Kent · England
Wierton Floor Joint Sealing
Floor joint sealing for Wierton, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Gaps between floors and kitchen plinths
- Rigid edge joints in tiled floors
- Skirting that has pulled away from the floor
The process
We keep the work tidy and contained to the joints we are treating, so you can carry on as normal. The job usually takes a few hours, depending on the length of joint, and we tell you how long to leave it before we go. For a village or hamlet like Wierton, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- The room is cleared along the joints so we can reach them.
- We take out the cracked caulk, grout or old sealant.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied and smooth it.
- We check the joints and explain the aftercare.
Preparing for the visit
- Clear items away from the joints we are working on
- Mention any parking rules near the property
- On commercial sites, let us know about site rules
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear quote.
Read more
About our floor joint sealing in Wierton
Gaps along the bottom of skirting are common in new and older homes alike. Caulk tends to crack there, so we use a flexible sealant that moves with the floor. If you’re dealing with open gaps along the bottom of skirting boards and open joints around bathroom floor edges, we can help, on wet room & bathroom floors, thresholds and skirting boards alike.
Work in a small place like Wierton just needs the journey and access planning, and the work itself is the same as on any site.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Wierton (ME17)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Different surfaces, different methods
Commercial floors
Commercial floors take more traffic than most homes. The sealant is chosen for the traffic the floor takes.
Concrete floor joints
Hard wheels break down the edges of open joints. Sealing them supports the edges and stops debris collecting.
Places near Wierton
What else we do in Wierton
Wierton questions
Can you help a landlord with a rental near Staplehurst station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.
Can you do floor joint sealing in Wierton?
Yes, Wierton is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we will give you a clear quote.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Can you use decorators’ caulk instead?
Only on dry joints that don’t move. Caulk cracks as the floor moves and the gap reopens. A flexible sealant lasts longer there.
My floor grout keeps cracking in a line. Can you help?
Normally, yes. A crack along a grout line often means the floor needs room to move. We rake out that line and seal it with flexible sealant.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
What floor joint sealing looks like in Wierton
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
If you look after a building such as Boughton Monchelsea Primary School, entrance and corridor floor joints take a lot of traffic. If you let a flat or house near Staplehurst station, open skirting and floor joints collect dirt and water, so seal them while the property is empty. Community buildings like Church of St Peter are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Wierton is about 3 miles south of Maidstone, in Kent. From the centre of Wierton to the outskirts, we cover floor joint sealing for every kind of property, from flats and houses to offices and hotels. Our area takes in 922 places across Kent. For nearby work, see our Crawley page (33 miles or so).
We cover every part of the ME17 postcode area for floor joint sealing and the streets around it. If you need floor joint sealing at a property on East Hall Hill and Wierton Hill or a nearby road, our applicators can take on the job. Other places close to Wierton include Chart Sutton (1 mile north-east), Boughton Monchelsea (1 mile north-west), Boughton Green (1 mile north-west), Park Wood (1 mile north) and Five Wents (2 miles east). We also work in nearby towns such as Maidstone (3 miles north), Ashford (15 miles east), Sittingbourne (12 miles north-east), Royal Tunbridge Wells (14 miles south-west), Tonbridge (12 miles west) and Kings Hill (7 miles north-west).
Near you in Wierton
Locally, jobs take us to homes and businesses close to Cornwallis Academy and The Cock Inn. For rail, the closest station is Staplehurst station, about 3.3 miles south of the centre. A little further out are Sutton Valence Castle (2 miles east) and The Mall Maidstone (3.9 miles north).
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Work for landlords, hotels and businesses
For anyone letting property in or around Wierton, several properties can be quoted together. Just tell us the addresses and what each one needs.
Housing providers, facilities teams and property managers book us too in Wierton and across Kent. We can quote a run of properties together.
What affects the cost of floor joint sealing
For a quick quote, just ask. What matters most is:
- The size of the job
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
What we need to know
When you contact us, these details help:
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
- Photos by email, if that’s easy
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
What we cannot put right
We won’t take on work that will not last, so here’s what sealant can’t put right:
- Structural movement or subsidence
- A tiled floor that needs relaying
- Subfloor problems that need a flooring contractor
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think.
Surfaces we seal
- Commercial floors
- Tiled floors
- Concrete floor joints
- Thresholds
- Skirting boards
- Wet room & bathroom floors
How to look after the new joints
After the cure time, these simple habits help:
- Keep floor cleaning water to a minimum at the edges
- Avoid caulk in bathrooms and kitchens
- Check skirting joints after the heating season
- Sweep along the edges of the floor
Lift furniture rather than sliding it over sealed joints. Dragging can tear the bead.
Once concrete joint edges start to break, wheels make it worse. Sealing them early protects the edges.