Kent · England
Wanshurst Green Floor Joint Sealing
Problem with your floor joints in Wanshurst Green? We remove the old material, prepare the joints and seal them properly.
- Dirt and water collecting in open floor joints
- Rigid edge joints in tiled floors
- Open joints around bathroom floor edges
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Floor joint sealing in Wanshurst Green, done properly
Every floor moves a little, so its edges need a joint that can flex. Skirting-to-floor gaps, tiled floor joints and concrete joints are all sealed using a product that suits the floor. We are often asked to deal with grout used at the floor edge instead of sealant and cracked caulk along skirting in bathrooms and kitchens, on skirting boards, commercial floors and tiled floors.
Somewhere as small as Wanshurst Green, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.
Each job carries a 12-month guarantee, large or small.
- Where
- Wanshurst Green (TN12)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How the visit works
On the day, we look over the joints with you first. Surfaces next to the work are protected before work begins. Most jobs take a few hours, depending on the length of joint. Somewhere like Wanshurst Green needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- The joint is tooled neatly and the cure time explained.
Preparing for the visit
- On commercial sites, let us know about site rules
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
If you’re in Wanshurst Green and need floor joint sealing, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you will get a clear quote before we start.
Related advice
When it is not the sealant
New sealant can’t fix everything, and we’d rather say so up front. It will not solve:
- Leaks from a failed tanking system
- Movement too big for a sealant joint
- A tiled floor that needs relaying
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
What we seal
- Concrete floor joints
- Tiled floors
- Skirting boards
- Thresholds
- Commercial floors
- Wet room & bathroom floors
How the job changes by surface
Skirting boards
Skirting gaps are one of the most common floor joints we seal. We take out any cracked caulk before sealing so the new sealant bonds.
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. We rake out any grout there and reseal.
Why act early in Wanshurst Green
Not every floor joint takes the same sealant: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Getting that choice wrong is a common reason joints fail. Older cottages and farmhouses around Wanshurst Green can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why Wanshurst Green customers choose us
- 4.9 on Google from 180+ five-star reviews
- One-year guarantee on every job
- Tidy, careful work
- Colour picked to suit the job
Take a look at how sealant jobs are priced and what customers say.
Joints and finishes in Wanshurst Green homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
Letting a property close to Marden station? Then gaps at skirtings and thresholds are worth sealing between tenancies.
Wanshurst Green is about 6 miles south of Maidstone, in Kent. Anywhere in TN12, we can carry out floor joint sealing at your property. 922 places in Kent are on our list. Our Crawley page covers work nearby, about 31 miles away.
Every address in TN12 is within our area for floor joint sealing. Close by, we work in St Ann's Green (1 mile north), Milebush (1 mile north-west), Underling Green (1 mile north), Marden Thorn (1 mile south) and Cross-at-Hand (1 mile north-east). We also work in nearby towns such as Maidstone (6 miles north), Ashford (15 miles east), Sittingbourne (15 miles north-east), Royal Tunbridge Wells (11 miles west), Tonbridge (11 miles west) and Kings Hill (8 miles north-west).
Around Wanshurst Green
Wanshurst Green’s nearest station is Marden station, about 1.2 miles west. Well-known places in the area include South East Romany Museum (0.5 miles south-west) and Sutton Valence Castle (4.1 miles north-east).
Towns and villages near Wanshurst Green
Other services in Wanshurst Green
When to call us in Wanshurst Green
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. You’ll see a crack running along the grout, showing where a movement joint was needed.
The most common problems we see are:
- Failed joint filler in concrete floors
- Gaps at thresholds between rooms
- Tiled floors with no room to move
- Rigid edge joints in tiled floors
Community buildings like St Michael and All Angels Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
What to look for in a quote
- What the cure time is
- How hidden problems are handled
- What product goes in the joint
- Who turns up on the day
Questions from Wanshurst Green
Can you do floor joint sealing in Wanshurst Green?
Yes, Wanshurst Green is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Can you help a landlord with a rental near Marden station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Will I be able to paint over the new joint?
Where you plan to paint, we do. Silicone does not take paint so mention it when you get a quote.
How long does the job take?
As a guide, most jobs take a few hours, depending on the length of joint. Larger jobs naturally take longer, and we will say how long yours will take.
Do you seal warehouse floor joints?
Yes. Concrete floor joints in warehouses and units are part of our work. We will talk through the traffic and choose a sealant suited to it.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can you add a movement joint to a tiled floor?
Often, yes. A crack along a grout line often means the floor needs room to move. We rake out that line and seal it with flexible sealant.
Can I choose the sealant colour?
We’ll suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
What affects the quote in Wanshurst Green
The price is agreed before any work begins. It’s based on:
- How easy the joints are to reach
- The product the joint needs
- Any mould that needs treating
- The old material and how stubborn it is
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Helping us quote
When you contact us, it’s useful to know:
- Pictures of the joints, sent by email
- Where the property is
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll take it from there.