Brighton and Hove · England

Glazing Silicone in Hollingdean

Problem with your glazing joints in Hollingdean? We cut out the old, prepare the joints and apply the right sealant.

  • Split or lifting silicone on glass
  • Shower screens leaking along the wall or tray
  • Water running down inside the glass

Need glazing silicone in Hollingdean?

Glazing silicone for homes and businesses in Hollingdean

Many conservatory leaks come down to failed sealant, where glass meets frame or frame meets wall. We find the joint that’s letting water in and renew it, and if it’s something sealant can’t fix, we’ll tell you. Common call-outs are for conservatory leaks at frame and glazing joints and sealant that was laid over old silicone and failed, across glass-to-glass joints, glass-to-frame joints and glass balustrade bases.

Many houses in smaller places like Hollingdean have conservatories, garden rooms or patio doors. Their glazing joints and frame seals are as much a part of the job as the windows.

The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.

Place
Hollingdean (BN1, BN2)
Region
Brighton and Hove
Cover
12 months on all our work
Quotes
A clear price before any work starts
Call
0345 464 0079
Page updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

Looking after it afterwards

Good habits help new joints last longer. A few tips:

  • Get a new leak looked at quickly
  • Keep scrapers and blades away from the silicone
  • Open vents or windows to let moisture out
  • Squeegee the shower screen after each use

Look over the glazing joints every year or so. Spotting a crack early means a simpler fix, before water gets in.

Damp patches, drips and condensation along a joint are worth checking. It may be sealant, or something else and we will find out which.

What affects the quote in Hollingdean

We do not publish a price list, because no two jobs are the same. The quote depends on:

  • Working hours on commercial sites
  • How many rooms, windows or areas are involved
  • How easy the joints are to reach
  • Whether old sealant or filler has to be cut out

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or email us for an honest opinion and a quote.

What to tell us for a quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Where the property is
  • How we’d reach the joints
  • What’s wrong with the joints now
  • The rough size of the job

Asking for a quote is easy: tell us what needs doing and where. Photos by email help us understand the job, and we’ll take it from there.

DIY sealant or a professional job?

A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.

The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

Hollingdean questions

Do you work for landlords with property near Moulsecoomb station?

Yes, rental work is part of what we do. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.

Do you cover smaller places like Hollingdean?

Yes. Hollingdean is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Does someone need to be in?

Access is agreed with you when the job is booked. For inside work, that normally means someone being in.

Are you fully insured?

Yes. Mr Mastic is fully insured.

Will there be a smell?

There can be a smell while the sealant cures. Opening a window helps.

Can you reseal the base of a glass balustrade?

Yes, we reseal the joint at the base channel. We don’t install or replace the glass.

Are you ARBOMaster approved?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.

Can you fix a leaking conservatory?

Often, if the leak is at a sealant joint. We trace the leak first, so you know what you are paying for.

Landlords, agents and businesses in Hollingdean

For anyone letting property in or around Hollingdean, several properties can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.

What sealant work cannot fix

In fairness, there are a few things sealant will not fix:

  • A sagging or failing conservatory roof
  • Water coming through the roof rather than a sealant joint
  • Glass that needs replacing

If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.

Surfaces we seal

  • Rooflights
  • Shower screens
  • Conservatory frames
  • Glass-to-glass joints
  • Glass-to-frame joints
  • Glass balustrade bases

How the job changes by surface

Glass-to-frame joints

The sealant must stick to glass and frame alike. We choose a product that suits both.

Glass-to-glass joints

Where two panes meet, the silicone joint takes all the movement. The bead needs to be tidy and fully bonded.

Windows and doors in Hollingdean

Hollingdean is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on glazing joints and frame seals, especially on the side facing the sea. Historic houses like Preston Manor & Gardens (about 0.9 miles west) are a reminder that the area around Hollingdean has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.

If you live in an older home near St Richard's, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall. Schools such as Hertford Infant and Nursery School are buildings too, and larger buildings have plenty of frames, and the mastic around each one ages. If you let a flat or house near Moulsecoomb station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

Hollingdean is about 1 mile north of Brighton, in Brighton and Hove. Jobs in Hollingdean get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Hollingdean is one of 30 places in Brighton and Hove we cover for glazing silicone.

Postcode districts we cover here for glazing silicone: BN1 and BN2. We cover properties on Mayo Road, Dewe Road and Rugby Road. Neighbouring places we cover for glazing silicone include Brighton (1 mile south), Preston (1 mile west), Moulsecoomb (1 mile east), Prestonville (1 mile south-west) and Hanover (1 mile south). Further out, we also cover Brighton and Hove (3 miles west), Aldrington (3 miles west), Hangleton (3 miles west), Saltdean (5 miles south-east), East Saltdean (5 miles south-east) and Roedean (3 miles south-east). Hollingdean is one of the larger places we cover in Brighton and Hove.

What’s near Hollingdean

We work in homes and buildings around Varndean School, William Clarke Park and The Pub at Fiveways and the streets around them. The closest station to Hollingdean is Moulsecoomb station, about 0.5 miles east. Nearby you will also find Brighton General Hospital (1.1 miles south-east) and Clayton Castle (4.6 miles north). Green spaces nearby include Newmarket Hill and Bevendean Down.

Map of Hollingdean © OpenStreetMap contributors

What we do, step by step

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take a few hours, depending on how many joints need doing, and we tell you how long to leave it before we go. A visit to Hollingdean is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. First we agree the joints to be done.
  2. We cut away the failed silicone.
  3. We clean and prepare the joint.
  4. We apply and tool the new silicone.
  5. We inspect the work and test it where we can.

Getting ready for the visit

  • Mention any parking rules near the property
  • On commercial sites, let us know about site rules
  • Tell us about any previous sealing or DIY attempts

How to get a quote

We quote each job on its own. Just ring 0345 464 0079 or drop us an email with the details.

Ask for a quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job