Kent · England
Floor & skirting joints in Mount Pleasant, Kent
Floor joint sealing for Mount Pleasant, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Concrete floor joints that have broken down
- Gaps between floors and kitchen plinths
- Gaps at thresholds between rooms
How it works
On the day, we start by going over the job with you, so there are no surprises. We protect the surfaces around the joints before any work begins. The work normally takes a few hours, depending on the length of joint. Somewhere like Mount Pleasant needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gap and the floor type and agree the right sealant.
- We take out any old caulk, sealant or grout along the line.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Tell us about any water getting in
- Move anything stored near the joints
- Let us know about earlier repairs to the joints
Get a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.
Related advice
How we handle floor joint sealing in Mount Pleasant
We seal floor joints in homes, offices and commercial buildings across Mount Pleasant. We start by checking the floor type and the joint, because the right sealant depends on both. If you’re dealing with rigid edge joints in tiled floors and worn sealant at door thresholds, we can help.
Somewhere as small as Mount Pleasant, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.
You get a 12-month guarantee, the same in Mount Pleasant as everywhere else we work.
- Location
- Mount Pleasant (CT12)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Also near Mount Pleasant
What else we do in Mount Pleasant
When it is not the sealant
To be straight with you, some problems need a different trade:
- Damaged concrete that needs breaking out and repairing
- Bouncy or failing floorboards
- Structural movement or subsidence
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before booking.
Joints and surfaces we work on
- Thresholds
- Wet room & bathroom floors
- Commercial floors
- Tiled floors
- Skirting boards
- Concrete floor joints
New homes and floors in Mount Pleasant
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal.
Schools such as Minster Church of England Primary School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. For landlords with property near Minster station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Mount Pleasant is about 4 miles south-west of Margate, in Kent. Homes, rented property, offices and hotels in Mount Pleasant is covered for floor joint sealing. The work is guaranteed for a year. Across Kent, we cover 922 places, and Mount Pleasant is one of them. We also work in Chelmsford, about 45 miles from Mount Pleasant.
All of CT12 is within our area for floor joint sealing. We also cover Way (1 mile south-east), Acol (1 mile north), Minster (1 mile south-west), Sevenscore (2 miles south-east) and Manston (2 miles east). Larger places within reach include Canterbury (11 miles south-west), Margate (4 miles north-east), Dover (14 miles south), Ramsgate (4 miles east), Broadstairs (5 miles east) and Whitstable (12 miles west).
Near you in Mount Pleasant
We work in homes and buildings around King Ethelbert School and The Bell Inn and the streets around them. For rail, the closest station is Minster station, about 1.1 miles south. Nearby you’ll also find Westwood Cross (3.5 miles east) and RAF Manston History Museum (1.4 miles east). The countryside around Mount Pleasant includes Sandwich and Pegwell Bay.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Common problems we fix in Mount Pleasant
Water and dirt collect in open floor joints. In wet areas, water runs into the gap at every clean and behind skirting and plinths.
Any of these means the joints need attention:
- Tiled floors with no room to move
- Perimeter joints in tiled floors filled with grout
- Open joints that fill with dirt
- Gaps at thresholds between rooms
If you look after a church, hall or community building such as St Mildreds Church, floor and skirting joints in halls and kitchens wear like any others.
Comparing quotes
- What the cure time is
- Is the old sealant removed completely?
- Whether they’re fully insured
- Which sealant they’ll use, and why
Landlords, agents and businesses in Mount Pleasant
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured.
How we quote for floor joint sealing
You will get a clear quote before any work starts. It’s based on:
- Access and height
- The old material and how stubborn it is
- The product the joint needs
- Any mould that needs treating
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start.
Helping us quote
What to tell us when you ask for a quote:
- Photos by email, if that is easy
- If it’s domestic, commercial or a hotel
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it has been sealed before
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Mount Pleasant: your questions answered
I let a flat near Minster station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover Mount Pleasant for floor joint sealing?
Yes. We work across London and the South East, and Mount Pleasant is part of that. You can phone 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear price.
Can you use decorators’ caulk instead?
Caulk is fine for dry joints that don’t move, but it splits where the joint moves or gets wet. For most floor joints, we use a flexible sealant.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Will I be able to paint over the new joint?
On joints you want to paint, yes. Silicone in bathrooms and kitchens can’t be painted, so tell us your plans.
How do I get a quote for floor joint sealing in Mount Pleasant?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or send us an email and tell us what needs doing and where.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done.
What the job involves on each surface
Commercial floors
Commercial floors take more traffic than most homes. We talk through the traffic and choose a sealant suited to it.
Skirting boards
Skirting-to-floor joints are a regular job for us. We take out any cracked caulk before sealing so the new sealant bonds.