Reading · England
Tokers Green Floor Joint Sealing
Problem with your floor joints in Tokers Green? We remove the old material, prepare the joints and seal them properly.
- Open joints that fill with dirt
- Failed seals where bathroom floors meet baths and panels
- Grout used at the floor edge instead of sealant
Why act early in Tokers Green
Dirt builds up in open joints, and they look untidy. A neat sealed joint is easier to clean. In a small place like Tokers Green, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Why choose Mr Mastic in Tokers Green
- 20+ years of sealant experience
- 180+ five-star Google reviews
- Fully insured
- Experience in homes, commercial sites and hotels
Floor joint sealing in Tokers Green, done properly
Concrete floors in warehouses and units have joints that take heavy wear. We reseal them with a product chosen for the movement and the traffic. If you’re dealing with cracked caulk along skirting in bathrooms and kitchens and open joints that fill with dirt, we can help, on concrete floor joints, wet room & bathroom floors and commercial floors alike.
Older homes in small places like Tokers Green often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or drop us an email.
- Location
- Tokers Green (RG4)
- Region
- Reading
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Floor joint sealing in Tokers Green: local notes
Across Reading, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
Community buildings like Church of St John the Baptist are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. Schools such as Kidmore End Church of England Primary School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early. For landlords with property near Tilehurst station, gaps at skirtings and thresholds are worth sealing between tenancies.
Tokers Green is about 2 miles north-west of Caversham, in Reading. Across the RG4 area, we can carry out floor joint sealing at your property. Tokers Green is one of 34 towns and villages in Reading where we work for floor joint sealing.
All of RG4 is covered for floor joint sealing, from the main roads to the quietest streets. That includes homes and businesses on Tokers Green Lane, Dysonswood Lane and Bardolph's Close and the roads around them. We also cover the places around Tokers Green: Chalkhouse Green (1 mile north-east), Caversham Heights (1 mile south), Emmer Green (1 mile south-east), Caversham (2 miles south-east) and Caversham Park Village (2 miles east). Larger places within reach include Norcot (3 miles south-west), West Reading (3 miles south), Tilehurst Within (3 miles south-west), Shinfield (6 miles south), Arborfield Garrison (9 miles south-east) and Horncastle (4 miles south-west).
Landmarks near Tokers Green
In Tokers Green, that means homes and buildings near Highdown School and Sixth Form Centre, The Pack Saddle pub and The Warwick School. The closest station to Tokers Green is Tilehurst station, roughly 2.2 miles south-west of the centre. Well-known places in the area include Broad Street Mall (2.8 miles south) and Royal Berkshire Regiment Museum (2.5 miles south). The countryside around Tokers Green includes South Lake and Fobney Island Wetland Reserve.
What sealant work cannot fix
We will not take on work that won’t last, so here’s what sealant can’t put right:
- Concrete repairs beyond the joint
- A tiled floor that needs relaying
- Bouncy or failing floorboards
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Skirting boards
- Thresholds
- Commercial floors
- Wet room & bathroom floors
- Tiled floors
- Concrete floor joints
Landlord and commercial work in Tokers Green
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Your questions about floor joint sealing in Tokers Green
I let a flat near Tilehurst station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
Will you come out to Tokers Green?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
When can I walk on the floor?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish so you can plan.
Will the old sealant be removed?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Can I choose the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before we start.
Can grout be replaced with sealant on a tiled floor?
Often, yes, where it suits the floor. The grout is raked out and replaced with a flexible sealant in a colour to suit, giving the floor room to move.
Is it messy?
We keep the work tidy. We protect what’s around the joints.
Do you seal warehouse floor joints?
Yes, from warehouses and units to offices and shops. We can plan around your opening times.
What affects the cost of floor joint sealing
Call for a quick quote. The main things that affect it are:
- Access and height
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- How many rooms, windows or areas are involved
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Any previous sealing or DIY work
- The problem you’ve noticed
- Whether it’s a home or a business
- Where the property is
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or email us.
What the job involves on each surface
Thresholds
Where a tiled floor meets timber or carpet, the joint takes movement from both sides. We bridge them with a flexible bead.
Concrete floor joints
Old filler, dust and debris are cleaned out of the joint first. We fit backing where needed.
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. Once we’ve agreed what’s being done, we protect the area and start. Most jobs take a few hours, depending on the length of joint. For a village or hamlet like Tokers Green, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
How to prepare
- For business premises, tell us about site rules or sign-in
- Keep pets and children clear of the area while we work
- Let us know about parking restrictions
Ask for a quote
We do not publish a price list. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.