Surrey · England
Bisley Glazing Silicone
Glazing joints in Bisley need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Split or lifting silicone on glass
- Sealant that was laid over old silicone and failed
- Drips on the inside of a conservatory window
Questions from Bisley
Is Bisley within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Brookwood station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
What do you need from me for a quote?
Let us know what needs doing and where, plus pictures if you have them. If we need more, we will ask.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours for most jobs. We will tell you when we quote.
Do you reseal glass shower screens?
Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.
Do you take out the old sealant first?
Yes, every time. New silicone does not stick to old silicone, so the joint is cleaned back first.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is normally more efficient.
Are you insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
About our glazing silicone in Bisley
Glazing joints need a sealant made for glass. Our applicators use neutral-cure glazing silicone, which suits glass and most frame materials, and we tool it to a neat, even finish. Typical jobs include water running down inside the glass and silicone pulling away from the glass, across conservatory frames, shower screens and glass-to-glass joints.
Homes around Bisley range from older properties to newer houses, and their windows range just as widely. Each frame material needs the right sealant against the right wall.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or send us an email.
- Place
- Bisley (GU24)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why act early in Bisley
Replacing a conservatory roof is major work. Where the water is getting in through sealant renewing the joint is the simpler fix. If it’s the roof itself, we will tell you. In a smaller place like Bisley, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Combining jobs into one visit normally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Why book with us
- Rated 4.9 stars on Google
- White, clear, grey or coloured to suit, where the product allows
- Sealant colour chosen to suit
- We agree the colour with you first
Read what affects the cost and what customers say.
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Keep conservatory gutters clear of leaves
- Inspect the sealant on glazing annually
- Clean glass with a mild cleaner and a soft cloth
- Keep air moving in the conservatory
Gentle products are best near the sealant. Harsh solvents may damage the bead.
Act on black or lifting silicone early. Peeling silicone lets water in behind and the problem grows.
How the job changes by surface
Shower screens
Silicone holds the water in on frameless screens. We reseal without scratching the glass.
Glass-to-glass joints
These joints are on show, so a straight, even finish matters.
Windows and doors in Bisley
London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Letting a property close to Brookwood station? Then glazing joints are worth checking at the end of a tenancy, before a small leak grows. For an older house near a landmark such as Church of St John the Baptist, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Bisley is about 3 miles west of Woking, in Surrey. Bisley gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across Surrey, we cover 395 places, Bisley among them. Our Reading page covers work nearby, about 17 miles away.
All of GU24 is within our area for glazing silicone. If you need glazing silicone at a property on Hawthorn Way, Germander Drive and Wilcot Close or a nearby road, our applicators can take on the job. You’ll find Bisley on the A322, so it’s easy for us to get to. Other places close to Bisley include Lucas Green (1 mile north-west), West End (1 mile north), Knaphill (1 mile south-east), Sheet's Heath (1 mile south) and Penny Pot (1 mile north-east). We also work in nearby towns such as Guildford (6 miles south-east), Woking (3 miles east), Camberley (4 miles west), Farnham (11 miles south-west), Egham (8 miles north-east) and Walton-on-Thames (11 miles east).
Local landmarks in Bisley
In Bisley, that means homes and buildings near Gordon's School, Bisley and West End Commons and The Crown pub. The closest station to Bisley is Brookwood station, about 1.6 miles south of the centre. Other landmarks nearby include The Peacocks (3.3 miles east) and The Museum of The National Rifle Association (1.4 miles south-west). The countryside around Bisley includes Brookwood Lye.
How the visit works
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours, depending on how many joints need doing and we leave things clean and tidy. A visit to Bisley is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we agree the joints to be done.
- We cut away the failed silicone.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
Getting ready for the visit
- Tell us if parking is tricky
- Plan for the work area to be out of bounds to pets and children
- Mention if the joints have been sealed before
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Related advice
Common problems we fix in Bisley
Silicone won’t bond to a dirty surface. Where the joint wasn’t cleaned and degreased the sealant may lift within a few years.
The problems people normally mention when they call include:
- Black or yellowed silicone on glass joints
- Leaks from the base of a shower screen
- Silicone pulling away from the glass
- Leaks where conservatory glass meets the frame
For site and facilities teams at buildings such as Bisley CofE Primary School, its window and door frames need their mastic kept sound, just like a home’s.
What your quote should include
- Whether all the old sealant comes out first
- How long to leave it before use
- Whether they’re fully insured
- What happens if the job turns out different
When it isn’t the sealant
We will always be straight with you, so here’s what new sealant will not do:
- Failed flashing around a conservatory
- Condensation trapped between two panes
- Structural problems with a conservatory roof
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Rooflights
- Glass-to-glass joints
- Shower screens
- Conservatory frames
- Glass-to-frame joints
- Glass balustrade bases