Hampshire · England
Floor Joint Sealing in Townsend
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Townsend, backed by a one-year guarantee. Call for a quick quote.
- Failed joint filler in concrete floors
- Tiled floors with no room to move
- Rigid edge joints in tiled floors
Floor joint sealing in Townsend, done properly
Tiled floors can crack along the grout when there’s no room for movement. We can turn a line of grout into a movement joint by replacing it with flexible sealant. Common call-outs are for gaps between floors and kitchen plinths and skirting that has pulled away from the floor, on commercial floors, concrete floor joints and skirting boards.
Work in a small place like Townsend just needs the journey and access planning, and the work itself is the same as on any site.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or send us an email.
- Location
- Townsend (RG26)
- Region
- Hampshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Get cracks along tile grout lines looked at early
- Ask before painting over a sealed joint
- Do not slide heavy items over sealed joints
- Keep floor cleaning water to a minimum at the edges
Lift furniture rather than sliding it over sealed joints. Sharp edges can cut the sealant before it has fully cured.
In wet areas, an open floor joint lets water reach the subfloor. Resealing early keeps it out.
What happens on the day
We keep the work tidy and contained to the area we’re working on, so you can carry on as normal. The job normally takes a few hours for most rooms, longer for large commercial floors, and we tell you how long to leave it before we go. Somewhere like Townsend needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Tell us about any water getting in
- Tell us if parking is tricky
- On commercial sites, let us know about site rules
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Read more
Work for landlords, hotels and businesses
If you manage several properties in or around Townsend, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What affects the cost of floor joint sealing
Your quote is based on your job. We look at:
- Access and height
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
- Any working-time requirements on site
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Asking for a quote
What to tell us when you ask for a quote:
- Roughly how big the job is
- The type of property
- Any access issues, like height or stairs
- Where the job is, and your postcode
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand.
Places near Townsend
What else we do in Townsend
Joints and finishes in Townsend homes
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That’s why the skirting and threshold joints need a flexible seal.
Letting a property close to Midgham station? Then a tidy floor and skirting joint helps a rental look ready for the next tenant. If you look after a church, hall or community building such as Church of St Catherine, joints in its floors, skirtings and thresholds need resealing as they wear. For site and facilities teams at buildings such as The Hurst School, floor and threshold joints in busy corridors wear quickly and are best resealed early.
Townsend is about 3 miles south-west of Tadley, in Hampshire. For floor joint sealing in and around Townsend, please call 0345 464 0079 or send us an email for a quick quote. We cover Hampshire from our Crawley base. Across Hampshire, we cover 683 places, and Townsend is one of them. You can also see our page for Reading, roughly 13 miles from Townsend.
Work in RG26 is quoted and booked the same way as anywhere else. We also cover Wolverton Common (1 mile north), Axmansford (2 miles north), West Heath (2 miles east), Ramsdell (2 miles south-east) and Baughurst (2 miles north-east). We also work in nearby towns such as Basingstoke (6 miles south-east), Andover (15 miles south-west), Alton (15 miles south-east), Tadley (3 miles north-east), Hook (11 miles east) and Popley (5 miles south-east).
What’s near Townsend
Locally, jobs take us to homes and businesses close to The George And Dragon Public House and the streets around them. For rail, the closest station is Midgham station, roughly 4.9 miles north. Nearby you will also find Park Prewett Hospital (4.5 miles south-east).
Common questions in Townsend
Is Townsend in your area for floor joint sealing?
Yes, Townsend is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
I let a flat near Midgham station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.
What does floor joint sealing cost?
It depends on the job, so we quote each one individually. To get one, phone 0345 464 0079 or send us an email with a short description of the job.
Why has a gap opened under my skirting?
Floors shrink and settle, especially in the first year or two and through the heating season. Rigid fillers split, so we use a flexible sealant.
Do you have insurance?
Yes, we’re fully insured for domestic and commercial work.
Is caulk good enough for skirting?
Because caulk cracks where there’s movement or water. Skirting joints move with the floor, so we use a flexible sealant that stretches.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours, depending on the length of joint. We’ll give you a better idea when we quote.
When something else is needed
It helps to know what we can’t do:
- Cracked or broken concrete slabs
- Subfloor problems that need a flooring contractor
- Water getting under the tiles from elsewhere
If you are not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Thresholds
- Concrete floor joints
- Skirting boards
- Wet room & bathroom floors
- Tiled floors
- Commercial floors
How the job changes by surface
Tiled floors
The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. We rake out any grout there and reseal.
Thresholds
Threshold joints get a lot of feet, so we choose a hard-wearing, flexible product.