West Sussex · England
Glazing Silicone in Pagham
Specialist glazing silicone for Pagham: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Water getting into a conservatory at the joints
- Rooflight joints letting water in
- Glazing silicone that has cracked or come away
Glazing silicone for homes and businesses in Pagham
Glazing silicone is a maintenance item. Sun, rain and movement wear it down, and once it cracks, water follows. Resealing puts that right. We’re often asked to deal with water tracking down the inner face of the glass and failed sealant around rooflight glass, across glass-to-frame joints, shower screens and glass-to-glass joints.
Mastic can only go onto a dry, clean joint, so window work in Pagham is booked around the forecast. Let us know about access to all the frames, upstairs ones included.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Pagham (PO21)
- Wider area
- West Sussex
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026

What happens on the day
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take anything from an hour or two to most of a day, depending on the size of the job. For a village or hamlet like Pagham, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree the joints to be done.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Tell us if parking is tricky
- Let us know if you’ve seen damp or leaks
Getting a quote
If you’re in Pagham and need glazing silicone, phone 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
What the job involves on each surface
Glass-to-frame joints
Glass-to-frame joints need a sealant that bonds to both. We use a glazing silicone suited to each.
Conservatory frames
Exposed frame joints wear with the weather. A fresh bead seals them again.
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- Structural problems with a conservatory roof
- A frame that needs repairing or replacing
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before booking.
Surfaces we seal
- Glass-to-frame joints
- Glass balustrade bases
- Rooflights
- Glass-to-glass joints
- Shower screens
- Conservatory frames
Frames and glazing around Pagham
Pagham is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on glazing joints and frame seals, especially on the side facing the sea. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you let a flat or house near Bognor Regis station, glazing joints are worth checking at the end of a tenancy, before a small leak grows. Managing a site like Rose Green Infant School? Then larger buildings have plenty of frames, and the mastic around each one ages. Homes close to The Parish Church of St Thomas A Becket include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Pagham is about 3 miles south-west of Bognor Regis, in West Sussex. Every kind of property in Pagham is covered for glazing silicone. The work is guaranteed for a year. Pagham is one of 371 places in West Sussex where we work for glazing silicone. There’s also a page for Portsmouth, roughly 15 miles from Pagham.
We cover every part of PO21 for glazing silicone. You’ll find streets such as Swan Dene, Sea Lane and Well Road. If you’re just outside Pagham, we cover Nyetimber (1 mile north-east), Aldwick (2 miles north-east), Church Norton (2 miles south-west), Sidlesham (2 miles west) and South Mundham (2 miles north). Further out, we also cover Worthing (15 miles east), Bognor Regis (3 miles north-east), Chichester (5 miles north), Selsey (3 miles south-west), Littlehampton (10 miles east) and Emsworth (10 miles north-west).
What’s near Pagham
Around Pagham, our work takes us to homes and buildings near The Lamb pub and Avisford. Pagham’s nearest station is Bognor Regis station, roughly 3.2 miles north-east. A little further out are Bognor Regis War Memorial Hospital (3.3 miles north-east) and Bognor Regis Museum (2.9 miles east).
Places near Pagham
What else we do in Pagham
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Keep harsh solvents off the silicone
- Look over the glazing joints once a year
- Act on drips or damp patches early
- Squeegee the shower screen after each use
Check the joints once a year. Catching a split early keeps the repair small, before water gets in.
Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below before you spot it.
Common questions in Pagham
Will you come out to Pagham?
Yes. Pagham is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Does the coastal weather in Pagham affect outside sealant?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are generally the first to need attention.
Can you reseal a frameless shower screen?
Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.
Do you work for letting agents?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels across West Sussex.
Is the work guaranteed?
There’s a 12-month guarantee on every job.
Can I add another job to the visit?
Yes. Just list everything you need and we will quote it together.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Pagham.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Quotes for glazing silicone in Pagham
We don’t publish a price list. The quote depends on:
- Mould in or behind the old joints
- Working hours on commercial sites
- How easy the joints are to reach
- The number and length of the joints
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Asking for a quote
When you contact us, these details help:
- The rough size of the job
- Where the job is, and your postcode
- If someone has resealed it before
- Photos by email, if that is easy
Asking for a quote is easy: tell us what needs doing and where. A few pictures by email make the job easier to understand, and we will take it from there.
Leave it or put it right?
Fixing a leaking screen early protects what’s underneath. A small leak can reach the floor below before it shows. Around Pagham, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, ring 0345 464 0079 or email us and we will give you an honest view and a quote.
What you get with us
- We never seal over old sealant
- Fully insured
- Domestic, commercial and hotel work
- 180+ five-star Google reviews
Can I do it myself?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
