Kent · England
The Moor Glazing Silicone
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homes and businesses in The Moor and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Leaks from the base of a shower screen
- Mouldy sealant around glass panels
- Water running down inside the glass
Glazing silicone in The Moor
Many conservatory leaks come down to failed sealant, where glass meets frame or frame meets wall. We trace the leak to the joint and reseal it and tell you plainly if the cause is something else. If you are dealing with leaks from the base of a shower screen and stained, discoloured glazing silicone, we can put it right.
Homes in small places like The Moor often stand in the open, with little to shelter their windows from wind and rain. Exposed frames and sills lose their mastic sooner than sheltered ones.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Location
- The Moor (TN18)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Glass balustrade bases
Glass balustrades sit in a channel that is often finished with sealant. Failed sealant there lets water collect.
Glass-to-frame joints
The sealant must stick to glass and frame alike. We choose a product that suits both.
What glazing silicone looks like in The Moor
Historic houses like Great Dixter (about 4.8 miles south-east) are a reminder that the area around The Moor has older buildings as well as new. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Schools such as Marlborough House School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s. Homes close to Church of St Laurence include some older properties, and frames set in older brick or stone need a sealant that suits the wall as well as the frame.
The Moor is about 12 miles north of Hastings, in Kent. For glazing silicone in and around The Moor, please ring 0345 464 0079 or drop us an email for a quick quote. We are based in Crawley and cover Kent, The Moor included. The Moor is one of 922 towns and villages in Kent we cover. For nearby work, see our Crawley page (30 miles or so).
Work in TN18 is quoted and booked the same way as anywhere else. If you need glazing silicone at a property on The Moor, Pipers Lane and The Chestnuts or anywhere close by, our applicators can take on the job. If you are just outside The Moor, we cover Hawkhurst (1 mile north-east), Little Conghurst (1 mile east), Pipsden (1 mile north-east), Four Throws (1 mile east) and Beal's Green (1 mile north). Larger places within reach include Royal Tunbridge Wells (12 miles north-west), Tonbridge (15 miles north-west), Paddock Wood (11 miles north-west), Tenterden (8 miles east), Southborough (13 miles north-west) and Park Wood (14 miles north).
Around The Moor
In The Moor, that means homes and buildings near Collingwood Nature Reserve, The Eight Bells Hotel and Hawkhurst Church of England Primary School, among other places. The closest station to The Moor is Etchingham station, roughly 3.3 miles south-west. Other landmarks nearby include Ticehurst House Hospital (4.6 miles west).
Why deal with it now?
You do not need new glazing because the sealant has gone. If the glass and frame are sound, new silicone is often all it takes, and we’ll tell you if that’s not the case. In a small place like The Moor, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before we start.
Why book with us
- We are fully insured
- Anti-fungal sanitary silicone in wet areas
- Experience in homes, commercial sites and hotels
- 4.9 on Google from 180+ five-star reviews
See our cost guide or what customers say.
What sealant work can’t fix
Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:
- Rotten or badly damaged frames
- A roof that has moved or dropped
- A broken pane or roof panel
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
What we seal
- Conservatory frames
- Shower screens
- Glass-to-frame joints
- Rooflights
- Glass balustrade bases
- Glass-to-glass joints
Common questions in The Moor
Can you help a landlord with a rental near Etchingham station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Can you do glazing silicone in The Moor?
Yes. We work across London and the South East, and The Moor is part of that. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
How long does glazing silicone take?
That depends on the amount of work, but as a guide it takes a few hours for most jobs. We’ll tell you when we quote.
Can you fix a leaking conservatory?
If the water is coming in through failed sealant joints, yes. If the cause is the roof, a panel or a unit, we’ll say so.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Can you reseal a frameless shower screen?
Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Which silicone is used for glass joints?
A glazing silicone chosen for the joint. Neutral-cure products suit most glass and frames.
Nearby places to The Moor
What else we do in The Moor
Common problems we fix in The Moor
Some conservatory leaks aren’t sealant at all: failed roof panels, slipped glazing bars and blocked gutters cause them too. That is why we trace the leak first.
Keep an eye out for these signs:
- Sealant that was laid over old silicone and failed
- Leaking glazing joints on a rooflight
- Glazing silicone that has cracked or come away
- Shower screens leaking along the wall or tray
For landlords with property near Etchingham station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.
What to look for in a quote
- Who does the work, and how experienced they are
- How hidden problems are handled
- What the cure time is
- What the quote includes, VAT included or not
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on how many joints need doing. Somewhere as small as The Moor, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We find where water is getting in and check whether it’s a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- Glazing silicone suited to the joint is applied and tooled.
- We check the joints and, where safe, run water over them.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Let us know about parking restrictions
- Move anything stored near the joints
Getting a quote
For a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Related advice
Should I try it myself first?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.