Aberdeenshire · Scotland
St Combs Glazing Silicone
Glazing silicone for conservatories, rooflights, glass panels and shower screens in St Combs, with a one-year guarantee on every job. Ask us for a quote.
- Water running down inside the glass
- Cracked silicone between glass panels
- Shower screens leaking along the wall or tray
What glazing silicone looks like in St Combs
St Combs is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.
In and around St Combs, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint. Homes close to St Combs include some older properties, and the joint between an old wall and a newer frame is generally the first place rain gets in.
St Combs is about 4 miles south-east of Fraserburgh, in Aberdeenshire. Every kind of property in St Combs is covered for glazing silicone. Every job comes with our one-year guarantee. Across Aberdeenshire, we cover 161 places, St Combs among them. Aberdeen is on our list too, around 36 miles away.
Postcode districts we cover here for glazing silicone: AB43. Glazing silicone is available to properties on High Street, West Street and Charles Street. If you are just outside St Combs, we cover Inverallochy (1 mile north-west), Crimond (4 miles south), Fraserburgh (4 miles north-west), Keyhead (5 miles south) and Broadsea (5 miles north-west). We also work in nearby towns such as Peterhead (11 miles south), Roanheads (11 miles south-east), Clerkhill (12 miles south), Port Henry (12 miles south-east), Mintlaw (10 miles south) and Boddam (14 miles south).
Local landmarks in St Combs
A little further out are Inverallochy Castle (0.8 miles west) and Fraserburgh Hospital (4.5 miles north-west). For a walk, there’s Loch of Strathbeg.
About our glazing silicone in St Combs
Conservatory leaks often start at a sealant joint at the glass-to-frame or frame-to-wall joints. We find the joint that’s letting water in and renew it and tell you plainly if the cause is something else. We work on glass-to-frame joints, shower screens and glass balustrade bases, and people most often call us about mouldy sealant around glass panels and water escaping where a screen meets the wall.
Older stone-built homes in Scotland often have sash and case or timber windows set in stone. The sealant has to suit the stone, which rules out acetoxy silicones that can mark or attack it.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- St Combs (AB43)
- Region
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Places near St Combs
What else we do in St Combs
Your questions about glazing silicone in St Combs
Will you come out to St Combs?
Yes. St Combs is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Does the coastal weather in St Combs affect outside sealant?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
How long does glazing silicone take?
Most jobs take a few hours, depending on how many joints need doing, including preparation and clearing up. We will confirm how long when we quote.
How much does glazing silicone cost in St Combs?
Size, access and the old material all affect the cost. Ask us for a quote.
Can I do it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you work for hotels and businesses?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Can you just put new silicone over the old?
Silicone does not stick to silicone, so a top-up soon lets water through. The old bead always comes out first.
What happens if it’s left?
Leaks get worse, not better. Left, water can mark floors, damage plaster and rot timber so early action saves a bigger repair. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
What you get with us
- Colour agreed with you before any work starts
- Homes, businesses and hotels
- We leave the area clean and tidy
- A choice of colours where the product allows
Read what affects the cost or customer reviews.
What affects the cost of glazing silicone
Your quote is based on your job. We look at:
- When we can work, for business premises
- Any mould that needs treating
- Access and height
- The number and length of the joints
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
What to tell us for a quote
To help us quote quickly, let us know:
- Whether it has been sealed before
- Any access issues, like height or stairs
- Where the property is
- A few pictures by email, if you can
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, send an email to info@mrmastic.co.uk.
What sealant work can’t fix
New sealant can’t fix everything, and we will tell you before any work starts. It will not solve:
- A sagging or failing conservatory roof
- A frame that needs repairing or replacing
- Water coming through the roof rather than a sealant joint
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Joints and surfaces we work on
- Shower screens
- Glass-to-glass joints
- Glass balustrade bases
- Rooflights
- Glass-to-frame joints
- Conservatory frames
For landlords and businesses
For anyone letting property in or around St Combs, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
How it works
We bring everything the job needs with us, so there’s nothing for you to buy. Once we’ve agreed what’s being done, we protect the area and start. Most jobs take a few hours, depending on how many joints need doing. Somewhere like St Combs may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We start by finding the leak and making sure sealant is the cause.
- The old sealant is removed from the glass and frame without scratching them.
- The glass and frame are cleaned and degreased.
- We apply a neutral-cure glazing silicone and tool it smooth.
- The finished joints are checked and, where it’s safe, tested with water.
Getting ready for the visit
- Mention if the joints have been sealed before
- Mention any leaks or damp you’ve noticed
- For business premises, tell us about site rules or sign-in
How to get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, email us at info@mrmastic.co.uk.
Advice
Looking after it afterwards
To keep the joints looking good and working properly:
- Act on drips or damp patches early
- Keep scrapers and blades away from the silicone
- Keep conservatory gutters clear of leaves
- Stick to mild cleaners on glass
Keep the new joints dry for as long as we advise. After that, clean glass with a mild cleaner.
Conservatory leaks rarely stay small. Water runs along frames and down walls, so get it looked at when you first see it.