Surrey · England
Glazing & conservatory sealant in Kingswood, Surrey
Glazing silicone for conservatories, rooflights, glass panels and shower screens for Kingswood, backed by a 12-month guarantee. Call for a quick quote.
- Drips on the inside of a conservatory window
- Black or yellowed silicone on glass joints
- Cracked silicone between glass panels
Different surfaces, different methods
Rooflights
A rooflight faces rain and sun from above. The sealant around the glass and frame wears faster than most.
Glass-to-frame joints
We cut the old silicone from the glass without scratching it and reseal with glazing silicone.
Glazing silicone in Kingswood, done properly
Glass and frames expand and contract differently, and the silicone between them takes the strain. Once it splits or comes away, water finds a way through. We cut it out and reseal with a glazing silicone suited to the joint. Typical jobs include drips on the inside of a conservatory window and water getting into a conservatory at the joints, across shower screens, glass-to-glass joints and conservatory frames.
Around Kingswood, conservatories, garden rooms and patio doors are often part of the house. Their glazing joints and frame seals are as much a part of the job as the windows.
Your job is guaranteed for a year, as with all our work.
- Where
- Kingswood (KT20)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Landlord and commercial work in Kingswood
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.
Nearby places to Kingswood
What else we do in Kingswood
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Act on drips or damp patches early
- Look over the glazing joints once a year
- Avoid scraping close to the bead
- Avoid strong solvents on or near the sealant
On shower screens, wipe or squeegee after use and let the room air. That slows mould growth on the bead.
Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part and we’ll find out which.
When to call us in Kingswood
Sunlight breaks sealant down and roof joints get the most sun. Old silicone hardens, cracks and loses its grip to the glass and frame.
Signs it’s time to call us include:
- Water escaping where a screen meets the wall
- Water getting into a conservatory at the joints
- Glass-to-glass joints that have split
- Rooflight joints letting water in
Rented homes near Kingswood station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.
What to look for in a quote
- How the surfaces are prepared before sealing
- Whether all the old sealant comes out first
- Is VAT in the price?
- When the joint can take water or movement
FAQs for Kingswood
Will you come out to Kingswood?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you do glazing silicone in Kingswood?
Yes. Our work covers London and the South East, and Kingswood is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing.
What does glazing silicone cost?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or email us with a short description of the job.
Can you quote for more than one area?
Yes, we can. Several rooms, windows or areas can go on one quote.
Is it possible to redo the silicone on a shower screen?
Yes, it’s a common job. We use anti-fungal silicone suited to bathrooms.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Why not top up the existing silicone?
New silicone won’t bond to old silicone, so a top-up soon lets water through. We cut out the old sealant first.
Is balustrade sealant something you do?
Yes, we reseal the joint at the base channel. We don’t install or replace the glass.
Kingswood homes and the weather
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. With historic houses such as Fitznells Manor (about 4.6 miles north) nearby, there’s older building stock in the area around Kingswood as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
For an older house near a landmark such as Church of St Andrew, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall. Schools such as Tadworth Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.
Kingswood is about 4 miles south-west of Coulsdon, in Surrey. Whether you’re in the middle of Kingswood or further out, glazing silicone is available for homes and businesses alike, from flats and houses to offices and hotels. Kingswood is one of 395 towns and villages in Surrey we cover for glazing silicone. We also work in Crawley, around 12 miles away.
Here we cover the KT20 postcode area for glazing silicone. Streets in the area include Beech Drive, Bears Den and Hamilton Place, and we cover them all. Kingswood sits on or near the B2032. Nearby, we also carry out glazing silicone in Tadworth (1 mile north-west), Lower Kingswood (1 mile south), Walton on the Hill (2 miles south-west), Margery (2 miles south) and Mogador (2 miles south). Further out, we also cover Epsom (4 miles north-west), Horley (8 miles south), Redhill (4 miles south-east), Ewell (5 miles north-west), Reigate (4 miles south) and Walton-on-Thames (11 miles north-west).
Around Kingswood
Typical jobs here are in homes near The Beacon School, Kingswood Arms and Chinthurst School, among other places. There’s a railway station in Kingswood itself: Kingswood station. A little further out are The Ashley Centre (3.8 miles north-west) and Walton on the Hill (1.7 miles west). Open spaces near Kingswood include Colley Hill and Cuddington Meadows.
The process
You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes anything from an hour or two to most of a day, depending on the size of the job in most cases. In a smaller place like Kingswood, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- First we agree the joints to be done.
- We cut away the failed silicone.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
Preparing for the visit
- Mention any parking rules near the property
- On commercial sites, let us know about site rules
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work.
Related advice
When it is not the sealant
Before you book, it’s worth knowing the limits:
- A broken pane or roof panel
- Frames that have decayed or split
- Leaks from the roof covering or flashing (a roofer’s job)
If in doubt, ring 0345 464 0079 or email us and we will say what we think.
Joints and surfaces we work on
- Shower screens
- Conservatory frames
- Glass-to-glass joints
- Glass-to-frame joints
- Glass balustrade bases
- Rooflights