Hampshire · England
Glazing Silicone in Southwood
Glazing silicone for conservatories, rooflights, glass panels and shower screens for Southwood, backed by a one-year guarantee. Ask us for a quote.
- Water running down inside the glass
- Failed sealant around rooflight glass
- Leaks where conservatory glass meets the frame
About our glazing silicone in Southwood
Glazing silicone that has yellowed, blackened or come away spoils the look and lets water in. We remove it without scratching the glass or frame before the new bead goes in. Common call-outs are for leaks where conservatory glass meets the frame and leaking glazing joints on a rooflight, across conservatory frames, glass-to-glass joints and rooflights.
Houses in smaller places like Southwood can stand more in the open than those in a built-up town. That’s hard on the mastic around frames and sills.
Your job is guaranteed for a year, as with all our work.
- Where
- Southwood (GU14, GU51)
- Region
- Hampshire
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
When to call us in Southwood
Dirt and grease stop silicone sticking. If the glass and frame weren’t cleaned properly the sealant may lift within a few years.
Keep an eye out for any of the following:
- Shower screens leaking along the wall or tray
- Drips on the inside of a conservatory window
- A quick top-up bead that didn’t last
- Water getting into a conservatory at the joints
If you look after a building such as Southwood Infant School, the mastic around its windows and doors needs looking after like any other building’s.
Questions to ask before booking
- What product goes in the joint
- How long to leave it before use
- How long the guarantee is
- Whether they seal over old material or remove it
What happens if it’s left?
Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. In a smaller place like Southwood, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
The cost depends on the size of the job, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.
What you get with us
- 4.9 on Google from 180+ five-star reviews
- White, clear, grey or another colour, product permitting
- Neat joints and a tidy finish
- We never seal over old sealant
Read what affects the cost or what customers say.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Structural problems with a conservatory roof
- Glass that needs replacing
- Rotten or badly damaged frames
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
What we seal
- Glass-to-frame joints
- Rooflights
- Glass-to-glass joints
- Conservatory frames
- Shower screens
- Glass balustrade bases
FAQs for Southwood
Will you come out to Southwood?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is Southwood in your area for glazing silicone?
Yes, Southwood is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Is it possible to redo the silicone on a shower screen?
Yes, it’s a common job. The screen is resealed with anti-fungal silicone suited to bathrooms.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used before we leave.
Windows and doors in Southwood
Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Homes close to St John the Baptist include some older properties, and frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you let a flat or house near Fleet station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Southwood is about 1 mile west of Farnborough, in Hampshire. Southwood gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Southwood is one of 683 towns and villages in Hampshire we cover. For nearby work, see our Reading page.
Jobs for glazing silicone in GU14 and GU51 works the same way as everywhere else we cover. Whether your property is on Fleet Road, Kennels Lane and Summit Avenue or anywhere close by, our applicators can take on the job. We also cover the places around Southwood: Cove (1 mile north), Farnborough (1 mile east), North Camp (2 miles east), Mytchett (3 miles east) and Aldershot (3 miles south-east). We also work in nearby towns such as Basingstoke (13 miles west), Alton (12 miles south-west), Yateley (4 miles north-west), Bordon (13 miles south), Hook (7 miles west) and Popley (12 miles west).
What’s near Southwood
Locally, jobs take us to homes and businesses close to National Aerospace Library, Ancells Farm Park and Cove School. The nearest railway station is Fleet station, roughly 1.5 miles west of the centre. Well-known places in the area include Hart Shopping Centre (2.1 miles west) and Royal Army Dental Corps Historical Museum (2.6 miles south-east). The countryside around Southwood includes Aunt's Pool and Ball Hill.
For landlords and businesses
If you manage several properties in or around Southwood, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Nearby places to Southwood
More services for Southwood
How the visit works
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for most jobs. A visit to Southwood is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We find where water is getting in and check whether it’s a sealant joint.
- The old sealant is removed from the glass and frame without scratching them.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- Glazing silicone suited to the joint is applied and tooled.
- We look over every joint and, where we can, test it with water.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention any tricky access
- Let us know about parking restrictions
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and send you a clear quote.
Related advice
Quotes for glazing silicone in Southwood
The price is agreed before any work begins. It takes into account:
- Mould in or behind the old joints
- Whether the work is at height
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
Before you ask for a quote, have a think about:
- How we’d reach the joints
- The type of property
- The rough size of the job
- What’s wrong with the joints now
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.