Essex · England

Glazing Silicone in Pilgrims Hatch

Glazing silicone for conservatories, rooflights, glass panels and shower screens for Pilgrims Hatch, backed by a one-year guarantee. Ask us for a quote.

  • Leaks from the base of a shower screen
  • Water running down inside the glass
  • Failed sealant around rooflight glass

Book glazing silicone in Pilgrims Hatch

Landlord and commercial work in Pilgrims Hatch

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.

How we handle glazing silicone in Pilgrims Hatch

Cracked, stained or lifting silicone on glass looks poor and can leak. We remove it without scratching the glass or frame and reseal the joint. We work on glass-to-glass joints, shower screens and glass balustrade bases, and the jobs we see most are conservatory leaks at frame and glazing joints and cracked silicone between glass panels.

Houses in smaller places like Pilgrims Hatch can stand more in the open than those in a built-up town, so exposed windows and doors face the weather head on. That’s hard on the mastic around frames and sills.

A one-year guarantee comes as standard, so you are covered after we have gone.

Applicator reaching up to seal an external door frame on a sunny day
Where
Pilgrims Hatch (CM15, CM14)
Wider area
Essex
Guarantee
One year on every job
Price
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

How the visit works

You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours, depending on how many joints need doing in most cases. A visit to Pilgrims Hatch is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We look at the glazing and agree which joints need resealing.
  2. Old sealant is removed from the glass and frame.
  3. We clean and prepare the joint.
  4. New glazing silicone goes in and is finished neatly.
  5. We inspect the work and test it where we can.

How to prepare

  • Plan for the work area to be out of bounds to pets and children
  • Mention if the joints have been sealed before
  • Mention any parking rules near the property

Getting a quote

There’s no standard price list. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or drop us an email.

Get a price

Related advice

Common problems we fix in Pilgrims Hatch

Dirt and grease stop silicone sticking. If the glass and frame weren’t cleaned properly the sealant may lift within a few years.

It’s worth asking for a quote if you see:

  • Rooflight joints letting water in
  • Mouldy sealant around glass panels
  • Conservatory leaks at frame and glazing joints
  • Sealant that was laid over old silicone and failed

For an older house near a landmark such as Saint George's church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.

What your quote should include

  • When the joint can take water or movement
  • Which sealant they’ll use, and why
  • Whether VAT is included
  • The length of the guarantee

How to choose a mastic man

Pilgrims Hatch homes and the weather

Historic houses like Ingatestone Hall (about 4.6 miles north-east) are a reminder that the area around Pilgrims Hatch has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

Managing a site like Larchwood Primary School? Then the mastic around its windows and doors needs looking after like any other building’s. Letting a property close to Brentwood station? Then a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.

Pilgrims Hatch is about 1 mile north-west of Brentwood, in Essex. Anywhere in CM15, we cover glazing silicone for homes and businesses. We cover 644 towns and villages across Essex, from the larger towns to small villages. Our Chelmsford page covers work nearby (11 miles or so).

Work in CM15 and CM14 works the same way as everywhere else we cover. Streets in the area include Ongar Road, Hatch Road and Green Lane. Other places close to Pilgrims Hatch include Crow Green (1 mile north), South Weald (1 mile south-west), Coxtie Green (1 mile west), Bentley (1 mile north-west) and Doddinghurst Common (2 miles north-west). Larger places within reach include Chelmsford (11 miles north-east), Basildon (8 miles south-east), Harlow (12 miles north-west), Canvey Island (15 miles south-east), Billericay (6 miles east) and Rayleigh (14 miles east).

What’s near Pilgrims Hatch

We work in homes and buildings around Black Horse Inn, Sawyers Hall College and Weald Country Park, among other places. The nearest railway station is Brentwood station, roughly 1.6 miles south of the centre. A little further out are Brentwood Community Hospital (1.4 miles south-east). Open spaces near Pilgrims Hatch include Thorndon Park.

Map of Pilgrims Hatch © OpenStreetMap contributors

Questions from Pilgrims Hatch

Can you do glazing silicone in Pilgrims Hatch?

Yes. Our work covers London and the South East, and Pilgrims Hatch is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we will send you a clear quote.

Do you work for landlords with property near Brentwood station?

Yes. We work for letting agents and landlords as well as homeowners. You can phone 0345 464 0079 or email us with the details for a clear quote.

Do you replace glass?

No. Misting between panes means the sealed unit has failed and needs replacing by a glazier.

Do I have to be there?

For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.

Do you take out the old sealant first?

Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.

Can you do several jobs on one visit?

Yes. Several rooms, windows or areas can go on one quote.

Are you ARBOMaster approved?

Yes. We hold ARBOMaster approved applicator status.

Where are you based?

Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.

Aftercare tips

How long the joints last depends on use and care. We suggest:

  • Check the gutters above the glazing for debris
  • Run a squeegee over the glass when you are done
  • Get a new leak looked at quickly
  • Look over the glazing joints once a year

Keep the new joints dry for as long as we advise so the silicone can set properly. From then on, a mild glass cleaner is all it needs.

Cracked glazing silicone means the joint has failed. Renewing it early keeps it simple compared with fixing water damage later.

Can I do it myself?

The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.

What affects the cost of glazing silicone

Jobs vary more than people expect. What affects the quote:

  • Any mould that needs treating
  • Whether the work is at height
  • The number of rooms or windows
  • The product the joint needs

Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.

What we need to know

Before you ask for a quote, have a think about:

  • Pictures of the joints, sent by email
  • What the problem is, such as mould, gaps, leaks or cracking
  • Roughly how big the job is
  • If someone has resealed it before

Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we will take it from there.

Honest limits

New sealant cannot fix everything, and we’ll tell you before any work starts. Sealant won’t put right:

  • A sealed unit that has misted inside
  • Leaks from the roof covering or flashing (a roofer’s job)
  • Rotten or badly damaged frames

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.

Surfaces we seal

  • Conservatory frames
  • Glass-to-frame joints
  • Shower screens
  • Glass-to-glass joints
  • Glass balustrade bases
  • Rooflights
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job