Hampshire · England
Floor & skirting joints in Harestock, Hampshire
Floor joint sealing for Harestock and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Open joints that fill with dirt
- Gaps at thresholds between rooms
- Failed joint filler in concrete floors
Landlord and commercial work in Harestock
Landlords and agents in Harestock can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
Floor joint sealing for homes and businesses in Harestock
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors so the joint stays neat. We’re often asked to deal with floor edges that trap water and grime and grout used at the floor edge instead of sealant, on concrete floor joints, tiled floors and commercial floors.
In smaller places like Harestock, new homes tend to come as small developments or single plots. Each still needs its sealant and floor joints finished properly from day one.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or drop us an email.
- Location
- Harestock (SO22)
- Region
- Hampshire
- Guarantee
- One year on every job
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What floor joint sealing looks like in Harestock
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Managing a site like Harestock Primary School? Then floor and threshold joints in busy corridors wear quickly and are best resealed early. If you let a flat or house near Winchester station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Harestock is about 2 miles north-west of Winchester, in Hampshire. Jobs in Harestock get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Hampshire, we cover 683 places, Harestock among them. Our Southampton page covers work nearby, about 12 miles away.
Here we cover the SO22 postcode area for floor joint sealing. We cover properties on Kennel Lane, Burley Road and Stoney Lane and the roads around them. If you’re just outside Harestock, we cover Littleton (1 mile north-west), Weeke (1 mile south), Abbotts Barton (1 mile south-east), Hyde (1 mile south-east) and Headbourne Worthy (1 mile north-east). Further out, we also cover Eastleigh (8 miles south), Andover (11 miles north-west), Totton (14 miles south-west), Chandler's Ford (7 miles south), Hedge End (12 miles south) and Romsey (9 miles south-west).
What’s near Harestock
Locally, jobs take us to homes and businesses close to Henry Beaufort School and The Running Horse pub. The closest station to Harestock is Winchester station, about 1.2 miles south-east of the centre. A little further out are Royal Observer Corps Museum (1.1 miles south-east) and Royal Hampshire County Hospital (1.5 miles south). Not far away are Twyford Down and Winnall Moors.
Your questions about floor joint sealing in Harestock
Do you cover Harestock for floor joint sealing?
Yes. We work across London and the South East, and Harestock is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear price.
Do you work for landlords with property near Winchester station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
How do I get a quote for floor joint sealing in Harestock?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or email us and let us know what needs doing and where.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Why does the gap under my skirting keep coming back?
Usually it’s movement: timber drying in winter, floors settling, or caulk that can’t stretch. A flexible bead keeps up with the movement.
How soon can the floor be mopped?
You’ll get the times before we go. That depends on the product, and walking on it generally comes before mopping or wheeled traffic.
How the job changes by surface
Skirting boards
Skirting-to-floor joints are a regular job for us. We take out any cracked caulk before sealing so the bead sits on a clean surface.
Wet room and bathroom floors
Bathroom floor edges get wet at every clean. A flexible seal stops water running into the gap.
Leave it or put it right?
Floor joints left open collect dirt that is hard to clean out, and they look untidy. A neat sealed joint is easier to clean. In an older home around Harestock, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- More than 20 years in sealant work
- Neat joints and a tidy finish
- Anti-fungal silicone where joints get wet
- ARBOMaster approved applicator
Read how sealant jobs are priced and customer reviews.
What sealant work cannot fix
Some problems need a builder, plumber or other trade rather than us:
- Water getting under the tiles from elsewhere
- A tiled floor that needs relaying
- Cracked or broken concrete slabs
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before booking.
Where we work in Harestock
- Concrete floor joints
- Thresholds
- Wet room & bathroom floors
- Commercial floors
- Tiled floors
- Skirting boards
Common problems we fix in Harestock
When a tiled floor has no movement joints, the grout takes the strain. Cracks often run straight along a line of joints, where a flexible joint should have been.
Most people get in touch when they notice something like this:
- Gaps between floors and kitchen plinths
- Failed joint filler in concrete floors
- Grout used at the floor edge instead of sealant
- Floor edges that trap water and grime
For buildings such as Saint Barnabas, joints in its floors, skirtings and thresholds need resealing as they wear.
Before you book anyone
- Whether they seal over old material or remove it
- How much experience the applicator has
- What guarantee comes with the work
- Which colour the sealant will be
How it works
The work is kept neat and contained to the area we are working on. The job usually takes a morning or an afternoon for most homes, and we explain the cure time before we leave. Parking around Harestock is usually easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
Want a quote for floor joint sealing? Please phone 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear price before work begins.
Advice
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.