Surrey · England

Pirbright Glazing Silicone

We cover Pirbright for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.

  • Leaks from the base of a shower screen
  • Leaks where conservatory glass meets the frame
  • Glass-to-glass joints that have split

Glazing silicone near Pirbright

Glazing silicone for homes and businesses in Pirbright

Our work covers conservatory joints, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. The old sealant comes out, the joint is cleaned and new silicone goes in. Typical jobs include failed sealant around rooflight glass and sealant that was laid over old silicone and failed, on glass balustrade bases, glass-to-glass joints and rooflights.

Mastic can only go onto a dry, clean joint, so window work in Pirbright is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.

The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.

Location
Pirbright (GU24)
Region
Surrey
Cover
A year, on every job
Quote
Quoted before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

Work for landlords, hotels and businesses

Letting agents often deal with us directly. Tell us the address, the job and how access works.

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.

Looking after it afterwards

Looking after new joints is easy, and it makes a real difference:

  • Keep air moving in the conservatory
  • Wipe the screen down after showering
  • Keep scrapers and blades away from the silicone
  • Clean glass with a mild cleaner and a soft cloth

Squeegee a shower screen after each shower and keep the room ventilated. That slows mould growth on the bead.

Cracked glazing silicone means the joint has failed. Renewing it early keeps it simple compared with fixing water damage later.

Can I do it myself?

The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

What happens on the day

There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes a few hours for most jobs for a typical job. Somewhere like Pirbright needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We look at the glazing and agree which joints need resealing.
  2. We cut away the failed silicone.
  3. We clean and prepare the joint.
  4. We apply and tool the new silicone.
  5. We inspect the work and test it where we can.

Before we arrive

  • Tell us if parking is tricky
  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention if the joints have been sealed before

How to get a quote

We quote each job on its own. Just ring 0345 464 0079 or email us with the details.

Get a price

Related advice

When to call us in Pirbright

Not every leak is a sealant problem: failed roof panels, slipped glazing bars and blocked gutters cause them too. We find the cause before we seal anything.

The most common problems we see are:

  • A quick top-up bead that didn’t last
  • Mouldy sealant around glass panels
  • Failed sealant around rooflight glass
  • Shower screens leaking along the wall or tray

In the older streets around Church of St Michael and All Angels, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.

Before you book anyone

  • How much experience the applicator has
  • What the cure time is
  • What happens if the job turns out different
  • The length of the guarantee

10 questions to ask before you book

Why act early in Pirbright

Replacing a conservatory roof is major work. If the leak is a failed sealant joint, resealing is far simpler. If the roof is the problem, we’ll say so. In a small place like Pirbright, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.

Why book with us

  • ARBOMaster approved applicator
  • A 12-month guarantee on all work
  • Any old sealant cut out fully, not covered over
  • Neat joints and a tidy finish

Take a look at our cost guide or customer reviews.

Glazing silicone in Pirbright: local notes

Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Wanborough Manor (about 4.4 miles south) are a reminder that the area around Pirbright has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.

Letting a property close to Brookwood station? Then glazing joints are worth checking at the end of a tenancy, before a small leak grows. Managing a site like Knowl Hill School? Then larger buildings have plenty of frames, and the mastic around each one ages.

Pirbright is about 3 miles south-west of Woking, in Surrey. From the centre of Pirbright to the outskirts, glazing silicone is available for homes and businesses alike. We cover 395 towns and villages across Surrey, from the larger towns to small villages. You can also see our page for Reading, roughly 18 miles from Pirbright.

All of GU24 is covered for glazing silicone. Whether your property is on Cowbridge Meadow, Gibb's Acre and Church Lane or anywhere close by, we can help. Main roads around Pirbright include the A324. If you’re just outside Pirbright, we cover Stanford Common (1 mile south), Worplesdon (2 miles south-east), Willey Green (3 miles south), Fairlands (3 miles south-east) and Normandy (3 miles south). Larger places within reach include Guildford (5 miles south-east), Woking (3 miles north-east), Camberley (5 miles north-west), Farnham (9 miles south-west), Egham (10 miles north-east) and Walton-on-Thames (12 miles north-east).

Local landmarks in Pirbright

Around Pirbright, our work takes us to homes and buildings near White Hart pub, Pirbright Village Primary School and The Winston Churchill School A Specialist Sports College and the streets around them. The nearest railway station is Brookwood station, about 0.8 miles north-east. Nearby you will also find The Museum of The National Rifle Association (1.3 miles north) and Brookwood Hospital (1.9 miles north-east). Green spaces nearby include Brookwood Lye.

Map of Pirbright © OpenStreetMap contributors

Questions from Pirbright

Is Pirbright within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Is Pirbright in your area for glazing silicone?

Yes. Our work covers London and the South East, and Pirbright is part of that. You can call 0345 464 0079 or email us and let us know what needs doing, and we will give you a clear price.

Can I do it myself?

It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.

Do you reseal glass shower screens?

We can. The old bead comes off without marking the glass, and the joints are cleaned and resealed.

Does someone need to be in?

It depends on the job. Inside work needs someone to give us access.

Can you just put new silicone over the old?

New silicone won’t bond to old silicone, so a top-up soon lets water through. The old bead always comes out first.

When is the sealant fully cured?

It depends on the product and the temperature. Before we leave, we will tell you the cure time.

Will the old sealant be removed?

Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.

Honest limits

Some problems need a builder, plumber or other trade rather than us:

  • A sealed unit that has misted inside
  • Leaks from the roof covering or flashing (a roofer’s job)
  • A sagging or failing conservatory roof

If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before you book.

Joints and surfaces we work on

  • Shower screens
  • Conservatory frames
  • Glass-to-frame joints
  • Rooflights
  • Glass-to-glass joints
  • Glass balustrade bases
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job