West Sussex · England
Glazing & conservatory sealant in Bolney, West Sussex
Glazing silicone for conservatories, rooflights, glass panels and shower screens for Bolney, backed by a 12-month guarantee. Ask us for a quote.
- Silicone pulling away from the glass
- Black or yellowed silicone on glass joints
- Leaks from the base of a shower screen
Landlords, agents and businesses in Bolney
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.
Landlords and letting agents in Bolney can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Glazing silicone for homes and businesses in Bolney
Glass replacement isn’t something we do and a misted double-glazed unit needs a glazier. What we do is the silicone around the glass and that is often where the water gets in. We are often asked to deal with rooflight joints letting water in and new silicone smeared over old sealant, on conservatory frames, shower screens and glass-to-frame joints.
Homes in small places like Bolney often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.
Whatever the size of the job, you get the same one-year guarantee in Bolney and across West Sussex.
- Place
- Bolney (RH17)
- Region
- West Sussex
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Bolney homes and the weather
Historic houses like Ockenden Manor (about 2.5 miles east) are a reminder that the area around Bolney has older buildings as well as new. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Letting a property close to Wivelsfield station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. If you live in an older home near St Mary Magdalene's Church, the joint between an old wall and a newer frame is normally the first place rain gets in. Schools such as Bolney CofE Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.
Bolney is about 4 miles north-west of Burgess Hill, in West Sussex. Homes, rented property, offices and hotels in Bolney can book us for glazing silicone. Every job comes with our 12-month guarantee. Bolney is one of 371 towns and villages in West Sussex where we work. We also work in Crawley, about 8 miles from Bolney.
Our applicators cover all of RH17 for glazing silicone. Streets in the area include The Street, Cherry Lane and Top Street, all of which we cover. Neighbouring places we cover for glazing silicone include Crosspost (1 mile south-west), Twineham Green (2 miles south), Twineham (2 miles south), Wineham (3 miles south-west) and Kent Street (3 miles south-west). Larger places within reach include Crawley (8 miles north), Horsham (7 miles north-west), Worthing (15 miles south-west), Haywards Heath (5 miles east), Burgess Hill (4 miles south-east) and East Grinstead (12 miles north-east).
Around Bolney
For rail, the closest station is Wivelsfield station, roughly 4.1 miles south-east of the centre. Well-known places in the area include The Dene Hospital (2.6 miles south-east) and Cuckfield Museum (2.6 miles east). Green spaces nearby include Blunts Wood and Paiges Meadow.
FAQs for Bolney
Do you work for landlords with property near Wivelsfield station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Is Bolney within the area you cover?
Yes. Bolney is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Where are you based?
Our base is Crawley. We work across South East England, London and Scotland.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before work begins.
Are you insured?
Yes. Full insurance covers our work.
What sealant do you use on glazing?
We use a neutral-cure glazing silicone that suits the glass and frame. In bathrooms, we use anti-fungal silicone.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Leave it or put it right?
Resealing cannot fix a failed unit or a cracked panel. We’ll tell you that rather than seal it anyway and point you to a glazier or roofer. Around Bolney, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why choose Mr Mastic in Bolney
- Quality sealants from Arbo and Everbuild
- A sealant colour to suit the surroundings
- Anti-fungal sanitary silicone in wet areas
- Any old sealant cut out fully, not covered over
Take a look at what affects the cost and our reviews.
How the job changes by surface
Glass-to-frame joints
Glass-to-frame joints need a sealant that bonds to both. We use a glazing silicone suited to each.
Shower screens
A screen’s wall joint and tray joint are where leaks start. Both are resealed with anti-fungal silicone.
Nearby places to Bolney
What else we do in Bolney
Keeping the joints in good condition
So the new joints stay in good condition:
- Do not leave a drip for the next storm
- Check the silicone on glass every year or so
- Wipe the screen down after showering
- Clear the conservatory gutters regularly
Keep conservatory gutters clear, so water drains away from the joints. Blocked gutters can push water where it shouldn’t go.
Don’t leave lifting or mouldy silicone on glazing. Once it starts to peel, water gets behind it and the problem grows.
How we quote for glazing silicone
Your quote is based on your job. We take into account:
- The product the joint needs
- Working hours on commercial sites
- How many areas need sealing
- The number and length of the joints
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Asking for a quote
To make quoting easier, let us know:
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- Any access issues, like height or stairs
- The address or postcode of the job
Every job is quoted individually. Just ring 0345 464 0079 or email us with the details, and photos are welcome.
What happens on the day
Once we are on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take anything from an hour or two to most of a day, depending on the size of the job. Somewhere as small as Bolney, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
How to prepare
- Mention any parking rules near the property
- Let us know if you’ve seen damp or leaks
- Clear items away from the joints we are working on
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.