of St Peter, frames set in older brick or stone need a sealant that suits the wall as well as the frame. Rented homes near Ash station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Wyke is about 3 miles east of Aldershot, in Surrey. From the centre of Wyke to the outskirts, glazing silicone is available for homes and businesses alike. We cover 395 towns and villages across Surrey, from the larger towns to small villages. Reading is on our list too, about 18 miles from Wyke.
Postcode districts we cover here for glazing silicone: GU12 and GU3. Streets in the area include Guildford Road, Wyke Lane and Wyke Avenue. We also cover the places around Wyke: Normandy (1 mile east), Flexford (1 mile south-east), Christmas Pie (2 miles south-east), Willey Green (2 miles east) and Wanborough (2 miles south-east). Further out, we also cover Guildford (5 miles east), Woking (7 miles north-east), Camberley (6 miles north), Farnham (5 miles south-west), Egham (14 miles north-east) and Walton-on-Thames (15 miles north-east).
What’s near Wyke
We work in homes and buildings around The Dover Arms and Ash Manor School. For rail, the closest station is Ash station, about 0.6 miles south-west. Nearby you’ll also find Ash Museum (0.8 miles west) and Guildford Hospital (3.9 miles east). Open spaces near Wyke include Ash Ranges and Hog's Back.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Glass that needs replacing
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- Water coming through the roof rather than a sealant joint
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
Where we work in Wyke
- Rooflights
- Glass balustrade bases
- Shower screens
- Glass-to-frame joints
- Glass-to-glass joints
- Conservatory frames
Common problems we fix in Wyke
The wrong sealant is a common cause. Not every silicone sticks properly to glass, and acetoxy types can attack some frame materials.
The problems people normally mention when they call are:
- Water getting into a conservatory at the joints
- Failed joints on frameless glass
- Silicone pulling away from the glass
- A quick top-up bead that didn’t last
For site and facilities teams at buildings such as Wyke Primary School, the mastic around its windows and doors needs looking after like any other building’s.
What to look for in a quote
- How the joint is cleaned and prepared
- Whether all the old sealant comes out first
- What happens if they find a problem under the old sealant
- What guarantee comes with the work
Why act early in Wyke
A leaking joint won’t fix itself. Left, water can mark floors, damage plaster and rot timber so early action saves a bigger repair. Where a wall is exposed, as many are in small places like Wyke, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why choose Mr Mastic in Wyke
- Arbo and Everbuild products
- White, clear, grey or another colour, product permitting
- 4.9 on Google from 180+ five-star reviews
- Colour picked to suit the job
What happens on the day
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from an hour or two to most of a day, depending on the size of the job. For a village or hamlet like Wyke, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we agree the joints to be done.
- We cut away the failed silicone.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Preparing for the visit
- Mention any tricky access
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
Getting a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. Photos by email help us understand the job.