Surrey · England
Walton on the Hill Floor Joint Sealing
Professional floor joint sealing in and around Walton on the Hill, with every bit of old sealant taken out first and a 12-month guarantee.
- Perimeter joints in tiled floors filled with grout
- Open joints around bathroom floor edges
- Chipped and open joints in warehouse floors
Walton on the Hill: your questions answered
I let a flat near Tadworth station. Can you help?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Is Walton on the Hill within the area you cover?
Yes, Walton on the Hill is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
How do I get a quote for floor joint sealing in Walton on the Hill?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You will get a clear quote before we start.
Can grout be replaced with sealant on a tiled floor?
In many cases, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant. If tiles are loose, that needs fixing first.
Can I choose the sealant colour?
In most cases you can choose. We will explain which colours are available and agree one before work begins.
Can sealant along the skirting be painted?
On joints you want to paint, yes. Silicone in bathrooms and kitchens can’t be painted, so tell us your plans.
How we handle floor joint sealing in Walton on the Hill
In kitchens and bathrooms, the joint where the floor meets a bath panel, plinth or skirting takes mop water every day. We seal them with a flexible, water-resistant sealant so water and dirt cannot get in. Common call-outs are for open joints that fill with dirt and failed seals where bathroom floors meet baths and panels, on wet room & bathroom floors, commercial floors and skirting boards.
In a village or hamlet like Walton on the Hill, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
A one-year guarantee comes as standard.
- Where
- Walton on the Hill (KT20)
- Region
- Surrey
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
In fairness, some problems need a different trade:
- Water getting under the tiles from elsewhere
- Concrete repairs beyond the joint
- Large cracks that need a surveyor
If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
Where we work in Walton on the Hill
- Concrete floor joints
- Skirting boards
- Commercial floors
- Tiled floors
- Wet room & bathroom floors
- Thresholds
Why it’s worth doing now in Walton on the Hill
Filling a skirting gap with caulk looks fine at first, but the movement soon cracks it. A flexible sealant stretches instead and keeps the joint sealed. Older cottages and farmhouses around Walton on the Hill can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- Tidy, careful work
- 20+ years of sealant experience
- Colour picked to suit the job
- We agree the colour with you first
Read what affects the cost and customer reviews.
What affects the cost of floor joint sealing
Every job gets its own quote. These are the things that affect it:
- Any mould that needs treating
- How easy the joints are to reach
- The number and length of the joints
- When we can work, for business premises
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- The problem you’ve noticed
- Where the property is
- Access, such as stairs, a lift or height
- If someone has resealed it before
Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or email us and describe the job and send photos if you have them.
Floor joint sealing in Walton on the Hill: local notes
Floors around Surrey run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as Church of St Peter, joints in its floors, skirtings and thresholds need resealing as they wear. Rented homes near Tadworth station change hands often, and gaps at skirtings and thresholds are worth sealing between tenancies. Schools such as Walton-on-the-Hill Primary School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Walton on the Hill is about 3 miles south-east of Ashtead, in Surrey. Anywhere in KT20, we can carry out floor joint sealing at your property. Walton on the Hill is one of 395 places in Surrey we cover for floor joint sealing. Our Crawley page covers work nearby (12 miles or so).
Jobs for floor joint sealing in KT20 is quoted and booked the same way as anywhere else. We cover properties on Nursery Road, Deans Lane and Meadow Walk and the roads around them. Walton on the Hill sits on or near the B2220, which makes travel easy. Close by, we work in Tadworth (1 mile north-east), Lower Kingswood (1 mile east), Headley (2 miles west), Kingswood (2 miles north-east) and Mogador (2 miles south-east). We also work in nearby towns such as Guildford (14 miles west), Woking (14 miles west), Epsom (4 miles north), Horley (8 miles south-east), Redhill (4 miles south-east) and Ewell (5 miles north).
Near you in Walton on the Hill
Typical jobs here are in homes near Betchworth Quarry and Lime Kilns, Chinthurst School and The Bell pub, among other places. Walton on the Hill’s nearest station is Tadworth station, roughly 0.9 miles north-east. Well-known places in the area include Reigate Castle (3.3 miles south-east) and Headley Court (1.6 miles north-west). Open spaces near Walton on the Hill include Reigate Heath and Mercers Lake.
How the job changes by surface
Wet room and bathroom floors
Floor joints in bathrooms take water every day. We seal them with anti-fungal sanitary silicone that keeps water out.
Skirting boards
Skirting-to-floor joints are a regular job for us. We take out any cracked caulk before sealing so the new sealant bonds.
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Looking after it afterwards
So the new joints stay in good condition:
- Check skirting joints after the heating season
- Ask before painting over a sealed joint
- Mark off resealed joints in warehouses
- Use a well-wrung mop rather than flooding the floor
Do not paint over silicone. If you plan to paint, we’ll use a paintable product.
In wet areas, an open floor joint lets water reach the subfloor. Resealing early keeps it out.
What we do, step by step
Every visit runs the same way: we check the joints, protect the area around them, do the work and clear up. Most jobs take a morning or an afternoon for most homes. In a small place like Walton on the Hill, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at the gap and the floor type and agree the right sealant.
- We take out any old caulk, sealant or grout along the line.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
Preparing for the visit
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- Mention any sign-in or site rules at work premises
Getting a quote
Need a quote? Please ring 0345 464 0079 or drop us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.