Hertfordshire · England

Glazing Silicone in Felden

Our applicators work in Felden on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.

  • Split or lifting silicone on glass
  • Failed sealant around rooflight glass
  • Water running down inside the glass

Need glazing silicone in Felden?

Landlord and commercial work in Felden

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.

If you manage several properties in or around Felden, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.

Glazing silicone in Felden, done properly

Glazing joints need a sealant made for glass. Our applicators use neutral-cure glazing silicone, which suits glass and most frame materials, and we tool it to a neat, even finish. We work on shower screens, glass-to-frame joints and glass-to-glass joints, and common reasons people get in touch are cracked silicone between glass panels and glazing silicone that has cracked or come away.

Many houses in smaller places like Felden have conservatories, garden rooms or patio doors. Those joints need the same attention as the main windows.

We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.

Where
Felden (HP3, WD4)
Region
Hertfordshire
Cover
12 months on all our work
Price
A clear price before we start
Telephone
0345 464 0079
Updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

How we quote for glazing silicone

You’ll get a clear quote before work begins. It takes into account:

  • How easy the joints are to reach
  • How much there is to do
  • The old material and how stubborn it is
  • Any mould that needs treating

Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.

What we need to know

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • The address or postcode of the job
  • How many joints, rooms or windows are involved
  • Any access issues, like height or stairs
  • The type of property

Every job is quoted individually. Just phone 0345 464 0079 or drop us an email with the details.

Common problems we fix in Felden

UV light ages silicone, especially on conservatory roofs. Old silicone hardens, cracks and loses its grip to the glass and frame.

The problems people normally mention when they call include:

  • Leaks where conservatory glass meets the frame
  • Mouldy sealant around glass panels
  • Water tracking down the inner face of the glass
  • A quick top-up bead that didn’t last

Schools such as Nash Mills Church of England Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.

Comparing quotes

  • Whether the sealant suits the joint
  • How long to leave it before use
  • How much experience the applicator has
  • What happens if they find a problem under the old sealant

How to choose a mastic man

What we do, step by step

A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and clear up. Most jobs take a few hours for most jobs. Parking around Felden is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.

  1. We look at the glazing and agree which joints need resealing.
  2. Old sealant is removed from the glass and frame.
  3. We clean and prepare the joint.
  4. We apply and tool the new silicone.
  5. We inspect the work and test it where we can.

Before we arrive

  • Mention any tricky access
  • Let us know about earlier repairs to the joints
  • Mention any sign-in or site rules at work premises

Get a quote

If you’re in Felden and need glazing silicone, ring 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.

Get a quick quote

Read more

Felden homes and the weather

Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like High Elms Manor (about 3.4 miles south-east) are a reminder that the area around Felden has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.

Rented homes near Apsley station change hands often, and leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. In the older streets around Church of St Mary, frames set in older brick or stone need a sealant that suits the wall as well as the frame.

Felden is about 2 miles south of Hemel Hempstead, in Hertfordshire. We carry out glazing silicone for homes and businesses in Felden and nearby. Across Hertfordshire, we cover 381 places, Felden among them. You can also see our page for London, about 22 miles away.

We cover every part of the HP3 and WD4 postcode area for glazing silicone and the streets around it. You will find streets such as Pond Road, Rose Lane and Lower Road. Close by, we work in Nash Mills (1 mile east), Rucklers Lane (1 mile south), Apsley (1 mile north-west), Bennetts End (1 mile north-east) and Kings Langley (1 mile south-east). Further out, we also cover Watford (5 miles south-east), St Albans (6 miles east), Welwyn Garden City (12 miles east), Harpenden (8 miles north-east), Hatfield (10 miles east) and Borehamwood (9 miles south-east).

Around Felden

In Felden, that means homes and buildings near Kings Langley School and The Paper Mill pub, among other places. There’s a railway station in Felden itself: Apsley station. A little further out are Hemel Hempstead Hospital (1.5 miles north). Green spaces nearby include Long Deans and Verulamium Lake.

Map of Felden © OpenStreetMap contributors

Can I do it myself?

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

How to look after the new joints

To keep the joints looking good and working properly:

  • Look over the glazing joints once a year
  • Keep air moving in the conservatory
  • Keep conservatory gutters clear of leaves
  • Keep scrapers and blades away from the silicone

On shower screens, wipe or squeegee after use and keep the room ventilated. It helps stop mould getting into the silicone.

Shower screen leaks can go unnoticed. It can damage the floor or the ceiling below long before you see it.

FAQs for Felden

Can you help a landlord with a rental near Apsley station?

Yes. We work for landlords and agents as well as homeowners. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear quote.

Is it worth replacing old sealant in an older home in Felden?

Generally, yes, if it’s cracked, shrunk, mouldy or coming away. New sealant won’t stick to old, so the old bead has to come out completely first.

Where do you work from?

Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.

How long should I leave it?

Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used.

How long will you be here?

As a guide, most jobs take anything from an hour or two to most of a day, depending on the size of the job. Larger jobs naturally take longer.

Do you replace glass?

No. A misted unit has failed inside and needs replacing by a glazier.

Is it worth trying it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Can you just put new silicone over the old?

Many leaks we see come from exactly that. We remove the old silicone, clean the joint and reseal.

Different surfaces, different methods

Conservatory frames

Frame joints face sun and rain all year. A fresh bead seals them again.

Glass balustrade bases

We reseal the joint where the glass meets the base channel. We do not install or replace glass.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job