Hampshire · England
Floor & skirting joints in Foxcotte, Hampshire
Our applicators work in Foxcotte on sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Gaps between floors and kitchen plinths
- Cracked caulk along skirting in bathrooms and kitchens
- Threshold joints that have opened or worn
Foxcotte: your questions answered
Can you help a landlord with a rental near Andover station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover Foxcotte for floor joint sealing?
Yes, Foxcotte is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Do you seal floor joints in bathrooms and kitchens?
Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone to keep mop water out.
Can I add another job to the visit?
Of course. Doing several areas at once is normally more efficient.
What causes gaps between the floor and skirting?
Timber floors and skirting shrink and swell through the year. A flexible sealant closes the gap without cracking like caulk.
Is there any odour?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Do you seal warehouse floor joints?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Let us know about the traffic.
About our floor joint sealing in Foxcotte
Every floor moves a little, so its edges need a joint that can flex. We seal skirting gaps, tiled floor movement joints and concrete floor joints using a product that suits the floor. If you have chipped and open joints in warehouse floors and gaps between floors and kitchen plinths, we can help, whatever the surface.
For a small place like Foxcotte, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
All our work is covered by a one-year guarantee, wherever you are in Hampshire.

- Where
- Foxcotte (SP10)
- Region
- Hampshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
New homes and floors in Foxcotte
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
For site and facilities teams at buildings such as Harrow Way Community School, entrance and corridor floor joints take a lot of traffic. If you look after a church, hall or community building such as St Thomas, joints in its floors, skirtings and thresholds need resealing as they wear.
Foxcotte is about 2 miles north-west of Andover, in Hampshire. Anywhere in SP10, we cover floor joint sealing for homes and businesses. 683 places in Hampshire are on our list. We also work in Southampton, about 22 miles from Foxcotte.
Here we cover the SP10 postcode area for floor joint sealing. Neighbouring places we cover for floor joint sealing include Charlton (1 mile south-east), Penton Mewsey (1 mile west), Penton Grafton (1 mile west), Penton Corner (1 mile south-west) and Hatherden (2 miles north). Within a short drive, we also cover Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (7 miles west), Weeke (13 miles south-east), Stanmore (14 miles south-east) and Ludgershall (5 miles west).
Around Foxcotte
We work in homes and buildings around Portway Infant School and White Hart Public House and the streets around them. The nearest railway station is Andover station, roughly 1.2 miles south-east. A little further out are Andover Museum (1.7 miles south-east) and Andover War Memorial Hospital (0.9 miles south-east). Open spaces near Foxcotte include Mill Lake and Anton Lakes.
Signs you need floor joint sealing in Foxcotte
New floors settle once they’re in use. Gaps at the edges appear in the first year or so.
The most common problems we see are:
- Chipped and open joints in warehouse floors
- Perimeter joints in tiled floors filled with grout
- Threshold joints that have opened or worn
- Cracked grout where a tiled floor needs a movement joint
Rented homes near Andover station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Questions to ask before you book
- Whether you can choose the colour
- Who turns up on the day
- Are they insured?
- What happens if they find a problem under the old sealant
What affects the quote in Foxcotte
Call for a quick quote. What matters most is:
- How much there is to do
- Access and height
- Any working-time requirements on site
- Whether there’s mould to deal with
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
What to tell us when you ask for a quote:
- What’s wrong with the joints now
- Roughly how big the job is
- The type of property
- Where the job is, and your postcode
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work.
Aftercare tips
After the cure time, these simple habits help:
- Check the sealant is paintable before decorating
- Mark off resealed joints in warehouses
- Walk round the room once a year and look at the edges
- Vacuum floor joints regularly to stop grit building up
Keep off the joint for the time we give you. Feet are generally fine before mopping or wheeled traffic, and we’ll tell you both.
In wet areas, an open floor joint lets water reach the subfloor. A sound seal stops that happening.
Towns and villages near Foxcotte
What else we do in Foxcotte
When it is not the sealant
Sealant is not the answer to every problem, and we will tell you before work begins. Sealant will not put right:
- Loose, hollow or cracked tiles, which need a tiler
- Movement too big for a sealant joint
- Cracked or broken concrete slabs
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Foxcotte
- Skirting boards
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
- Tiled floors
- Commercial floors
Why deal with it now?
Not every floor joint takes the same sealant: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Using the wrong one is why many floor joints fail. Older cottages and farmhouses around Foxcotte can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why us?
- Colour picked to suit the job
- Arbo and Everbuild products
- White, clear, grey or coloured to suit, where the product allows
- Every job guaranteed for a year
Take a look at our cost guide or customer reviews.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
How the visit works
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours for most rooms, longer for large commercial floors, and the area is left clean. In a small place like Foxcotte, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- We apply a flexible sealant suited to the floor.
- We check the joints and explain the aftercare.
Before we arrive
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where. Photos by email help us understand the job.
