West Sussex · England

Glazing & conservatory sealant in Kent Street, West Sussex

Our applicators work in Kent Street on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.

  • Water running down inside the glass
  • Leaks from the base of a shower screen
  • Split or lifting silicone on glass

Glazing silicone in Kent Street

About our glazing silicone in Kent Street

Cracked, stained or lifting silicone on glass looks poor and can leak. We remove it without scratching the glass or frame and reseal the joint. Typical jobs include failed sealant around rooflight glass and water running down inside the glass, across conservatory frames, glass-to-frame joints and rooflights.

Outdoor sealant needs dry, clean surfaces, so work on frames around Kent Street is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.

All of our work is guaranteed for twelve months.

Location
Kent Street (RH13)
Wider area
West Sussex
Cover
One year on every job
Quote
A clear quote up front
Phone
0345 464 0079
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

How to look after the new joints

A little care helps the new joints last. We recommend:

  • Avoid scraping close to the bead
  • Run a squeegee over the glass when you’re done
  • Check the gutters above the glazing for debris
  • Do not leave a drip for the next storm

Follow the cure time we give you before the joints get wet so the silicone can set properly. After that, clean glass with a mild cleaner.

A leaking shower screen may not show at first. It can damage the floor or the ceiling below before you spot it.

How the job changes by surface

Shower screens

A screen’s wall joint and tray joint are where leaks start. Both are resealed with anti-fungal silicone.

Conservatory frames

Frame joints face sun and rain all year. Renewed sealant keeps water out.

Frames and glazing around Kent Street

London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

In and around Kent Street, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint.

Kent Street is about 5 miles west of Burgess Hill, in West Sussex. We provide glazing silicone to homes and businesses in Kent Street, as part of our work across West Sussex. Across West Sussex, we cover 371 places, Kent Street among them. You can also see our page for Crawley, roughly 10 miles from Kent Street.

Our applicators cover all of the RH13 postcode area for glazing silicone. Neighbouring places we cover for glazing silicone include Wineham (1 mile south-east), Cowfold (1 mile north-west), Twineham Green (2 miles east), Shermanbury (2 miles south-west) and Twineham (2 miles south-east). Within a short drive, we also cover Crawley (10 miles north), Horsham (7 miles north-west), Worthing (12 miles south-west), Haywards Heath (7 miles east), Burgess Hill (5 miles east) and East Grinstead (15 miles north-east).

Near you in Kent Street

A little further out are The Dene Hospital (3.8 miles east). Green spaces nearby include Knepp Wildland.

Map of Kent Street © OpenStreetMap contributors

When something else is needed

A few problems are outside what sealant work can do:

  • Failed flashing around a conservatory
  • A sealed unit that has misted inside
  • A sagging or failing conservatory roof

If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.

Where we work in Kent Street

  • Conservatory frames
  • Rooflights
  • Shower screens
  • Glass balustrade bases
  • Glass-to-glass joints
  • Glass-to-frame joints

What happens if it’s left?

Replacing windows or a shower screen isn’t needed for a failed joint. Sound glass and frames generally just need resealing. Where a wall is exposed, as many are in small places like Kent Street, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.

What you get with us

  • Homes, businesses and hotels
  • Tidy, careful work
  • A 12-month guarantee on all work
  • ARBOMaster approved applicator

See what affects the cost or customer reviews.

Kent Street questions

Can you do glazing silicone in Kent Street?

Yes, Kent Street is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we will send you a clear quote.

Do you cover smaller places like Kent Street?

Yes. Kent Street is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

What guarantee do I get?

Our 12-month guarantee applies to every job we do.

Do you have insurance?

Yes. We are fully insured.

What should I tell you?

Only a few details: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or send us an email.

Are you an approved applicator?

Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.

Should I try DIY first?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Do the sealants smell?

That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.

For landlords and businesses

Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

Common problems we fix in Kent Street

Glass and frames expand and contract with the temperature at different rates. Over years, that movement tears the silicone.

Most people get in touch after spotting something like this:

  • Water escaping where a screen meets the wall
  • A quick top-up bead that didn’t last
  • Stained, discoloured glazing silicone
  • Conservatory leaks at frame and glazing joints

For jobs in and around Kent Street, choosing the right material for each joint is as important as a tidy finish.

Before you book anyone

  • Which sealant they’ll use, and why
  • How the joint is cleaned and prepared
  • Whether you can choose the colour
  • What insurance they hold

Choosing a sealant specialist

What happens on the day

We keep the work tidy and contained to the joints we are treating. Expect the work to take a few hours for most jobs, and we explain the cure time before we leave. In a small place like Kent Street, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We find where water is getting in and check whether it’s a sealant joint.
  2. The old sealant is removed from the glass and frame without scratching them.
  3. Surfaces are cleaned with a solvent suited to glass and the frame.
  4. We apply a neutral-cure glazing silicone and tool it smooth.
  5. The finished joints are checked and, where it’s safe, tested with water.

Getting ready for the visit

  • Mention any tricky access
  • Mention any sign-in or site rules at work premises
  • Mention if the joints have been sealed before

Get a quote

Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.

Ask for a quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job