Hampshire · England
Glazing Silicone in Bedhampton
Glazing joints in Bedhampton need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Glass-to-glass joints that have split
- Stained, discoloured glazing silicone
- Water tracking down the inner face of the glass
What we cannot put right
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- Rotten or badly damaged frames
- A broken pane or roof panel
- Leaks from the roof covering or flashing (a roofer’s job)
If you’re not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer.
Where we work in Bedhampton
- Rooflights
- Glass balustrade bases
- Conservatory frames
- Glass-to-glass joints
- Glass-to-frame joints
- Shower screens
Glazing silicone for homes and businesses in Bedhampton
Conservatory leaks often start at a sealant joint, where glass meets frame or frame meets wall. We find the joint that is letting water in and renew it and tell you plainly if the cause is something else. If you’re dealing with leaking glazing joints on a rooflight and new silicone smeared over old sealant, we can put it right, on shower screens, glass balustrade bases and conservatory frames alike.
In smaller places like Bedhampton, homes range from older cottages to newer houses, with windows to match: timber, uPVC and aluminium. The right sealant depends on the frame and on what it sits in.
We stand behind the work with a one-year guarantee.
- Place
- Bedhampton (PO9)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What glazing silicone looks like in Bedhampton
Bedhampton is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Historic houses like Warblington Castle (about 1.7 miles south-east) are a reminder that the area around Bedhampton has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
Rented homes near Bedhampton station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows. If you look after a building such as Bidbury Junior School, the mastic around its windows and doors needs looking after like any other building’s. For an older house near a landmark such as St Nicholas Church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Bedhampton is about 1 mile south-west of Havant, in Hampshire. Anywhere in PO9, our applicators can take on glazing silicone. Our area takes in 683 places across Hampshire.
We work across the PO9 postcode area for glazing silicone and the streets around it. Whether your property is on Palk Road, Knox Road and Mill Lane or a nearby road, our applicators can take on the job. We also cover Farlington (1 mile south-west), Purbrook (2 miles north-west), Drayton (2 miles west), Widley (2 miles west) and Waterlooville (2 miles north-west). Further out, we also cover Gosport (7 miles south-west), Fareham (8 miles west), Horndean (4 miles north), Hedge End (14 miles west), Petersfield (11 miles north) and Locks Heath (12 miles west).
Near you in Bedhampton
Locally, jobs take us to homes and businesses close to Havant College and The Golden Lion pub and the streets around them. There’s a railway station in Bedhampton itself: Bedhampton station. Well-known places in the area include Warblington Castle (1.7 miles south-east) and Havant Museum (1.1 miles east). Green spaces nearby include Portsdown Hill and Southmoor Nature Reserve.
Why act early in Bedhampton
Topping up old silicone can look like a fix, but silicone doesn’t stick to silicone and water soon finds its way back. Cutting out and resealing properly lasts. In a smaller place like Bedhampton, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why choose Mr Mastic in Bedhampton
- Experience in homes, commercial sites and hotels
- Colour agreed with you before work begins
- An ARBOMaster approved applicator
- Fully insured
See what affects the cost and what customers say.
For landlords and businesses
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Letting agents and landlords in Bedhampton can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
A DIY attempt does not rule out a professional job. We cut it out and start again.
Also near Bedhampton
More services for Bedhampton
FAQs for Bedhampton
Is Bedhampton within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Does living near the coast affect glazing silicone in Bedhampton?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Do you seal glass balustrade bases?
Yes. The sealant joint at the base can be renewed. Fitting glass is a separate trade.
Do you do commercial work?
Yes. We can plan bigger jobs in stages.
Do you have insurance?
Yes, we are fully insured for domestic and commercial work.
Is there any odour?
There can be a smell while the sealant cures. Ventilation helps.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Is it enough to run a bead over the old sealant?
Topping up is a common cause of leaks. We remove the old silicone, clean the joint and reseal.
How it works
A visit follows a simple pattern: we check the joints, protect the area around them, do the work and tidy away. Most jobs take a few hours for most jobs. Parking around Bedhampton is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We start by finding the leak and making sure sealant is the cause.
- We cut out the failed silicone, taking care of the glass and frame.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- We apply a neutral-cure glazing silicone and tool it smooth.
- The finished joints are checked and, where it’s safe, tested with water.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about parking restrictions
- Clear the area around the work
Get a quote
For glazing silicone in Bedhampton, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you will get a clear quote before work begins.
Read more
Quotes for glazing silicone in Bedhampton
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Any working-time requirements on site
- How many areas need sealing
- Mould in or behind the old joints
- The size of the job
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Photos by email, if that is easy
- The rough size of the job
- The type of property
- Where the property is
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Use gentle products around the joints
- Keep scrapers and blades away from the silicone
- Squeegee the shower screen after each use
- Do not leave a drip for the next storm
On shower screens, wipe or squeegee after use and let the room air. That slows mould growth on the bead.
If silicone on glass has cracked, water is already getting in. Renewing it early keeps it simple compared with fixing water damage later.