Hampshire · England

Floor Joint Sealing in Forestside

Floor joint sealing in Forestside from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Cracked caulk along skirting in bathrooms and kitchens
  • Gaps between floors and kitchen plinths
  • Chipped and open joints in warehouse floors

Book floor joint sealing in Forestside

Floor joint sealing for homes and businesses in Forestside

Across Forestside, we seal floor and skirting joints in homes and businesses. Each job starts with looking at the floor and the gap, since that decides which sealant suits. Common call-outs are for skirting caulk that keeps splitting and rigid edge joints in tiled floors, on wet room & bathroom floors, thresholds and commercial floors.

For a small place like Forestside, the journey and access are planned in advance, and once on site, the job is the same as anywhere.

A 12-month guarantee comes as standard.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Place
Forestside (PO9)
Region
Hampshire
Guarantee
12 months on all our work
Quote
A clear price before any work starts
Call
0345 464 0079
Last updated
26 October 2026

What floor joint sealing looks like in Forestside

Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.

Community buildings like Christ Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.

Forestside is about 4 miles east of Horndean, in Hampshire. Every kind of property in Forestside is covered for floor joint sealing, old or new, large or small. Every job comes with our 12-month guarantee. Forestside is one of 683 towns and villages in Hampshire where we work for floor joint sealing. Portsmouth is on our list too, about 10 miles from Forestside.

Postcode districts we cover here for floor joint sealing: PO9. If you need floor joint sealing at a property on Lodge Lane and Forestside or anywhere close by, our applicators can take on the job. Nearby, we also carry out floor joint sealing in West Marden (1 mile north-east), Chalton (3 miles north-west), Blendworth (3 miles west), Buriton (5 miles north) and Nursted (5 miles north). Further out, we also cover Gosport (13 miles south-west), Havant (5 miles south-west), Fareham (13 miles west), Horndean (4 miles west), Waterlooville (6 miles west) and Petersfield (7 miles north).

Local landmarks in Forestside

Typical jobs here are in homes near Stansted Park and the streets around them. Forestside’s nearest station is Rowlands Castle station, roughly 2.2 miles south-west. Well-known places in the area include Clanfield Earthwork (4 miles north-west) and Havant War Memorial Hospital (5 miles south-west). Open spaces near Forestside include Compton Down and Kingley Vale National Nature Reserve.

Map of Forestside © OpenStreetMap contributors

Common problems we fix in Forestside

Caulk is the usual filler for skirting. In a joint that moves or gets wet, it splits.

The problems people usually mention when they call include:

  • Skirting caulk that keeps splitting
  • Chipped and open joints in warehouse floors
  • Open joints that fill with dirt
  • Gaps at thresholds between rooms

Letting a property close to Rowlands Castle station? Then a tidy floor and skirting joint helps a rental look ready for the next tenant.

What your quote should include

  • How the surfaces are prepared before sealing
  • The length of the guarantee
  • How the colour is chosen
  • Whether they’re fully insured

How to choose a mastic man

How to look after the new joints

Joint life depends on how it’s used and looked after. We suggest:

  • Lift furniture rather than dragging it across joints
  • Walk round the room once a year and look at the edges
  • Avoid sloshing water against skirting
  • Cone off fresh joints until they’re ready

Keep heavy traffic off resealed concrete joints for the cure time we give you. Mark the area off so drivers avoid it while it cures.

Once concrete joint edges start to break, wheels make it worse. Early resealing helps keep the joint intact and the floor safer.

DIY sealant or a professional job?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.

Common questions in Forestside

Can you do floor joint sealing in Forestside?

Yes. We work across London and the South East, and Forestside is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we will give you a clear quote.

Can you help a landlord with a rental near Rowlands Castle station?

Yes, we work for landlords and agents. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.

Is caulk good enough for skirting?

Caulk is fine for dry joints that do not move, but it cracks where there’s movement or water. For most floor joints, we use a flexible sealant.

Do the sealants smell?

That depends on the sealant. Some products have a noticeable smell, others very little.

Do you offer different sealant colours?

We’ll suggest a colour to suit the surroundings. The product needed can limit the range.

Can you reseal concrete floor joints in an industrial unit?

Yes. We clean out the joints and reseal them with a product suited to the floor. Tell us what runs over the floor and we’ll quote.

Can sealant along the skirting be painted?

For painted skirting, we use a flexible product that can be painted. Silicone isn’t made to be painted, so it’s kept for wet areas and unpainted joints.

What should I tell you?

The location, the problem and the rough size of the job. Photos by email help too.

Different surfaces, different methods

Tiled floors

Perimeter joints in tiled floors should be sealant, not grout. We rake out any grout there and reseal.

Concrete floor joints

Old filler, dust and debris are cleaned out of the joint first. We fit backing where needed.

What affects the cost of floor joint sealing

We don’t publish a price list, because no two jobs are the same. What we look at:

  • The product the joint needs
  • How much old sealant there is and how hard it is to remove
  • The number of rooms or windows
  • How much there is to do

Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll explain what it covers.

What to tell us for a quote

To help us quote quickly, let us know:

  • If someone has resealed it before
  • Whether it’s a home or a business
  • The problem you’ve noticed
  • Pictures of the joints, sent by email

We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or drop us an email and describe the job, and pictures are welcome.

Landlords, agents and businesses in Forestside

Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.

The process

Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and clear up. It usually takes a few hours, depending on the length of joint. Somewhere as small as Forestside, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We start by checking the floor, the joint and what traffic it takes.
  2. We remove what’s in the joint now.
  3. The joint is vacuumed clean and backing fitted where needed.
  4. The chosen sealant goes in, coloured to suit the floor.
  5. We tool it neatly and tell you when it can be walked on and cleaned.

How to prepare

  • Mention any tricky access
  • Plan for the work area to be out of bounds to pets and children
  • Mention any sign-in or site rules at work premises

Ask for a quote

We do not publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or email us.

Get a price

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job