Hampshire · England
Wyck Glazing Silicone
Problem with your glazing joints in Wyck? We remove the old material, prepare the joints and seal them properly.
- Water escaping where a screen meets the wall
- Split or lifting silicone on glass
- A quick top-up bead that didn’t last
Honest limits
Before you book, it’s worth knowing the limits too:
- Frames that have decayed or split
- A sagging or failing conservatory roof
- Cracked or broken glass
If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer before booking.
Surfaces we seal
- Glass balustrade bases
- Shower screens
- Glass-to-frame joints
- Glass-to-glass joints
- Conservatory frames
- Rooflights
Glazing silicone in Wyck
Glazing silicone is a maintenance item. Sun, rain and movement wear it down and cracked joints let water in. Resealing puts that right. We’re often asked to deal with leaks from the base of a shower screen and conservatory leaks at frame and glazing joints, across glass-to-frame joints, glass-to-glass joints and rooflights.
Mastic can only go onto a dry, clean joint, so window work in Wyck is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Wyck (GU34)
- Region
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Also in Wyck
What we do, step by step
We keep the work tidy and contained to the area we are working on. Expect the work to take anything from an hour or two to most of a day, depending on the size of the job. For a village or hamlet like Wyck, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, we trace the leak and check it’s coming through a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- Glazing silicone suited to the joint is applied and tooled.
- The finished joints are checked and, where it’s safe, tested with water.
Getting ready for the visit
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Related advice
Different surfaces, different methods
Glass balustrade bases
We reseal the joint where the glass meets the base channel. We don’t install or replace glass.
Glass-to-glass joints
Where two panes meet, the silicone joint takes all the movement. It must be clean, neat and well bonded.
FAQs for Wyck
Can you help a landlord with a rental near Alton station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Is Wyck within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Are you insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
Can you just put new silicone over the old?
New silicone won’t bond to old silicone and water gets between the layers. We cut out the old sealant first.
Will it make a mess?
No. The area is protected while we work and cleaned up afterwards.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used before we leave.
Do I have to be there?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
Can you reseal a frameless shower screen?
Yes, it’s a common job. We use anti-fungal silicone suited to bathrooms.
Why act early in Wyck
A quick bead over the old sealant might stop a drip for a while, but silicone doesn’t stick to silicone and water soon finds its way back. Cutting out and resealing properly lasts. Around Wyck, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
What you pay reflects the work, not guesswork. That is why we ask a few questions first.
Why book with us
- An ARBOMaster approved applicator
- Arbo and Everbuild products
- Colour agreed with you before any work starts
- A sealant colour to suit the surroundings
Read what affects the cost and our reviews.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What we are called out for in Wyck
Heat and cold make glass and frames move at different rates. Over years, that movement tears the silicone.
Look out for any of the following:
- Cracked silicone between glass panels
- Leaking glazing joints on a rooflight
- Glazing silicone that has cracked or come away
- Water escaping where a screen meets the wall
If you live in an older home near Church of St Mary, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
What your quote should include
- Whether you can choose the colour
- Is the old sealant removed completely?
- What happens if the job turns out different
- What preparation is included
Glazing silicone in Wyck: local notes
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Letting a property close to Alton station? Then glazing joints are worth checking at the end of a tenancy, before a small leak grows. Schools such as Binsted Church of England Primary School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s.
Wyck is about 3 miles east of Alton, in Hampshire. Every kind of property in Wyck is covered for glazing silicone. Every job comes with our 12-month guarantee. Our area takes in 683 places across Hampshire. There’s also a page for Reading, roughly 21 miles from Wyck.
Jobs for glazing silicone in GU34 works the same way as everywhere else we cover. If you are just outside Wyck, we cover East Worldham (1 mile south-west), Neatham (1 mile north-west), Holybourne (2 miles north-west), Upper Froyle (2 miles north) and Hartley Mauditt (2 miles south-west). Further out, we also cover Basingstoke (11 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north), Aldershot (10 miles north-east), Alton (3 miles west) and Petersfield (10 miles south).
Local landmarks in Wyck
In Wyck, that means homes and buildings near Eggar's School. The nearest railway station is Alton station, roughly 2.2 miles west. A little further out are Alton Community Hospital (3.2 miles west) and Barley Pound (5 miles north-east). Open spaces near Wyck include Deadwater Valley and Holybourne Hill.
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Wyck and across Hampshire. Several sites can go on one quote, and we are fully insured for the work.
If you manage several properties in or around Wyck, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.