Hampshire · England
Hill Grove Glazing Silicone
Professional glazing silicone in and around Hill Grove, with old sealant always removed completely and a 12-month guarantee.
- Water tracking down the inner face of the glass
- Black or yellowed silicone on glass joints
- Leaks from the base of a shower screen
Why deal with it now?
A quick bead over the old sealant might stop a drip for a while, but silicone doesn’t stick to silicone and water soon finds its way back. Cutting out and resealing properly lasts. In a small place like Hill Grove, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.
Why us?
- Over 20 years’ experience
- Fully insured
- A choice of colours where the product allows
- ARBOMaster approved applicator
Take a look at what affects the cost and our reviews.
About our glazing silicone in Hill Grove
Conservatory leaks often start at a sealant joint at the glass-to-frame or frame-to-wall joints. We find the joint that is letting water in and renew it and tell you plainly if the cause is something else. We work on rooflights, conservatory frames and glass-to-glass joints, and people most often call us about cracked silicone between glass panels and stained, discoloured glazing silicone.
Around Hill Grove, many homes face open ground, so their windows and doors take the full weather. That exposure dries out and cracks the mastic around frames and sills faster.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Hill Grove (SO32)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Also near Hill Grove
What else we do in Hill Grove
Common questions in Hill Grove
Can you help a landlord with a rental near Botley station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Do you cover smaller places like Hill Grove?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How long does glazing silicone take?
A typical job takes a few hours, depending on how many joints need doing, including the preparation. We will confirm how long when we quote.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we’re using and why.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Are you fully insured?
Yes, we’re fully insured for domestic and commercial work.
How long before the joint can be used?
Different products cure at different speeds, so please follow the time we give you.
Landlord and commercial work in Hill Grove
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
How we quote for glazing silicone
Every job gets its own quote. These are the things that affect it:
- Mould in or behind the old joints
- The old material and how stubborn it is
- The type of sealant required
- The number and length of the joints
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, phone 0345 464 0079 or email us for an honest opinion and a quote.
Asking for a quote
When you call or email, it’s useful to know:
- The address or postcode of the job
- The rough size of the job
- Whether it has been sealed before
- What’s wrong with the joints now
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or drop us an email.
The process
Good joint work is mostly preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes a few hours for most jobs. For a village or hamlet like Hill Grove, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Advice
Windows and doors in Hill Grove
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For an older house near a landmark such as Church of St Barnabas, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. Managing a site like Swanmore Church of England Aided Primary School? Then larger buildings have plenty of frames, and the mastic around each one ages. If you let a flat or house near Botley station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.
Hill Grove is about 6 miles east of Hedge End, in Hampshire. For glazing silicone in and around Hill Grove, please phone 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Hampshire. Our area takes in 683 places across Hampshire. Southampton is on our list too, around 10 miles away.
Here we cover the SO32 postcode area for glazing silicone. Glazing silicone is available to properties on Droxford Road, Hill Grove Lane and Dodds Lane and the roads around them. Neighbouring places we cover for glazing silicone include Swanmore (1 mile west), Upper Swanmore (1 mile north), Mislingford (1 mile south), Kingsmead (2 miles south) and Shirrell Heath (2 miles south-west). We also work in nearby towns such as Winchester (10 miles north-west), Gosport (10 miles south), Havant (10 miles south-east), Eastleigh (8 miles west), Fareham (6 miles south) and Horndean (7 miles east).
What’s near Hill Grove
Locally, jobs take us to homes and businesses close to Swanmore College of Technology and the streets around them. The closest station to Hill Grove is Botley station, about 4.1 miles south-west of the centre. Well-known places in the area include Knowle Hospital (4.4 miles south) and Bishop's Waltham Museum (2.1 miles north-west). Open spaces near Hill Grove include St Clair's Meadow and Beacon Hill.
How the job changes by surface
Conservatory frames
Frame joints face sun and rain all year. A fresh bead seals them again.
Shower screens
Black or peeling silicone on a screen lets water out. Cutting it out and resealing fixes it.
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Run a squeegee over the glass when you’re done
- Avoid strong solvents on or near the sealant
- Check the silicone on glass every year or so
- Keep conservatory gutters clear of leaves
Follow the cure time we give you before the joints get wet so the silicone can set properly. From then on, a mild glass cleaner is all it needs.
Act on black or lifting silicone early. Peeling silicone lets water in behind and the leak gets worse.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.