Aberdeenshire · Scotland

Fraserburgh Glazing Silicone

Glazing silicone for conservatories, rooflights, glass panels and shower screens for householders, landlords and businesses in Fraserburgh. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Glass-to-glass joints that have split
  • Water getting into a conservatory at the joints
  • Leaks from the base of a shower screen

Glazing silicone near Fraserburgh

Landlord and commercial work in Fraserburgh

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.

Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured for the work.

Glazing silicone for homes and businesses in Fraserburgh

Across Fraserburgh, we reseal glazing joints in homes, offices and hotels. From conservatories to shower screens, it’s the same careful method, with a sealant chosen for the joint. If you’re dealing with leaking glazing joints on a rooflight and water running down inside the glass, we can help, on conservatory frames, shower screens and rooflights alike.

Scottish weather is hard on window mastic, and a town like Fraserburgh gets its share of wind and rain. The windows facing the weather are usually the first to leak.

The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.

Location
Fraserburgh (AB43)
Wider area
Aberdeenshire
Cover
A year, on every job
Quotes
A clear price before we start
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

How the visit works

We keep the work tidy and contained to the area we are working on, so you can get on with your day. The job usually takes a few hours for most jobs, and we explain the cure time before we leave. For a job in Fraserburgh, tell us where the work is, how to get in and where to park. Outside work depends on the weather, as sealant needs a dry surface.

  1. We find where water is getting in and check whether it’s a sealant joint.
  2. We cut out the failed silicone, taking care of the glass and frame.
  3. Surfaces are cleaned with a solvent suited to glass and the frame.
  4. Glazing silicone suited to the joint is applied and tooled.
  5. We check the joints and, where safe, run water over them.

Getting ready for the visit

  • Try not to wet indoor joints just before the visit
  • Clear the area around the work
  • Tell us about any water getting in

Get a quote

There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.

Ask for a quote

Read more

Quotes for glazing silicone in Fraserburgh

We quote each job individually. These are the things that affect it:

  • Mould in or behind the old joints
  • How many rooms, windows or areas are involved
  • The type of sealant required
  • Whether the work is at height

A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.

Asking for a quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Pictures of the joints, sent by email
  • Whether it has been sealed before
  • The address or postcode of the job
  • Any access issues, like height or stairs

Need a quote? Please email us at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear price before we start.

Should I try it myself first?

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.

Why it’s worth doing now in Fraserburgh

Dealing with a leaking shower screen early protects the floor and ceiling. Water from a failed joint can soak into the floor before you notice. Private landlords in a town like Fraserburgh must keep homes wind and watertight under the Repairing Standard. Replacing failed sealant early is simpler than dealing with a complaint.

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

Why us?

  • A sealant colour to suit the surroundings
  • Over 20 years’ experience
  • Anti-fungal sanitary silicone in wet areas
  • Experience in homes, commercial sites and hotels

Take a look at our cost guide or customer reviews.

Frames and glazing around Fraserburgh

Fraserburgh is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on glazing joints and frame seals, especially on the side facing the sea. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.

In and around Fraserburgh, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint.

Fraserburgh is about 37 miles north of Aberdeen, in Aberdeenshire. If you need glazing silicone in Fraserburgh, please email us at info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Aberdeenshire, Fraserburgh included. Our Aberdeenshire coverage runs to 161 places, Fraserburgh among them. For nearby work, see our Aberdeen page (37 miles or so).

Every address in AB43 is within our area for glazing silicone. Local streets include High Street, Main Street and Thompson Terrace. Being close to the A90 and A98, Fraserburgh is simple for us to get to. Other places close to Fraserburgh include Broadsea (1 mile north), Sandhaven (2 miles north-west), Pittulie (2 miles north-west), Memsie (3 miles south-west) and Inverallochy (3 miles east). Larger places within reach include Peterhead (15 miles south-east), Roanheads (15 miles south-east), Clerkhill (15 miles south-east), Port Henry (15 miles south-east), Mintlaw (11 miles south) and Longside (12 miles south). Being one of Aberdeenshire’s larger places, Fraserburgh has homes, rented property and businesses of every kind.

Near you in Fraserburgh

In Fraserburgh, that means homes and buildings near The Saltoun Inn, among other places. Nearby you will also find Fraserburgh Hospital (less than half a mile north) and Fraserburgh Heritage Centre (0.9 miles north-east).

Map of Fraserburgh © OpenStreetMap contributors

Fraserburgh: your questions answered

Does living near the coast affect glazing silicone in Fraserburgh?

Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.

What guarantee comes with glazing silicone in Fraserburgh?

Every job comes with our 12-month guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.

Can you match the sealant colour?

Usually, yes. White, clear and grey are common, and other colours are available, and we will agree it with you first.

How long does glazing silicone take?

That depends on how much there is to do, but most jobs take a few hours for most jobs. We’ll give you a better idea when we quote.

Will the old sealant be removed?

Yes. All of the old material is cut out and the joint cleaned before resealing.

What should I tell you?

Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply send an email to info@mrmastic.co.uk.

Do you work for landlords and businesses?

Yes, we do. We work in homes, commercial premises and hotels.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Signs you need glazing silicone in Fraserburgh

Sunlight breaks sealant down and roof joints get the most sun. It goes brittle, cracks and stops sticking on the glass.

If you can see any of these, it’s time to have the joints looked at:

  • Leaks where conservatory glass meets the frame
  • New silicone smeared over old sealant
  • Shower screens leaking along the wall or tray
  • Water tracking down the inner face of the glass

Schools such as Fraserburgh Academy are buildings too, and the mastic around its windows and doors needs looking after like any other building’s.

Before you book anyone

  • Which colour the sealant will be
  • What guarantee comes with the work
  • How the joint is cleaned and prepared
  • Whether they seal over old material or remove it

Choosing a sealant specialist

What sealant work can’t fix

New sealant can’t fix everything, and we’d rather say so up front. It will not solve:

  • Structural problems with a conservatory roof
  • Water coming through the roof rather than a sealant joint
  • A sealed unit that has misted inside

Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly.

Joints and surfaces we work on

  • Glass balustrade bases
  • Rooflights
  • Glass-to-glass joints
  • Conservatory frames
  • Glass-to-frame joints
  • Shower screens
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job