Slough · England
Floor Joint Sealing in Wexham Street
Floor joint sealing in Wexham Street from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Grout used at the floor edge instead of sealant
- Skirting that has pulled away from the floor
- Chipped and open joints in warehouse floors
Floor joint sealing for homes and businesses in Wexham Street
The gap under a skirting board often opens as floors and walls move with the seasons. Decorators’ caulk generally cracks where there’s movement, so we close it with a flexible sealant instead. If you have caulk that has cracked where the floor moves and failed seals where bathroom floors meet baths and panels, we can put it right, on wet room & bathroom floors, skirting boards and concrete floor joints alike.
Work in a small place like Wexham Street just needs the journey and access planning, and the work itself is the same as on any site.
Our work is backed for twelve months.
- Where
- Wexham Street (SL2, SL3)
- Region
- Slough
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Floor joint sealing in Wexham Street: local notes
Floors around Slough run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you let a flat or house near Slough station, open skirting and floor joints collect dirt and water, so seal them while the property is empty. For site and facilities teams at buildings such as Khalsa Secondary Academy, floor and threshold joints in busy corridors wear quickly and are best resealed early. Community buildings like St Andrew's Church Centre are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Wexham Street is about 2 miles north-east of Slough, in Slough. From the centre of Wexham Street to the outskirts, we cover floor joint sealing for every kind of property. Wexham Street is one of 31 places in Slough where we work. For nearby work, see our Reading page, about 19 miles away.
We cover every part of the SL2 and SL3 postcode area for floor joint sealing and the streets around it. Local streets include Larkings Lane, Hartley Close and Tubwell Road, and we cover them all. Neighbouring places we cover for floor joint sealing include Stoke Poges (1 mile west), Wexham Court (1 mile south), Fulmer (1 mile north-east), George Green (2 miles south-east) and Iver Heath (2 miles east). We also work in nearby towns such as Cippenham (3 miles south-west), Chalvey (3 miles south-west), Langley (3 miles south), Upton (3 miles south), Burnham (4 miles west) and Datchet (4 miles south).
Local landmarks in Wexham Street
Locally, jobs take us to homes and businesses close to The Plough Public House and The Stoke Poges School. Wexham Street’s nearest station is Slough station, about 2.3 miles south of the centre. Well-known places in the area include The Pavilions (4 miles east) and Windsor Castle (4.3 miles south). Not far away are Stoke Common.
Honest limits
To be straight with you, there are a few things sealant won’t fix:
- Water getting under the tiles from elsewhere
- Bouncy or failing floorboards
- Structural movement or subsidence
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Tiled floors
- Skirting boards
- Commercial floors
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
How it works
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a morning or an afternoon for most homes. In a small place like Wexham Street, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- We apply a flexible sealant suited to the floor.
- We check the joints and explain the aftercare.
Getting ready for the visit
- Keep children and pets away from the work area
- Let us know if you’ve seen damp or leaks
- Clear items away from the joints we are working on
Getting a quote
Want a quote for floor joint sealing? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Places near Wexham Street
Other services in Wexham Street
Why it’s worth doing now in Wexham Street
Open joints along wet floors let water into the subfloor and behind skirting. Sealing them now keeps the problem at the surface. Older cottages and farmhouses around Wexham Street can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why us?
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- Anti-fungal sanitary silicone in wet areas
- Colour picked to suit the job
Take a look at how sealant jobs are priced or customer reviews.
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Have a cracking tiled floor checked before tiles break
- Cone off fresh joints until they’re ready
- Sweep along the edges of the floor
- Keep caulk for dry, still joints only
Silicone sealant is not made to take paint. If you plan to paint, we’ll use a paintable product.
Small gaps are quick to seal. Ignored, they fill with dirt and open further.
How we quote for floor joint sealing
We don’t publish a price list. The quote depends on:
- How many areas need sealing
- The number and length of the joints
- The product the joint needs
- When we can work, for business premises
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
What we need to know
When you contact us, these details help:
- A few pictures by email, if you can
- What’s wrong with the joints now
- Whether it has been sealed before
- How many joints, rooms or windows are involved
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or drop us an email.
Wexham Street questions
Do you cover smaller places like Wexham Street?
Yes, Wexham Street is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you cover Wexham Street for floor joint sealing?
Yes. Our work covers London and the South East, and Wexham Street is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What does floor joint sealing cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
What causes gaps between the floor and skirting?
It’s normally the floor moving: timber drying in winter, floors settling, or caulk that can’t stretch. A flexible sealant stays closed as the floor moves.
Do you seal kitchen plinths to the floor?
Yes. Floor edges in bathrooms and kitchens get wet at every clean, so a flexible silicone is the right choice.
Are you fully insured?
Yes. We are fully insured.
Do you work on commercial floors?
Yes, including warehouses, units, shops and offices. We can plan around your opening times.
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Different surfaces, different methods
Wet room and bathroom floors
Wet room floors rely on sound joints at the walls. It’s resealed with a sanitary silicone and we’ll say if the problem looks like more than the joint.
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. Grout at the edge is removed and replaced with sealant.