Aberdeenshire · Scotland
Glazing Silicone in Dinnet
Glazing silicone for conservatories, rooflights, glass panels and shower screens for Dinnet, backed by a 12-month guarantee. Call for a quick quote.
- Sealant that was laid over old silicone and failed
- Water tracking down the inner face of the glass
- Conservatory leaks at frame and glazing joints
Leave it or put it right?
Topping up old silicone can look like a fix, but new silicone will not bond to old and water soon finds its way back. Cutting out and resealing properly lasts. In a place like Dinnet, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why us?
- Sanitary silicone with an anti-fungal additive in wet areas
- Colour agreed with you before any work starts
- Neat joints and a tidy finish
- Over 20 years’ experience
See what affects the cost or our reviews.
How we handle glazing silicone in Dinnet
Glass replacement isn’t something we do and a misted double-glazed unit needs a glazier. What we do is the silicone around the glass and that’s often where the water gets in. If you’re dealing with split or lifting silicone on glass and sealant that was laid over old silicone and failed, we can put it right, on glass-to-frame joints, glass-to-glass joints and shower screens alike.
In and around a place like Dinnet, homes range from older stone-built cottages to newer houses. Exposed frames and sills take the full force of wind-driven rain.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Location
- Dinnet (AB34)
- Region
- Aberdeenshire
- Guarantee
- One year on every job
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Landlords and letting agents in Dinnet can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Check the gutters above the glazing for debris
- Stick to mild cleaners on glass
- Get a new leak looked at quickly
- Run a squeegee over the glass when you are done
Check the joints once a year. Catching a split early keeps the repair small.
A small conservatory leak soon spreads. Water runs along frames and down walls, so get it looked at when you first see it.
Your questions about glazing silicone in Dinnet
Is glazing silicone in Dinnet guaranteed?
All our work, in Dinnet and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Is Dinnet in your area for glazing silicone?
Yes, Dinnet is within the area we cover. We work across all of Scotland. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
What sealant do you use on glazing?
Glass needs a sealant made for glazing. Ours is a neutral-cure glazing silicone with anti-fungal products in bathrooms.
Can you reseal the base of a glass balustrade?
We can. We cut out the failed sealant and reseal the base joint with a suitable product.
What does glazing silicone cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
Why not top up the existing silicone?
New silicone won’t bond to old silicone and water gets between the layers. The old bead always comes out first.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. Then email us at info@mrmastic.co.uk.
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Other services in Dinnet
How the job changes by surface
Rooflights
Rooflight glazing joints are cut out and renewed. If the leak is from the roof around it, a roofer needs to look.
Conservatory frames
The joints where the conservatory meets the house take a lot of movement. We reseal them with a sealant suited to the frame.
Windows and doors in Dinnet
Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that. Sash and case windows are common in older Scottish homes, often pointed into the wall with traditional sand mastic.
In the older streets around Dinnet Parish Church, the joint between an old wall and a newer frame is normally the first place rain gets in. In and around Dinnet, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint.
Dinnet is about 24 miles south-west of Inverurie, in Aberdeenshire. If you need glazing silicone in Dinnet, please send an email to info@mrmastic.co.uk for a quick quote. We cover Aberdeenshire from our Crawley base, Dinnet included. Dinnet is one of 161 towns and villages in Aberdeenshire where we work. Aberdeen is on our list too, about 29 miles from Dinnet.
We work across AB34 for glazing silicone. Being close to the B9158, Dinnet is easy for our applicators to reach. If you are just outside Dinnet, we cover Aboyne (4 miles east), Tarland (4 miles north), Birsemore (4 miles east), Ballater (6 miles west) and Kincardine O'Neil (8 miles east). Further out, we also cover Banchory (15 miles east), Alford (13 miles north-east) and Torphins (10 miles east).
Landmarks near Dinnet
A little further out are Kinord Castle (1.4 miles north-west) and Aboyne Hospital (4.7 miles east). For a walk, there’s Culblean Hill and Loch Kinord.
How it works
The work is kept neat and contained to the area we’re working on, so you can get on with your day. The job usually takes a few hours, depending on how many joints need doing. Somewhere like Dinnet may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we agree the joints to be done.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Before we arrive
- Mention any sign-in or site rules at work premises
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about earlier repairs to the joints
How to get a quote
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Related advice
What affects the quote in Dinnet
The price is agreed before any work begins. It’s based on:
- Any working-time requirements on site
- The product the joint needs
- How much there is to do
- How much old sealant there is and how hard it is to remove
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We will give you a clear quote for the lot.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- A few pictures by email, if you can
- Where the job is, and your postcode
- The type of property
- The rough size of the job
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.