Perth and Kinross · Scotland
Kinnesswood Floor Joint Sealing
Floor joint sealing across Kinnesswood and nearby, with old sealant always removed completely and a 12-month guarantee.
- Open joints that fill with dirt
- Skirting that has pulled away from the floor
- Chipped and open joints in warehouse floors
How it works
On the day, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. The work normally takes a few hours for most rooms, longer for large commercial floors. In smaller Scottish places, parking is usually less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- We look at the gap and the floor type and agree the right sealant.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
If you’re in Kinnesswood and need floor joint sealing, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Advice
About our floor joint sealing in Kinnesswood
Floor joint sealing is mostly about choosing the right product and preparing the joint. We remove what’s there first, then clean, back and seal the joint. We work on concrete floor joints, tiled floors and thresholds, and people most often call us about threshold joints that have opened or worn and skirting that has pulled away from the floor.
Many newer homes in Scotland are timber-framed and settle as they dry out, which shows as gaps at skirtings and floor joints. In older homes, timber floors move through the year too.
All our work is covered by our 12-month guarantee, wherever you are in Perth and Kinross.
- Where
- Kinnesswood (KY13)
- Region
- Perth and Kinross
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
For landlords and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
Do you need floor joint sealing in Kinnesswood?
A floor laid tight to the walls has no room to move. As it expands, the edges lift or crack, and the sealant or grout breaks.
Most people get in touch when they notice one of these:
- Tiled floors with no room to move
- Gaps at thresholds between rooms
- Concrete floor joints that have broken down
- Gaps opening between the floor and skirting
For buildings such as Easter Balgedie church, joints in its floors, skirtings and thresholds need resealing as they wear.
Before you book anyone
- What product goes in the joint
- Who turns up on the day
- How the surfaces are prepared before sealing
- What the quote includes, VAT included or not
Places near Kinnesswood
Also in Kinnesswood
Joints and finishes in Kinnesswood homes
Across Perth and Kinross, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
Around Kinnesswood, as everywhere, floor joint sealing is only as good as the preparation behind it.
Kinnesswood is about 6 miles west of Glenrothes, in Perth and Kinross. Homes, rented property, offices and hotels in Kinnesswood can book us for floor joint sealing. The work is guaranteed for a year. Across Perth and Kinross, we cover 107 places, Kinnesswood among them. Edinburgh is on our list too, around 19 miles away.
Every address in KY13 is covered for floor joint sealing. Whether your property is on Main Street, The Cobbles and Back Dykes Road or a nearby road, our applicators can take on the job. Close by, we work in Scotlandwell (1 mile south-east), Wester Balgedie (1 mile north-west), Glenlomond (1 mile north-west), Ballingry (3 miles south) and Milnathort (4 miles west). Within a short drive, we also cover Perth (14 miles north), Kinross (4 miles west), Letham (14 miles north-west), Scone (15 miles north), Tulloch (15 miles north) and Oakbank (13 miles north-west).
Local landmarks in Kinnesswood
Other landmarks nearby include Loch Leven Castle (2.5 miles west) and Glenrothes Hospital (5.7 miles east). Not far away are Loch Leven National Nature Reserve and West Lomond.
Looking after it afterwards
Aftercare is simple:
- Use a well-wrung mop rather than flooding the floor
- Get cracks along tile grout lines looked at early
- Keep heavy wheels off new concrete joints until cured
- Avoid caulk in bathrooms and kitchens
Avoid flooding the floor when you clean. Less water at the edges helps the joints last.
Concrete joints damaged by traffic get worse quickly. Early resealing helps keep the joint intact and the floor safer.
Leave it or put it right?
Not every floor joint takes the same sealant: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. In a place like Kinnesswood, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
Leaving a failed joint generally makes the job bigger, not smaller. If you are not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
What you get with us
- We leave the area clean and tidy
- Rated 4.9 stars on Google
- One-year guarantee on every job
- Colour picked to suit the job
Kinnesswood questions
Is Kinnesswood in your area for floor joint sealing?
Yes. We work across all of Scotland, and Kinnesswood is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Will you come out to Kinnesswood?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
How do I get a quote for floor joint sealing in Kinnesswood?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Should I try it myself first?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
How the job changes by surface
Commercial floors
Shops, offices, warehouses and units all have floor joints that need sealing. The sealant is chosen for the traffic the floor takes.
Concrete floor joints
Open concrete joints chip at the edges when wheels cross them. Sealing them supports the edges.