Kent · England
Floor Joint Sealing in Waltham
Floor joints in Waltham need attention? We remove the old material, prepare the joints and seal them properly.
- Open joints that fill with dirt
- Skirting caulk that keeps splitting
- Rigid edge joints in tiled floors
What sealant work cannot fix
We’d rather tell you now than do work that won’t last, so these are the limits:
- Concrete repairs beyond the joint
- A tiled floor that needs relaying
- Bouncy or failing floorboards
If in doubt, ring 0345 464 0079 or email us and we will say what we think.
What we seal
- Skirting boards
- Commercial floors
- Tiled floors
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
Floor joint sealing in Waltham
We seal floor joints in homes, offices and commercial buildings across Waltham. Each job starts with looking at the floor and the gap, since that decides which sealant suits. If you have open gaps along the bottom of skirting boards and rigid edge joints in tiled floors, we can put it right, whatever the surface.
In a village or hamlet like Waltham, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Waltham (CT4)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How it works
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take a few hours for most rooms, longer for large commercial floors. For a village or hamlet like Waltham, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We clear the edges of the floor so the joints are easy to reach.
- We take out the cracked caulk, grout or old sealant.
- Edges are cleaned and dried.
- We apply a flexible sealant suited to the floor.
- Finally, we check the work and talk you through aftercare.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Let us know if you’ve seen damp or leaks
- Tell us if parking is tricky
Ask for a quote
We do not publish a price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Read more
How we quote for floor joint sealing
For a quick quote, just ask. What matters most is:
- How many areas need sealing
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
- The size of the job
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
What to tell us for a quote
To make quoting easier, let us know:
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
Towns and villages near Waltham
Also in Waltham
Joints and finishes in Waltham homes
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
For landlords with property near Chilham station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Waltham is about 6 miles south-west of Canterbury, in Kent. Every kind of property in Waltham is covered for floor joint sealing. Every job comes with our one-year guarantee. Waltham is one of 922 towns and villages in Kent we cover for floor joint sealing. Chelmsford is on our list too, about 44 miles from Waltham.
Our applicators cover all of CT4 for floor joint sealing and the streets around it. Local streets include Church Lane, Richdore Road and Kake Street. Other places close to Waltham include Stelling Minnis (2 miles east), Bossingham (2 miles east), Stowting Common (4 miles south), Stowting (4 miles south) and Rhodes Minnis (4 miles south-east). Further out, we also cover Ashford (8 miles south-west), Canterbury (6 miles north-east), Dover (13 miles east), Folkestone (10 miles south-east), Whitstable (11 miles north) and Faversham (10 miles north-west).
Near you in Waltham
Typical jobs here are in homes near Compasses Inn, among other places. The closest station to Waltham is Chilham station, about 3.7 miles north-west. A little further out are Chilham Castle (4.1 miles north-west) and Kent and Canterbury Hospital (5.5 miles north-east).
Landlord and commercial work in Waltham
Housing providers, facilities teams and property managers book us too in Waltham and across Kent. Several sites can go on one quote, and we’re fully insured.
For anyone letting property in or around Waltham, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
Signs you need floor joint sealing in Waltham
Water and dirt collect in open floor joints. In wet areas, water runs into the gap at every clean.
Most people get in touch when they notice something like this:
- Chipped and open joints in warehouse floors
- Grout used at the floor edge instead of sealant
- Cracked caulk along skirting in bathrooms and kitchens
- Open joints that fill with dirt
Community buildings like Church of St Bartholomew are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Before you book anyone
- How the surfaces are prepared before sealing
- What happens if the job turns out different
- What insurance they hold
- Is VAT in the price?
How the job changes by surface
Skirting boards
On painted skirting, we can use a flexible sealant that takes paint. Where water is involved, silicone is the better choice.
Commercial floors
In commercial buildings, we can plan floor joint work around opening hours. We can arrange out-of-hours work where it’s needed.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Your questions about floor joint sealing in Waltham
Can you do floor joint sealing in Waltham?
Yes, Waltham is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Can you help a landlord with a rental near Chilham station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Will I be able to paint over the new joint?
For painted skirting, we use a flexible product that can be painted. Silicone is not made to be painted, so we use it where the joint stays unpainted.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Where are you based?
We work from Crawley. We cover Waltham and the rest of Kent.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first.