Hampshire · England
Floor & skirting joints in Wickham, Hampshire
Specialist floor joint sealing for Wickham: careful preparation, the right product and tidy work. Call for a quick quote.
- Open joints around bathroom floor edges
- Cracked grout where a tiled floor needs a movement joint
- Open joints that fill with dirt
Do you need floor joint sealing in Wickham?
Caulk is the usual filler for skirting. In a joint that moves or gets wet, it splits, which is why so many skirting joints look broken.
Look out for these signs:
- Caulk that has cracked where the floor moves
- Cracked grout where a tiled floor needs a movement joint
- Perimeter joints in tiled floors filled with grout
- Chipped and open joints in warehouse floors
For landlords with property near Fareham station, gaps at skirtings and thresholds are worth sealing between tenancies.
What to look for in a quote
- What preparation is included
- How long to leave it before use
- Whether the sealant suits the joint
- What the quote includes, VAT included or not
Floor joint sealing for homes and businesses in Wickham
Large tiled floors, and those over underfloor heating, often need movement joints. Where one is needed, we rake out the grout along the right line and replace it with flexible sealant coloured to suit the grout. Typical jobs include failed seals where bathroom floors meet baths and panels and tiled floors with no room to move, across skirting boards, commercial floors and tiled floors.
In smaller places like Wickham, new homes tend to come as small developments or single plots. The sealant around baths, showers, frames and skirtings needs to be right from the start.
All our work is covered by our one-year guarantee, wherever you are in Hampshire.
- Location
- Wickham (PO17)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Floor joint sealing in Wickham: local notes
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
Schools such as Wickham Church of England Primary School are buildings too, and entrance and corridor floor joints take a lot of traffic. For buildings such as Church of St Nicholas, joints in its floors, skirtings and thresholds need resealing as they wear.
Wickham is about 3 miles north of Fareham, in Hampshire. For floor joint sealing in and around Wickham, please ring 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Hampshire. Our area takes in 683 places across Hampshire. For nearby work, see our Portsmouth page, about 8 miles away.
Work in PO17 is quoted and booked the same way as anywhere else. That includes homes and businesses on The Square, Station Road and Bridge Street. Being close to the A32 and A334, Wickham is simple for us to get to. We also cover Shedfield (1 mile north-west), Shirrell Heath (2 miles north), Kingsmead (2 miles north-east), Woodend (2 miles north-east) and Mislingford (2 miles north). Within a short drive, we also cover Winchester (12 miles north-west), Gosport (7 miles south), Havant (9 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south) and Horndean (8 miles east).
What’s near Wickham
Around Wickham, our work takes us to homes and buildings near The Old House Hotel. The closest station to Wickham is Fareham station, about 3.2 miles south. Well-known places in the area include Fareham Shopping Centre (3.2 miles south) and Carron Row Farm Museum (3.5 miles south-west). Green spaces nearby include St Clair's Meadow and Portsdown Hill.
Nearby places to Wickham
More services for Wickham
How the job changes by surface
Thresholds
Thresholds between rooms meet two floors and often a door frame. A flexible sealant suits both floor finishes.
Concrete floor joints
Hard wheels break down the edges of open joints. A sealed joint protects the edges.
Why it’s worth doing now in Wickham
Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. Sealing them now is a short job. Around Wickham, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Doing several joints on one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
What you get with us
- Fully insured
- We agree the colour with you first
- Sanitary silicone with an anti-fungal additive in wet areas
- Rated 4.9 stars on Google
See our cost guide or what customers say.
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We also work for property managers and facilities teams in Wickham and across Hampshire. We can quote a run of properties together.
Common questions in Wickham
Will you come out to Wickham?
Yes. Wickham is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Wickham in your area for floor joint sealing?
Yes, Wickham is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
Are you insured?
Yes. We’re fully insured.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Can you match the sealant colour?
In most cases you can choose. We will explain which colours are available and agree one before any work starts.
How long does the job take?
A typical job takes a few hours for most rooms, longer for large commercial floors. We’ll confirm how long when we quote.
What affects the quote in Wickham
You will get a clear quote before work begins. It’s based on:
- The size of the job
- Mould in or behind the old joints
- Any working-time requirements on site
- The old material and how stubborn it is
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
What we need to know
Photos help, but a description is a good start. Please mention:
- Whether it has been sealed before
- The rough size of the job
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, ring 0345 464 0079 or drop us an email.
The process
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for most rooms, longer for large commercial floors. A visit to Wickham is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we check the joint and the floor and agree which sealant suits it.
- Old caulk, grout or sealant is removed from the joint.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Move anything stored near the joints
- Mention any tricky access
- Try not to wet indoor joints just before the visit
Get a quote
We quote each job on its own. Simply ring 0345 464 0079 or send us an email and describe the job.
Read more
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.