Hampshire · England
Glazing Silicone in Upper Enham
Glazing joints in Upper Enham need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Water escaping where a screen meets the wall
- Leaking glazing joints on a rooflight
- Cracked silicone between glass panels
How we handle glazing silicone in Upper Enham
Cracked, stained or lifting silicone on glass spoils the look and lets water in. It comes off cleanly, without marking the glass before the new bead goes in. We work on rooflights, glass-to-glass joints and glass balustrade bases, and the jobs we see most are leaking glazing joints on a rooflight and drips on the inside of a conservatory window.
Mastic can only go onto a dry, clean joint, so window work in Upper Enham is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.
Big or small, you get the same 12-month guarantee.
- Location
- Upper Enham (SP11)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the quote in Upper Enham
Some jobs are bigger than they look, and some smaller. The main factors:
- The product the joint needs
- Any working-time requirements on site
- The amount of work
- Any mould that needs treating
Doing several joints on one visit is generally more efficient than separate visits. We will give you a clear price for the lot.
Helping us quote
When you call or email, it’s useful to know:
- What the problem is, such as mould, gaps, leaks or cracking
- If someone has resealed it before
- Roughly how big the job is
- Where the property is
For glazing silicone in Upper Enham, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Do you need glazing silicone in Upper Enham?
Sealant laid over old sealant doesn’t last. Plenty of leaks come from a quick top-up over the old bead leaving a path for water.
Most people get in touch after spotting something like this:
- Leaking glazing joints on a rooflight
- Glazing silicone that has cracked or come away
- Water tracking down the inner face of the glass
- A quick top-up bead that didn’t last
Letting a property close to Andover station? Then glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Comparing quotes
- How long to leave it before use
- What happens if they find a problem under the old sealant
- Whether VAT is included
- How the surfaces are prepared before sealing
Leave it or put it right?
Silicone around glazing needs the right product. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. In a small place like Upper Enham, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Why book with us
- We agree the colour with you first
- Neat joints and a tidy finish
- Experience in homes, commercial sites and hotels
- Sanitary silicone with an anti-fungal additive in wet areas
Take a look at what affects the cost or what customers say.
Upper Enham homes and the weather
The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Homes close to Saint George include some older properties, and the joint between an old wall and a newer frame is normally the first place rain gets in. If you look after a building such as Smannell and Enham Church of England (Aided) Primary School, its window and door frames need their mastic kept sound, just like a home’s.
Upper Enham is about 3 miles north of Andover, in Hampshire. From the centre of Upper Enham to the outskirts, we cover glazing silicone for every kind of property, from flats and houses to offices and hotels. Upper Enham is one of 683 places in Hampshire we cover. Our Southampton page covers work nearby.
All of SP11 is within our area for glazing silicone. If you need glazing silicone at a property on Dunhills Lane, Maccallum Road and Green Drove or anywhere close by, our applicators can take on the job. Other places close to Upper Enham include Enham Alamein (1 mile south), Little London (1 mile east), Smannell (1 mile south-east), Wildhern (1 mile north-west) and Knights Enham (1 mile south). We also work in nearby towns such as Winchester (15 miles south-east), Andover (3 miles south), Hyde (14 miles south-east), Tidworth (8 miles west), Weeke (14 miles south-east) and Kempshott (14 miles east).
Near you in Upper Enham
We work in homes and buildings around The Hare & Hounds pub and the streets around them. Upper Enham’s nearest station is Andover station, about 2.8 miles south of the centre. Other landmarks nearby include Finkley Down Farm Museum (2.1 miles south) and Andover War Memorial Hospital (2.6 miles south-west). Open spaces near Upper Enham include Anton Lakes and Mill Lake.
Also near Upper Enham
Also in Upper Enham
What we can’t put right
To be straight with you, some problems need a different trade:
- A sealed unit that has misted inside
- A sagging or failing conservatory roof
- Cracked or broken glass
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
Where we work in Upper Enham
- Conservatory frames
- Glass balustrade bases
- Glass-to-glass joints
- Shower screens
- Rooflights
- Glass-to-frame joints
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Keep air moving in the conservatory
- Avoid strong solvents on or near the sealant
- Inspect the sealant on glazing annually
- Squeegee the shower screen after each use
Follow the cure time we give you before the joints get wet. After that, clean glass with a mild cleaner.
Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part, and we’ll tell you which.
What the job involves on each surface
Glass balustrade bases
Balustrade bases are exposed outdoors. A sound sealant joint keeps them tidy and dry.
Glass-to-frame joints
Where glass sits in a frame, silicone keeps water out. When it splits, water can get into the frame.
Upper Enham: your questions answered
Do you work for landlords with property near Andover station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Can you do glazing silicone in Upper Enham?
Yes. Our work covers London and the South East, and Upper Enham is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can you just put new silicone over the old?
A top-up rarely holds. The new bead can’t grip the old one, so we remove the old sealant and clean the joint.
Is it possible to redo the silicone on a shower screen?
Yes. The old bead comes off without marking the glass before cleaning and resealing.
Is the work guaranteed?
Every job comes with our one-year guarantee.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that generally means someone at home.
Is a special sealant needed for glass?
A glazing silicone chosen for the joint. Neutral-cure products suit most glass and frames, as some acetoxy types can attack certain metals.
What happens on the day
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it generally takes a few hours for most jobs. In a small place like Upper Enham, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- The joint is cleaned and degreased.
- We lay the new bead and tool it smooth.
- Each joint is checked and, where possible, water-tested.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
- Let us know about stairs, lifts or work at height
Get a quote
Need a quote? Please phone 0345 464 0079 or send us an email with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.