Hampshire · England
Glazing Silicone in Lymore
Glazing silicone across Lymore and nearby, with old sealant always removed completely.
- Rooflight joints letting water in
- Split or lifting silicone on glass
- New silicone smeared over old sealant
When it is not the sealant
We will always be straight with you, so here’s what new sealant will not do:
- Glass that needs replacing
- Structural problems with a conservatory roof
- Frames that have decayed or split
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
Where we work in Lymore
- Glass balustrade bases
- Glass-to-frame joints
- Glass-to-glass joints
- Shower screens
- Conservatory frames
- Rooflights
Glazing silicone in Lymore
We do not replace glass, and misting between panes means a failed sealed unit. What we do is the silicone around the glass and that’s often where the water gets in. If you’re dealing with stained, discoloured glazing silicone and new silicone smeared over old sealant, we can help, whatever the surface.
Mastic can only go onto a dry, clean joint, so window work in Lymore is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or drop us an email.
- Where
- Lymore (SO41)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Surface by surface
Conservatory frames
Frame joints face sun and rain all year. A fresh bead seals them again.
Glass-to-glass joints
Glass-to-glass joints depend entirely on the sealant. The bead needs to be tidy and fully bonded.
Landlords, agents and businesses in Lymore
Landlords and letting agents in Lymore can book us as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
If you manage several properties in or around Lymore, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
The process
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for most jobs. For a village or hamlet like Lymore, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the glazing and agree which joints need resealing.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
How to prepare
- Tell us about any water getting in
- Tell us if parking is tricky
- Mention any tricky access
Ask for a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved.
Read more
What happens if it’s left?
A leaking joint won’t fix itself. Left, water can mark floors, damage plaster and rot timber, so it pays to deal with it early. Older cottages and farmhouses around Lymore can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why choose Mr Mastic in Lymore
- Anti-fungal sanitary silicone in wet areas
- An ARBOMaster approved applicator
- We leave the area clean and tidy
- White, clear, grey or another colour, product permitting
Take a look at our cost guide or our reviews.
Questions from Lymore
Is glazing silicone in a coastal place like Lymore any different?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Do you cover smaller places like Lymore?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you do commercial work?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
What guarantee do I get?
You get our one-year guarantee to every job we do.
How long will you be here?
A typical job takes a few hours for most jobs. We’ll confirm how long when we quote.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Do you take out the old sealant first?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Places near Lymore
What else we do in Lymore
Aftercare tips
So the new joints stay in good condition:
- Act on drips or damp patches early
- Wipe the screen down after showering
- Keep harsh solvents off the silicone
- Open vents or windows to let moisture out
Check the joints once a year. Spotting a crack early means a simpler fix, before water gets in.
If silicone on glass has cracked, water is already getting in. Resealing now is a small job compared with fixing water damage later.
Lymore homes and the weather
Lymore is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For landlords with property near Lymington Town station, glazing joints are worth checking at the end of a tenancy, before a small leak grows. Homes close to Church of All Saints include some older properties, and the joint between an old wall and a newer frame is normally the first place rain gets in. Managing a site like Milford-on-Sea Church of England Primary School? Then larger buildings have plenty of frames, and the mastic around each one ages.
Lymore is about 2 miles south-west of Lymington, in Hampshire. Every kind of property in Lymore can book us for glazing silicone, old or new, large or small. The work is guaranteed for a year. Across Hampshire, we cover 683 places, Lymore among them. You can also see our page for Southampton, roughly 15 miles from Lymore.
Our applicators cover all of the SO41 postcode area for glazing silicone and the streets around it. Local streets include Lymore Valley, Lymore Lane and School Lane, and we cover them all. If you are just outside Lymore, we cover Everton (1 mile north), Milford on Sea (1 mile south-west), Keyhaven (1 mile south-east), Lower Pennington (1 mile east) and Pennington (2 miles north-east). We also work in nearby towns such as Totton (13 miles north), Hythe (12 miles north-east), New Milton (4 miles west), Ringwood (12 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).
Near you in Lymore
In Lymore, that means homes and buildings near Priestlands School and The Crown Public House. The nearest railway station is Lymington Town station, roughly 2.7 miles north-east of the centre. A little further out are Lymington New Forest Hospital (2.9 miles north-east) and St Barbe Museum and Art Gallery (2.4 miles north-east). For a walk, there’s Milford on Sea LNR.